routers

wimpunk

Introduction about the supported routers

DDclient can get the needed IP-address on a lot of different ways. By default, it fetches it's IP from the internet but you can it also from a router or specify it yourself.

DDclient supports a lot of different routers. To configure your favourite router, modify your use-line in your configuration to something like -use=linksys-ver2. Don't forget to put your router password and login in the configuration.

If your favourite router isn't here, try to run ddclient --help. This list is rather incomplete so there are a few more routers supported by the most recent version of ddclient.

Non router option

option information
-use=web obtain IP from an IP discovery page on the web.
-use=if obtain IP from the -if {interface}. This is the default way if none is specified.
-use=ip obtain IP from -ip {address}.
-use=cmd obtain IP from the -cmd {external-command}.
-use=fw obtain IP from the firewall specified by `-fw {type

Incomplete list of supported routers

option information
-use=3com-3c886a obtain IP from 3com 3c886a 56k Lan Modem at the -fw {address}.
-use=3com-oc-remote812 obtain IP from 3com !OfficeConnect Remote 812 at the -fw {address}.
-use=alcatel-stp obtain IP from Alcatel Speed Touch Pro at the -fw {address}.
-use=allnet-1298 obtain IP from Allnet 1298 at the -fw {address}.
-use=cayman-3220h obtain IP from Cayman 3220-H DSL at the -fw {address}.
-use=cisco obtain IP from Cisco FW at the -fw {address}.
-use=dlink-604 obtain IP from D-Link DI-604 at the -fw {address}.
-use=dlink-614 obtain IP from D-Link DI-614+ at the -fw {address}.
-use=e-tech obtain IP from E-tech Router at the -fw {address}.
-use=elsa-lancom-dsl10 obtain IP from ELSA !LanCom DSL/10 DSL FW at the -fw {address}.
-use=elsa-lancom-dsl10-ch01 obtain IP from ELSA !LanCom DSL/10 DSL FW (isdn ch01) at the -fw {address}.
-use=elsa-lancom-dsl10-ch02 obtain IP from ELSA !LanCom DSL/10 DSL FW (isdn ch01) at the -fw {address}.
-use=linksys obtain IP from Linksys FW at the -fw {address}.
-use=linksys2 obtain IP from Linksys FW ver 2 at the -fw {address}.
-use=maxgate-ugate3x00 obtain IP from !MaxGate UGATE-3x00 FW at the -fw {address}.
-use=netgear-rt3xx obtain IP from Netgear FW at the -fw {address}.
-use=netopia-r910 obtain IP from Netopia R910 FW at the -fw {address}.
-use=smc-barricade obtain IP from SMC Barricade FW at the -fw {address}.
-use=sohoware-nbg800 obtain IP from SOHOWare !BroadGuard NBG800 at the -fw {address}.
-use=vigor-2200usb obtain IP from Vigor 2200 USB at the -fw {address}.
-use=watchguard-soho obtain IP from Watchguard SOHO FW at the -fw {address}.
-use=xsense-aero obtain IP from Xsense Aero at the -fw {address}.

Remember, if your router isn't here, check the result of ddclient --help

Other configurations


Related

Wiki: Home
Wiki: usage