#337 ata2: DISCONNECT requested

v0.686bx
closed
nobody
1
2012-10-28
2008-03-04
Gadgo
No

Hi everybody,

I try to get FreeNAS 0.686.1 stable running since a couple of days. Installations with usb cdrom works fine, but when rebuilding graid5 array "RaidDATA", after a couple of minutes (no exact time - varies an can be just a few seconds after reboot), the system hangs, last message on console saying "ata2: DISCONNECT requested". I searched FreeBSD newsgroups, and you can find some issues, but no solution.

Hardware:
ASROCK Board with Sempron Proc., everything disabled except for IDE0 (Transcend Flash 512MB) and COM1
using PCI card SATA controller <SiI 3112="" SATA150="" controller=""> and onboard controller <VIA 6420="" SATA150="" controller=""> attached: 4x Maxtor 300GB

Do you need further information?

Thx for your help

Gadgo

PS: ACPI on or off does not change the matter

Discussion

  • Gadgo
    Gadgo
    2008-03-04

    System Log

     
    Attachments
  • Dan Merschi
    Dan Merschi
    2008-03-10

    Logged In: YES
    user_id=1512153
    Originator: NO

    Search the forum for SIL 3112 controller(fake raid) and you will find the solution.

    Regards,
    Dan

     
  • Logged In: YES
    user_id=1312539
    Originator: NO

    This Tracker item was closed automatically by the system. It was
    previously set to a Pending status, and the original submitter
    did not respond within 14 days (the time period specified by
    the administrator of this Tracker).