error installing fjbtndrv-2.0.1 on Jaunty

2009-07-05
2013-05-08
  • Rex von Shiro
    Rex von Shiro
    2009-07-05

    Hai,

    I try to install fjbtndrv-2.0.1.tar.gz under U.904 (Jaunty) but has no luck so far.
    The notebook is Fujitsu P1510.

    I write :
    "$ ./configure --disable-wacom"

    but it gives me error message :
    "checking for XINPUT... configure: error: Package requirements (x11 xi xext xtst) were not met:

    No package 'xi' found
    No package 'xtst' found"

    Here's my "xinput list" result :
    "Virtual core pointer"    id=0    [XPointer]
        Num_buttons is 32
        Num_axes is 2
        Mode is Relative
        Motion_buffer is 256
        Axis 0 :
            Min_value is -1
            Max_value is -1
            Resolution is 0
        Axis 1 :
            Min_value is -1
            Max_value is -1
            Resolution is 0
    "Virtual core keyboard"    id=1    [XKeyboard]
        Num_keys is 248
        Min_keycode is 8
        Max_keycode is 255
    "touchscreen"    id=2    [XExtensionPointer]
        Num_buttons is 3
        Num_axes is 2
        Mode is Absolute
        Motion_buffer is 256
        Axis 0 :
            Min_value is 82
            Max_value is 4036
            Resolution is 1024
        Axis 1 :
            Min_value is 146
            Max_value is 3999
            Resolution is 1024
    "Video Bus"    id=3    [XExtensionKeyboard]
        Num_keys is 248
        Min_keycode is 8
        Max_keycode is 255
    "AT Translated Set 2 keyboard"    id=4    [XExtensionKeyboard]
        Num_keys is 248
        Min_keycode is 8
        Max_keycode is 255
    "Fujitsu FUJ02B1"    id=5    [XExtensionKeyboard]
        Num_keys is 248
        Min_keycode is 8
        Max_keycode is 255
    "Macintosh mouse button emulation"    id=6    [XExtensionPointer]
        Num_buttons is 32
        Num_axes is 2
        Mode is Relative
        Motion_buffer is 256
        Axis 0 :
            Min_value is -1
            Max_value is -1
            Resolution is 1
        Axis 1 :
            Min_value is -1
            Max_value is -1
            Resolution is 1
    "DualPoint Stick"    id=7    [XExtensionPointer]
        Num_buttons is 32
        Num_axes is 2
        Mode is Relative
        Motion_buffer is 256
        Axis 0 :
            Min_value is -1
            Max_value is -1
            Resolution is 1
        Axis 1 :
            Min_value is -1
            Max_value is -1
            Resolution is 1
    "AlpsPS/2 ALPS DualPoint TouchPad"    id=8    [XExtensionPointer]
        Num_buttons is 12
        Num_axes is 2
        Mode is Relative
        Motion_buffer is 256
        Axis 0 :
            Min_value is 0
            Max_value is 1023
            Resolution is 1
        Axis 1 :
            Min_value is 0
            Max_value is 767
            Resolution is 1
    "Logitech Optical USB Mouse"    id=9    [XExtensionPointer]
        Num_buttons is 32
        Num_axes is 2
        Mode is Relative
        Motion_buffer is 256
        Axis 0 :
            Min_value is -1
            Max_value is -1
            Resolution is 1
        Axis 1 :
            Min_value is -1
            Max_value is -1
            Resolution is 1

    I have managed to set the touchscreen and fingerprint function to work.
    Now, I need some help (suggestion, patch, anything) for these 5 buttons (under the screen) to work if I fold it to became tablet.

    Thanks for your attention and suggestion.

    Rgds,
    Rex

     
    • Robert Gerlach
      Robert Gerlach
      2009-07-06

      > No package 'xi' found
      > No package 'xtst' found"

      Install libxi-dev and libxtst-dev (or xorg-dev) and try again.

        Robert

       
      • Rex von Shiro
        Rex von Shiro
        2009-07-11

        I have succeeded installing the file. However, I still have my touchscreen doesn't work as expected in tablet mode. Could it be because I have set the touchscreen to be activated before I install the fjbtndrv ?
        FYI, before I compile and install the fjbtndrv, I have managed to run the touchscreen perfectly in normal mode (not tablet). Also I have modified the xorg.conf.
        Does this fjbtndrv manage the touchscreen function as well ? So I might have to remove modified xorg.conf (back to original) then re-compile the fjbtndrv with wacom feature enable ?

        Please advise me ... Thanks.

        Rgds,
        Rex.

         
        • Robert Gerlach
          Robert Gerlach
          2009-07-11

          I think the configure script doesn't find the linuxwacom headers and/or library. It's a known issue with debian and ubuntu (LP: #5918). You should build and install linuxwacom yourself or try my ubuntu packages from https://launchpad.net/~khnz/+archive/ppa. Hope this helps.

           
          • Rex von Shiro
            Rex von Shiro
            2009-07-12

            Ok...
            I have seen your PPA repos ..... I will try the 2.0-4
            Thanks for the advice..

            Rgds,
            Rex.

             
    • Rex von Shiro
      Rex von Shiro
      2009-07-07

      Ohh .... never thought of it ...
      I'll try.

      Thanks for the help