From: Filippo G. <fi...@es...> - 2014-08-04 09:42:12
|
hi, thanks for ddccontrol! I recently got a dell u2414h which seems to be responding to ddc over displayport just fine (haven't tried hdmi yet). Below there's output from parse-edid and ddccontrol -p -c -d. I tried setting the brightness and seems to respond as expected. HTH, filippo # get-edid | parse-edid This is read-edid version 3.0.1. Prepare for some fun. Attempting to use i2c interface No EDID on bus 0 No EDID on bus 1 No EDID on bus 2 No EDID on bus 3 No EDID on bus 4 No EDID on bus 5 1 potential busses found: 6 256-byte EDID successfully retrieved from i2c bus 6 Looks like i2c was successful. Have a good day. Checksum Correct Section "Monitor" Identifier "DELL U2414H" ModelName "DELL U2414H" VendorName "DEL" # Monitor Manufactured week 17 of 2014 # EDID version 1.4 # Digital Display DisplaySize 530 300 Gamma 2.20 Option "DPMS" "true" Horizsync 30-83 VertRefresh 56-76 # Maximum pixel clock is 170MHz #Not giving standard mode: 1152x864, 75Hz #Not giving standard mode: 1280x1024, 60Hz #Not giving standard mode: 1600x900, 60Hz #Not giving standard mode: 1600x1200, 60Hz #Not giving standard mode: 1920x1080, 60Hz #Extension block found. Parsing... Modeline "Mode 13" +hsync +vsync Modeline "Mode 0" +hsync +vsync Modeline "Mode 1" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync Modeline "Mode 2" 74.250 1920 2008 2052 2200 1080 1082 1087 1125 +hsync +vsync interlace Modeline "Mode 3" 74.250 1280 1390 1420 1650 720 725 730 750 +hsync +vsync Modeline "Mode 4" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync Modeline "Mode 5" 27.027 720 736 798 858 480 489 495 525 -hsync -vsync Modeline "Mode 6" 27.027 1440 1478 1602 1716 480 484 487 525 -hsync -vsync interlace Modeline "Mode 7" 27.000 1440 1464 1590 1728 576 578 581 625 -hsync -vsync interlace Modeline "Mode 8" 25.200 640 656 752 800 480 490 492 525 -hsync -vsync Modeline "Mode 9" 74.250 1920 2448 2492 2640 1080 1082 1089 1125 +hsync +vsync interlace Modeline "Mode 10" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync Modeline "Mode 11" 27.000 720 732 796 864 576 581 586 625 -hsync -vsync Modeline "Mode 12" 74.250 1280 1720 1760 1980 720 725 730 750 +hsync +vsync Modeline "Mode 14" +hsync +vsync interlace Modeline "Mode 15" +hsync +vsync Modeline "Mode 16" -hsync -vsync Option "PreferredMode" "Mode 13" EndSection ddccontrol version 0.4.2 Copyright 2004-2005 Oleg I. Vdovikin (ol...@cs...) Copyright 2004-2006 Nicolas Boichat (ni...@bo...) This program comes with ABSOLUTELY NO WARRANTY. You may redistribute copies of this program under the terms of the GNU General Public License. Probing for available monitorsI/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/DELA0A2.xml" Document not parsed successfully. I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/DELlcd.xml" Document not parsed successfully. ....... Detected monitors : - Device: dev:/dev/i2c-6 DDC/CI supported: Yes Monitor Name: VESA standard monitor Input type: Digital (Automatically selected) Reading EDID and initializing DDC/CI at bus dev:/dev/i2c-6... I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/DELA0A2.xml" Document not parsed successfully. I/O warning : failed to load external entity "/usr/share/ddccontrol-db/monitor/DELlcd.xml" Document not parsed successfully. EDID readings: Plug and Play ID: DELA0A2 [VESA standard monitor] Input type: Digital =============================== WARNING =============================== There is no support for your monitor in the database, but ddccontrol is using a basic generic profile. Many controls will not be supported, and some controls may not work as expected. Please update ddccontrol-db, or, if you are already using the latest version, please send the output of the following command to ddc...@li...: LANG= LC_ALL= ddccontrol -p -c -d Thank you. =============================== WARNING =============================== Capabilities: Raw output: (prot(monitor)type(lcd)model(U2414H)cmds(01 02 03 07 0C E3 F3)vcp(02 04 05 08 10 12 14(01 04 05 06 08 09 0B 0C) 16 18 1A 52 60( 0F 10 11 12) AA(01 02 04) AC AE B2 B6 C6 C8 C9 D6(01 04 05) DC(00 02 03 05 ) DF F0(00 08) FD E0 E1 E2(00 01 02 04 0B 0C 0D 0F 10 11 13 14 19) F1 F2)mccs_ver(2.1)mswhql(1)) Parsed output: VCP: 02 04 05 08 10 12 14 16 18 1a 52 60 aa ac ae b2 b6 c6 c8 c9 d6 dc df e0 e1 e2 f0 f1 f2 fd Type: LCD Controls (valid/current/max) [Description - Value name]: Control 0x02: +/2/2 C [???] Control 0x04: +/0/255 C [Restore Factory Defaults] Control 0x05: +/0/1 C [Restore Brightness and Contrast] Control 0x06: +/0/255 [???] Control 0x08: +/0/255 C [Restore Factory Default Color] Control 0x0b: +/0/24028 [???] Control 0x0c: +/1/255 [???] Control 0x0e: +/50/100 [???] Control 0x10: +/59/100 C [Brightness] Control 0x12: +/45/100 C [Contrast] Control 0x14: +/5/12 C [???] Control 0x16: +/100/100 C [Red maximum level] Control 0x18: +/97/100 C [Green maximum level] Control 0x1a: +/100/100 C [Blue maximum level] Control 0x1e: +/0/2 [???] Control 0x20: +/249/100 [???] Control 0x30: +/11/100 [???] Control 0x3e: +/50/100 [???] Control 0x52: +/16/255 C [???] Control 0x60: +/15/14 C [Input Source Select] Control 0x6c: +/128/255 [???] Control 0x6e: +/128/255 [???] Control 0x70: +/128/255 [???] Control 0xa8: +/0/3 [???] Control 0xaa: +/1/255 C [OSD Orientation - Landscape] Control 0xac: +/1964/1 C [???] Control 0xae: +/6000/0 C [???] Control 0xb2: +/1/8 C [???] Control 0xb4: +/1/2 [???] Control 0xb6: +/3/5 C [???] Control 0xc0: +/90/65535 [???] Control 0xc6: +/17868/65535 C [???] Control 0xc8: +/22021/0 C [???] Control 0xc9: +/258/65535 C [???] Control 0xca: +/2/2 [???] Control 0xd6: +/1/255 C [DPMS Control - On] Control 0xdc: +/0/255 C [???] Control 0xdf: +/513/255 C [???] Control 0xe0: +/0/1 C [???] Control 0xe1: +/0/1 C [Power control - Off] Control 0xe2: +/0/255 C [???] Control 0xe3: +/0/1 [???] Control 0xf0: +/0/255 C [???] Control 0xf1: +/3/255 C [???] Control 0xf2: +/0/255 C [???] Control 0xfa: +/0/65535 [???] Control 0xfb: +/1/1 [???] Control 0xfc: +/176/255 [???] Control 0xfd: +/98/65535 C [???] Control 0xff: +/0/65535 [???] filippo -- http://esaurito.net - 0x001CDE6A6B79D401 - ⠠⠵ Computation has made the tree flower. -- Alan Perlis |