Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

#56 Audigy2 no sound Edit

audigy
open
nobody
playback (26)
5
2012-07-08
2003-01-22
Anonymous
No

Hello,
My System:
Board Abit nf7 : chip nforce2
Soundcard Audigy2 Plat.

Debian sid 2.4.20

All modules is loadet
Kernel find the Soundcard
emu-tools give me all avail output

but no sound

Discussion

  • Logged In: NO

    Here the forgeten upload system

    lspci -v

    01:0a.0 Multimedia audio controller: Creative Labs SB Audigy
    (rev 04)
    Subsystem: Creative Labs: Unknown device 1002
    Flags: bus master, medium devsel, latency 32, IRQ 12
    I/O ports at d400 [size=64]
    Capabilities: [dc] Power Management version 2

    01:0a.1 Input device controller: Creative Labs SB Audigy
    MIDI/Game port (rev 04)
    Subsystem: Creative Labs: Unknown device 0060
    Flags: bus master, medium devsel, latency 32
    I/O ports at d800 [size=8]
    Capabilities: [dc] Power Management version 2

    dmesg

    Creative EMU10K1 PCI Audio Driver, version 0.20a, 19:19:09
    Jan 22 2003
    emu10k1: Audigy rev 4 model 0x1002 found, IO at
    0xd400-0xd43f, IRQ 12
    ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel
    STAC9721/23)

    lsmod

    matrix:/home/cu/emu10k1-v0.20a# lsmod
    Module Size Used by Tainted: P
    emu10k1 66600 0
    ac97_codec 10376 0 [emu10k1]
    soundcore 3652 4 [emu10k1]
    nvidia 1466944 10
    hid 13896 0 (unused)
    usb-ohci 18952 0 (unused)

    Kernel

    matrix:~# uname -a
    Linux matrix 2.4.20 #13 Mit Jan 22 18:49:52 CET 2003 i686
    unknown unknown GNU/Linux

    misc

    matrix:~# emu-config -I
    Driver version: 0.20
    mixer interface version: 2
    Card type: Audigy

    Output Status:
    Output Connected:
    Analog Rear
    Analog Front
    Digital/Analog center-sub

    Output mode: Analog
    Output Spdif Frequency: 48

    Digital Input Status:
    CD digital : N/A, Freq: 0.000 kHz
    Optical In : N/A, Freq: 0.000 kHz
    RCA Spdif In: N/A, Freq: 0.000 kHz

    devices are rw

     
  • Logged In: NO

    I got EXACTLY the same problem!!!

    If anyone have a clue on this, please
    email me at Altair@home.se

    Best regards!!
    /Johan

     
  • C Fulmer
    C Fulmer
    2003-11-15

    Logged In: YES
    user_id=68384

    >
    >matrix:/home/cu/emu10k1-v0.20a# lsmod
    >
    didn't state if your using v0.20a or a cvs pull of the driver that still has .20 written all over it still, but from the directory in your paste hints to .20a.

    if the module version your using is v0.20a from the tarball on sf.net, then it won't work since it only supports up to audigy1's, you need the cvs version of the driver from sometime at least in the past 6 or so months.

    just paste the commands from
    http://sourceforge.net/cvs/?group_id=44773
    and replace modulename with emu10k1

     


Anonymous


Cancel   Add attachments