From: Ole B. <ob...@da...> - 2010-10-25 19:35:42
|
On 2010-10-25 21:28, Stefan Richter wrote: > Ole Bromose wrote: >> firecontrol does not report any reset. What I saw at several occasions >> was that the power light on the Pro 26 flashed for a couple of seconds >> just as when clicking "Identify Device", so I thought it was a reset. In >> most cases: the monitor output vanishes. and I must power on/off and >> restart jack/ffado in order to have it back. > OK. As far as I understood discussions about the Split_Timeout register of > the iee1394 core kernel driver (and firewire-core driver), the Pro 26 might > belong to the class of audio devices whose chipset becomes briefly > unresponsive during certain asynchronous transactions. It performs the > request but sends the response later than the standard value in Split_Timeout > allows. However, FFADO has this issue covered as it increases Split_Timeout > such that it won't miss the somewhat late device response. > > Maybe the issue that you are seeing is a different (though much graver) > symptom of the same inherent hardware weakness. Or maybe not. > > Do you power the Pro 26 via FireWire or via its own PSU? If the former, try > the latter (and the other way around if possible). I'm powering the Pro 26 via its own supply. My laptop has only a 4-wire connection, so I cannot power the 26 from the laptop. Regards Ole |