From: <sb...@fe...> - 2004-10-28 23:42:36
|
what says ? glxinfo | grep dire you can try debug gdb glxgears run if you get 0x401498c8 in _mesa_test_os_sse_exception_support () from /usr/X11R6/lib/modules/dri/savage_dri.so continue if stop bt=20 On Thu, 2004-10-28 at 14:13, Ik wrote: > Hello list, I have been trying to enable dri for my matrox G400 card. >=20 > I run kernel 2.6.9 with agpgart and matrox compiled in the kernel, > and the stock xorg that came with slackware 10. >=20 > Xlog actually tells me: >=20 > (II) MGA(0): [drm] installed DRM signal handler > (II) MGA(0): [DRI] installation complete > (II) MGA(0): [drm] Mapped 128 DMA buffers > (II) MGA(0): [drm] dma control initialized, using IRQ 12 > (=3D=3D) MGA(0): Direct rendering enabled >=20 > but when I run glxinfo(or gears) i get: >=20 > libGL error: InitDriver failed >=20 > I did a ldd on glxgears: >=20 > cola@hermes:~$ ldd /usr/X11/bin/glxgears > libGL.so.1 =3D> /usr/X11R6/lib/libGL.so.1 (0xb7f5d000) > libXext.so.6 =3D> /usr/X11R6/lib/libXext.so.6 (0xb7f4f000) > libX11.so.6 =3D> /usr/X11R6/lib/libX11.so.6 (0xb7e87000) > libpthread.so.0 =3D> /lib/libpthread.so.0 (0xb7e36000) > libm.so.6 =3D> /lib/libm.so.6 (0xb7e13000) > libc.so.6 =3D> /lib/libc.so.6 (0xb7ce4000) > libXxf86vm.so.1 =3D> /usr/X11R6/lib/libXxf86vm.so.1 (0xb7cdf000) > libdl.so.2 =3D> /lib/libdl.so.2 (0xb7cdc000) > /lib/ld-linux.so.2 =3D> /lib/ld-linux.so.2 (0xb7fec000) >=20 > According to the section 'troubleshooting' this is in order. > after this i quite finished that section and I wonder if dri is workin=20 > now, and glxgears just lying or something else? >=20 --=20 S=E9rgio M. B. --=20 S=E9rgio M. B. |