John, thanx for your info. I suspected something like this is the case.

Greetings,

Chris Höfgen

 

From: John Jore [mailto:john@jore.no]
Sent: dinsdag 29 maart 2011 11:28
To: devil-linux-discuss@lists.sourceforge.net
Subject: Re: [Devil-Linux-discuss] Devil Linux on Compacq Flash Cardafter upgrade from 1.3.6 to 1.4.2 ide=nodma not working anymore

 

Christian,

This is probably not be helpful, but I have the same issue with the OpenFiler distribution. I used to run it off a Compact Flash on kernel versions 2.6.26 and earlier, but it stopped working on 2.6.29 with something similar to your message.

Afaik, it was tracked down to the legacy IDE package being removed from the kernel, with the “new and improved” IDE/SATA interface not working very well against CF and IDE devices for some users. I ended up swapping the CF with a SATA SDD device.

 

I _thought_ it has been fixed in 2.6.3x kernels, but no idea what kernel version DL 1.4.2 or 1.3.6 uses, so this may not be related to your issue…

 

JJ

 

 

From: Christian Höfgen [mailto:c.hofgen@endon.nl]
Sent: 29. mars 2011 14:06
To: devil-linux-discuss@lists.sourceforge.net
Subject: [Devil-Linux-discuss] Devil Linux on Compacq Flash Card after upgrade from 1.3.6 to 1.4.2 ide=nodma not working anymore

 

I try to upgrade our Devil Linux version 1.3.6 which is installed on a Compaq Flash Card  to the latest 1.4.2 version.

On 1.3.6 with boot loader Grub, and parameter “ide=nodma” it workt fine.

 

With version 1.4.2 I get DMA timeout error

Getting the message “had: ide_dma_sff_timer_expired: DMA status (0x21)”

Than the message “had: DMA disabled”

And then the system hangs on the message  “ide0: reset time-out, stutus=0x80”

 

I am not yet so familiar with Linux.

But as far as I can see it looks like Grub has not been changed. It looks like the boot parameter “ide=nodma” is not picked up any more at boot time.

 

Help would be appreciate.

Greetings,
Chris Höfgen