From: Johann P. <joh...@gm...> - 2011-12-16 18:04:37
|
Hi Boris, i is correct that you cant us the image with read only kernel command line (ro). There a also some other errors that come up if the image is used without the suggest speedlinux installer. But this errors don't relay matter and you can fix this quit easy. I also use a tweaked initrd in combination with speedlinux. You my use the initrd.gz from speedlinux to get red of some errors. Still the image comes up and is usable. Put the base.vdi and the swap.vdi into the install directory. Don't rename this files. Copy the following text into the files an place the two files also into the install directory. Here are my startup.bat and my settings.txt (example.conf) startup.bat: @echo off set COLINUX_CONSOLE_FONT=Lucida Console:12 set COLINUX_CONSOLE_EXIT_ON_DETACH=0 :: Enable the following line by removing the "::" if you want to use all core 2 of the CPU. set COLINUX_NO_CPU0_WORKAROUND=Y start "speedServer (coLinux)" /min colinux-daemon.exe -d -k @settings.txt pause settings.txt: exec0="colinux-console-fltk.exe" cocon=80x40x500 kernel=vmlinux root=/dev/cobd0 initrd=initrd.gz mem=512 cobd0=base.vdi cobd1=swap.vdi cofs0=C:\ eth0=slirp #eth2=ndis-bridge,"LAN1", best regards, Johann Pascher |