[gphoto-features] [ gphoto-Feature Requests-1391308 ] Support for Ricoh Caplio RR10 camera ?

[SourceForge.net <no...@so...>]

Feature Requests item #1391308, was opened at 2005-12-27 11:53
Message generated for change (Settings changed) made by hub
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1391308&group_id=8874

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: camera support
Group: None
Status: Open
Resolution: None
>Priority: 1
Private: No
Submitted By: fleww (fleww)
Assigned to: Nobody/Anonymous (nobody)
Summary: Support for Ricoh Caplio RR10 camera ?

Initial Comment:
Hi,
I'm trying to use gphoto with my Ricoh Caplio RR10
camera. I've tried to specify the camera model on the
gphoto2 command line with theses models:
"Ricoh Caplio R1" (TESTING)
"Ricoh Caplio R1v" (TESTING)
"Ricoh Caplio RR30" (TESTING)
But without success.
my vendor/pructid couple is : Vendor=05ca ProdID=2701
Is there anything I can do ?

----------------------------------------------------------------------

Comment By: Marcus Meissner (marcusmeissner)
Date: 2005-12-30 04:13

Message:
Logged In: YES 
user_id=48092

to summarize...  
  
the camera is one from before the G3 series, so the g3  
driver will not support it.  
 
usual methods of reverse engineering need to be applied. 

----------------------------------------------------------------------

Comment By: fleww (fleww)
Date: 2005-12-28 15:18

Message:
Logged In: YES 
user_id=1413712

Here's the bloc added in my /proc/bus/usb/devices when I
plugged my camera:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12 
MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05ca ProdID=2701 Rev= 1.00
S:  Manufacturer=ZORAN
S:  Product=COACH DSC
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=00(>ifc ) Sub=00 Prot=00
Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

Unfortunately, this is what I get when trying this command:
# gphoto2 --usbid 0x5ca:0x2204=0x5ca:0x2701 --auto-detect
Model                          Port                        
                   
----------------------------------------------------------
#

He seems to find the port on which my camera is attached
# gphoto2 --list-ports
Devices found: 7                                           
                   
Path                             Description
--------------------------------------------------------------
serial:/dev/ttyS0                Serial Port 0             
     
serial:/dev/ttyS1                Serial Port 1             
     
serial:/dev/ttyS2                Serial Port 2             
     
serial:/dev/ttyS3                Serial Port 3             
     
usb:                             Universal Serial Bus      
     
usb:004,002                      Universal Serial Bus      
     
usb:003,003                      Universal Serial Bus      
     
# 


----------------------------------------------------------------------

Comment By: Marcus Meissner (marcusmeissner)
Date: 2005-12-28 06:27

Message:
Logged In: YES 
user_id=48092

can you post a cat /proc/bus/usb/devices snippet when the 
camera is attached? 
 
try: 
gphoto2 --usbid 0x5ca:0x2204=0x5ca:0x2701 --auto-detect 

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1391308&group_id=8874