From: SourceForge.net <no...@so...> - 2010-08-05 12:51:41
|
Feature Requests item #3039388, was opened at 2010-08-04 12:34 Message generated for change (Comment added) made by You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=3039388&group_id=8874 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: camera support Group: None Status: Open Resolution: None Priority: 5 Private: No Submitted By: alfredo () Assigned to: Marcus Meissner (marcusmeissner) Summary: Olympus E-520 Initial Comment: gphoto2 --summary --debug --debug-logfile=xx.log > summary.log ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:51 Message: alfredo@AcerBox:~$ gphoto2 --auto-detect Modello Porta ---------------------------------------------------------- ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:43 Message: DSRL connects to the PC via USB cable and the Olympus E-520 shows the menu of choice: I choose "control". This is the procedure with Windows. ---------------------------------------------------------------------- Comment By: alfredo () Date: 2010-08-05 12:42 Message: Collego la DSRL al PC tramite cavo USB e la Olympus E-520 mostra menu di scelta: scelgo "controllo". Questa è la procedura con Windows. Connect DSRL I gave the following commands: alfredo@AcerBox:~$ lsusb Bus 007 Device 003: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 006: ID 07b4:0110 Olympus Optical Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub alfredo@AcerBox:~$ gphoto2 --list-config *** Errore *** Impossibile rilevare alcuna fotocamera *** Errore (-105: "Modello sconosciuto") *** Per ottenere messaggi di debug, usare l'opzione --debug. I messaggi di debug possono aiutare a risolvere i problemi incontrati. Se si ha intenzione di inviare errori o messaggi alla mailing list degli sviluppatori di gphoto <gph...@li...>, eseguire gphoto2 come segue: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --list-config *** Error *** Could not detect any camera *** Error (-105: 'Unknown model') *** For debugging messages, please use the --debug option. Debugging messages may help finding a solution to your problem. If you intend to send any error or debug messages to the gphoto developer mailing list <gph...@li...>, please run gphoto2 as follows: env LANG=C gphoto2 --debug --debug-logfile=my-logfile.txt --debug --debug-logfile=my-logfile.txt --list-config Please make sure there is sufficient quoting around the arguments. alfredo@AcerBox:~$ gphoto2 --summary --debug --debug-logfile=xx.log > summary.log *** Errore *** Si è verificato un errore nella libreria di I/O ("Parametri non corretti"): Nessuna descrizione dell'errore disponibile *** Errore (-2: "Parametri non corretti") *** ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2010-08-05 11:02 Message: seems no capture in PTP mode. the xx.log file would be interesting too, if you can attach it. There is another mode, the "PC Control Mode" which needs to be entered for Olympus. Our documentation has: "Olympus 750 Ultra Zoom:\n" "(1) Olympus 750UZ has a USB PC Control mode. To switch\n" " into 'USB PC control mode', turn on the camera, open\n" " the memory card access door and then press and\n" " hold both the 'OK' and 'quickview' buttons until the\n" " camera control menu appears. Set it to control mode.\n" Something similar (opening the memory card housing, and pressing two buttons at once should get to this menu. It should be the same as for Windows. (if you can specify the exact how to for the e-520 it would help others too.) ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=3039388&group_id=8874 |