Re: [Dri-users] mach64 dri problem: "Not enough memory for local textures, disabling DRI"

[Dave D. <da...@ea...>]

> > Is this a PCI or AGP card? How much memory does it have?
>=20
> PCI, 8MB.

Thanks for clarifying this Colin.

> Anyway they're useless on this config.

Ah...I'll remove them then.  I figued 'ForcePCIMode' would
be, but I didn't really know what 'LocalTextures' did...
was using trial and error mode.

Thanks again,
Dave


On Sun, 2002-10-27 at 22:41, Colin Leroy wrote:
> On Sun, 27 Oct 2002 23:32:03 +0100 Felix K=FChling <fx...@gm...> wrote=
:
>=20
> Hi Felix,
>=20
> > Is this a PCI or AGP card? How much memory does it have?
>=20
> PCI, 8MB.
>=20
> > I believe this is the problem. If you are running with 32 or 24 bit
> > color depth you should reduce it to 16 bits. This will probably free up
> > enough memory for local textures. If that doesn't help, try reducing th=
e
> > virtual screen size.
>=20
> 1024x768x16 is ok.
>=20
> > > Option "PorcePCIMode"   "true"
> > > Option "LocalTextures"  "true"
> >=20
> > I am not familiar with these options.
>=20
> Anyway they're useless on this config.
> --=20
> Colin -
> Il y a 10 sortes de personnes dans le monde.
> Ceux qui comptent en  binaire et les autres.
>=20
>=20
> -------------------------------------------------------
> This SF.net email is sponsored by: ApacheCon, November 18-21 in
> Las Vegas (supported by COMDEX), the only Apache event to be
> fully supported by the ASF. http://www.apachecon.com
> _______________________________________________
> Dri-users mailing list
> Dri...@li...
> https://lists.sourceforge.net/lists/listinfo/dri-users