From: Jonathan W. <jw...@ju...> - 2012-09-26 23:45:48
|
Hi Jorn > >So in the first place if you could verify the above list of things which > >work it will give me a decent sync point to start looking at this again. I > >would also be interested in seeing the "-v 6" output when running jackd > >(just the portion of output generated during streaming startup, which lasts > >for the first few seconds). > > ok, just updated ffado to latest svn. streaming starts reliably, and > i can start ffado-mixer. Ok, that's a good start. > no widgets except the sample clock setting are working: > > 20:49:59 dbus: Failed to set Discrete > /org/ffado/Control/DeviceManager/0001f200000055c9/Mixer/Mainout_fader > on server org.ffado.Control That's no surprise: the 828mk1 does not have any low level interface to the mixer controls defined yet. ffado-mixer should not be displaying any controls so that's something I'll look into. Or more precisely, I'll look into activating at least some of the more useful mixer controls, such as the optical mode setting. > it is not possible to change the mode of the toslink input to adat, hence > i cannot lock to adat either. As above, I'll see if I can get at least this portion of the control system working to allow this to be tested. > if i leave the clock source set to something it cannot lock to, > jackd will crash after a few seconds. That doesn't come as a complete surprise. I'm not sure we can do anything about that because I am not aware of a method to determine whether this interface indicates its lock status anywhere. > the output of /usr/local/bin/jackd -P70 -dfirewire -v6 -r48000 > -p512 -n4 > /tmp/ffado-motu.log 2>&1 is at > http://stackingdwarves.net/download/ffado-motu.log Thanks for this. > tomorrow i'll look at the actual signals going in and out of the > device. right now, my main studio machine is recovering from a > dropped disk in its raid, so i don't want to load it with anything > else... That's fair enough. Thank you for what you've done so far. Regards jonathan |