Re: [Gpredict-discussion] Icom IC-9100 support?
Real time satellite tracking and orbit prediction
Status: Beta
Brought to you by:
csete
From: Alexandru C. <oz...@gm...> - 2013-07-03 21:13:37
|
Hi Eric, I don't have experience with the IC-9100 and don't know what the native satellite mode means. However, if it is some auto-tracking mode intended for aiding the operator during satellite operations, then it should probably be disabled. Gpredict must have full control over both VFOs without any intervention from the RIG itself. I'm not sure what the current status of full duplex support is. There have been conflicting reports about how good/bad gpredict works with full duplex radios. It's on my list to test and fix this in the near future as I have occasional access to an IC-910. Alex On Wed, Jul 3, 2013 at 3:33 PM, Eric Grumling <egr...@gm...> wrote: > I have been using gpredict on ubuntu 12.04 using an FT-817 and FT-897d dual > radio configuration. This has worked well, although a little clunky. I > recently picked up an Icom IC-9100, which has a native satellite mode. I > have it working with hamlib on both fldigi and gpredict, however gpredict > only tunes the main tuner, no matter what mode I try. I have tried a few > different Icom radio types in rigctld but they all behave about the same. > Note that the IC-9100 is listed as "untested," at least in my version of > hamlib: 1.2.15.1 -stock version from the Ubuntu servers. > > > Some modes will show an error referring to frequency in the terminal if I > run rigctld without the & at the end. I can post the exact error later this > evening, but that only comes up when I get no response from the radio, so I > don't think that's relevant (and might be due to the radio being on the > wrong band). > > I can also try compiling the latest sources, if that will help. > > 73 > Eric > K0JEG > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Gpredict-discussion mailing list > Gpr...@li... > https://lists.sourceforge.net/lists/listinfo/gpredict-discussion |