From: Santiago A. T. <re...@gm...> - 2011-05-30 00:33:40
|
On Sun, May 29, 2011 at 3:21 PM, Marcus Meissner <mei...@su...> wrote: > Hi, > > So the interesting part is quoted: > > On Sun, May 29, 2011 at 10:11:07AM -0400, Santiago Andres Triana wrote: > ... > > > 4.323462 gphoto2-port(2): Setting timeout to 100000 millisecond(s)... > > 4.323488 ptp2/usb_event(2): reading event an error -10 occurred > > 4.323504 gphoto2-port(2): Writing 12=0xc byte(s) to port... > > 4.323520 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows: > > 0000 0c 00 00 00 01 00 13 90-12 00 00 00 ............ > > > > 4.325457 ptp2/ptp_usb_getdata(2): reading data > > 4.325473 ptp2/ptp_usb_getpacket(2): getting next ptp packet > > 4.325488 gphoto2-port(2): Reading 512=0x200 bytes from port... > > ... here it spends 14 seconds waiting for an answer! > > > 16.110491 gphoto2-port(2): Could only read 28 out of 512 byte(s) > > 16.110542 gphoto2-port(3): Hexdump of 28 = 0x1c bytes follows: > > 0000 1c 00 00 00 02 00 13 90-12 00 00 00 10 00 00 00 ................ > > 0010 04 00 02 40 0e 00 00 00-07 00 00 00 ...@........ > > > > 16.110561 ptp2/ptp_usb_getresp(2): reading response > > 16.110575 ptp2/ptp_usb_getpacket(2): getting next ptp packet > > 16.110590 gphoto2-port(2): Reading 512=0x200 bytes from port... > > 16.115462 gphoto2-port(2): Could only read 12 out of 512 byte(s) > > 16.115481 gphoto2-port(3): Hexdump of 12 = 0xc bytes follows: > > 0000 0c 00 00 00 03 00 01 20-12 00 00 00 ....... .... > > > > 16.115497 ptp(2): evdata: nparams=0x1, code=0x4002, trans_id=0xE, p1=0x7, > p2=0x0, p3=0x0 > > As this is the ObjectAdded event for the image, I think the 14 seconds > were really spent saving the image to the card. > > Your card is bad I guess, or could at least be reformatted. > > Ciao, Marcus > Ok, will test with a brand new card (as soon as I can get a hold of one) and will post the timing here. Many thanks! Santiago |