Re: [Fwbuilder-discussion] No occur DNAT
Brought to you by:
mikehorn
From: Usuário do S. <mai...@ig...> - 2011-03-30 20:44:47
|
Great! now it's working! Em 30 de março de 2011 12:08, Vadim Kurland <va...@ne...> escreveu: > > > 2011/3/30 Usuário do Sistema <mai...@ig...> > >> Hello everyone, I'm with a case in my Firewall ( Fwbulder 4.1.3 ) that it >> isn't occur NAT when packages flow from inside network to own ip address >> interface outside firewall. >> >> my interfaces: >> >> eth0: 128.2.8.71 - inside network >> eth1:200.247.209.11 - here are all outside ( Internet IP ) ip address but >> the case it's with 200.247.209.11 >> >> I'm needing when an inside machine access the address 200.247.209.11 ( >> this is an application IP ,which, has a DNAT to a inside machine ( >> 128.2.7.26 ) that host the application ) my firewall does DNAT as it's doing >> well when the flow come from Internet. >> >> however, when the packeges arrives ( from a inside machine to >> 200.247.209.11 ) in 128.2.7.26 it come with original IP address of >> source.never occur the DNAT when the source is an inside IP address.from >> Internet all it's work! >> >> so when the source is inside to 200.247.209.11 it isn't work the access. >> >> >> any Tips for this case ?? what can I do for always occur DNAT regardless >> if source be an inside ip address. >> >> > > I think this should help: > > http://www.fwbuilder.org/4.0/docs/users_guide/dnat_to_same_network.html > > --vk > > >> |