I am not sure whether it is the right place to report my probelm, but after
installing latest version of slackware 11 I experience problem with Xorg and
AGP and PCI cards. Previous version worked fine with these cards and I could
use Xorg with two monitors at once. now using old config file or new one
create by xorgsetup I get this message and only monitor connected to AGP
I tried changing BIOS settings so that PCI card were initiated first, but
then only monitor with PCI card works. moreover I did not have to change the
BIOS settings to make these cards work in previous version.
(II) RADEON(1): Monitor name: Acer AL1914
(II) RADEON(1): Primary:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- External
DDC Type -- VGA_DDC
(II) RADEON(1): Secondary:
Monitor -- NONE
Connector -- DVI-D
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(WW) RADEON(1): Video BIOS not detected, using default clock settings!
(WW) RADEON(1): Clock not counting...
(WW) RADEON(1): Failed to probe xtal value ! Using default 27Mhz
*** If unresolved symbols were reported above, they might not
*** be the reason for the server aborting.
0: X(xf86SigHandler+0x8a) [0x8088b2a]
2: X(InitOutput+0xb83) [0x8072713]
3: X(main+0x226) [0x80d4496]
4: /lib/tls/libc.so.6(__libc_start_main+0xd4) [0xb7daee14]
5: X [0x806ff61]
Fatal server error:
Caught signal 8. Server aborting