From: Leigh D. <lsd...@ec...> - 2003-07-24 02:51:00
|
On Wed, 2003-07-23 at 01:59, Michel Dänzer wrote: > On Tue, 2003-07-22 at 07:06, Leigh Dyer wrote: > > > > I've just been lucky enough to get a 1Ghz Powerbook G4 with 64Mb Radeon > > Mobility 9000 to work on, > > Great machine, isn't it? :) > It's beautiful :) - so much so that my boss pinched it from me for a day, so I've only now had another chance to play with it. > BTW, are you not using my dri-trunk-sid packages intentionally? > I'd heard about them, but noticed that they didn't seem to have been updated in a while, so I wasn't sure if they were still the best way to go. After I sent my mail the other day, I did actually try your packages, and they worked without any problems. Now, for patch testing: The radeon-accel-init.diff patch seemed to work okay at first - the X server started normally, but with DRI disabled, as expected. I've attached my X log confirming this. After applying the drm-agp-acquire.diff patch, the X server begins to load, and the log shows that AGP initialisation fails, the system drops back to PCI mode, and DRI is enabled. However, initialisation stops at the line: (II) RADEON(0): Acceleration enabled I've attached the log of this session as well. I also happened to accidentally test the server using a DRM module compiled from your packaged sources, and it stopped in the same place (though I didn't think to check whether or not AGP or DRI were successfully enabled). Thanks Leigh |