From: Mike L. <mi...@fi...> - 2009-01-07 01:48:57
|
2009/1/7 Jesse Barnes <jb...@vi...>: > On Tuesday, January 6, 2009 3:53 pm Mike Lothian wrote: >> 2009/1/6 Jesse Barnes <jb...@vi...>: >> > On Tuesday, January 6, 2009 2:35 pm Mike Lothian wrote: >> >> Hi there >> >> >> >> Thought I'd send in some info about Xorg with a KMS kernel, libdrm and >> >> xf86-video-intel >> >> >> >> I've attached my dmesg and Xorg.0.log >> >> >> >> The only outputs are LVDS 15" screen an a disconnected VGA out and >> >> HDMI connectors >> >> >> >> I'll quite happily submit a bug but thought the code was a little too >> >> new to harp on about especially if this is a known issue >> >> >> >> Let me know if I can help further >> > >> > Looks like the 3D driver init failed... Maybe you need to rebuild your >> > DRI driver as well against the same libdrm? >> >> I rebuild libdrm mesa and xf86-video-intel each time is there >> something else I'm missing? > > This one looks like a Mesa mismatch somehow, so try rebuilding that too. > > -- > Jesse Barnes, Intel Open Source Technology Center > OK I've recompiled libdrm mesa and xf86-video-intel using their master tree's and recompiled the head drm-intel-next branch of the kernel the versions I were using before were only a few hours old Good news X starts, bad news is the screen goes black once KDE starts to load, pretty sure it's when the compositing is started Another strange things happened, normally with KMS all my VTs are at the laptops native resolution now they're in the top left corner at what looks like 800x600 but not streched Also when booting from a non-KMS but regular GEM kernel UXA doesn't work now. I've had to switch back to EXA I'm attaching my dmesg and Xorg log from the KMS retry Could any of the problems be caused by: [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 Cheers Mike |