From: Nicolas T. <nv...@us...> - 2009-05-26 14:34:38
|
Update of /cvsroot/contiki/contiki-2.x/platform/msb430/doc In directory ddv4jf1.ch3.sourceforge.com:/tmp/cvs-serv27830 Modified Files: msb430.txt Log Message: a bit more documentation. Index: msb430.txt =================================================================== RCS file: /cvsroot/contiki/contiki-2.x/platform/msb430/doc/msb430.txt,v retrieving revision 1.1 retrieving revision 1.2 diff -C2 -d -r1.1 -r1.2 *** msb430.txt 26 Sep 2008 18:14:12 -0000 1.1 --- msb430.txt 26 May 2009 14:34:22 -0000 1.2 *************** *** 8,17 **** The Modular Sensor Board (MSB430) was developed by FU-Berlin and was added as a platform in Contiki in the spring of 2007. In its basic form, ! this board features a Texas Instruments MSP430f1612 processor, a Chipcon CC1020 radio chip, an MMA7260Q accelerometer, and a Sensirion ! SHT11 temperature and humidity sensor. The MSB also features an SD card ! reader, which makes it suitable for storage-centric sensor networks. ! There are also extended versions of the board that are equipped with a ! GPRS-modem and a GPS-receiver. \section msb430-programming Programming the MSB430 --- 8,17 ---- The Modular Sensor Board (MSB430) was developed by FU-Berlin and was added as a platform in Contiki in the spring of 2007. In its basic form, ! this board consists of a Texas Instruments MSP430f1612 processor, a Chipcon CC1020 radio chip, an MMA7260Q accelerometer, and a Sensirion ! SHT11 temperature and humidity sensor. The MSB also has an SD device, ! which makes it suitable for storage-centric sensor networks. There are ! also extended versions of the board that are equipped with a GPRS-modem ! and a GPS-receiver. \section msb430-programming Programming the MSB430 *************** *** 26,29 **** --- 26,32 ---- <file>.u - Direct upload to a node. + Before compiling your system, you may want to look at the configuration + options in platform/msb430/configure-conf.h. + The node is typically programmed by typing *************** *** 34,37 **** --- 37,44 ---- msp430-jtag -l <parallell port identifier> -e -I <ihex file> + Platform-specific example programs are included in platform/msb430/apps + and can be compiled and uploaded from platform/msb430. A larger set of + examples for Contiki in general are in the examples/ directory. + More information about the MSB430 platform can be found at Scatterweb: http://www.scatterweb.com/content/products/MSB_en.html |