i was running 0.6.2pre4 without problems with winpcap giving
<network index="0" type="bridged" name="LAN-Verbindung" mac="00:ff:39:29:51:50" />
in the xml file.
With 0.6.2 i can't get it to work, neither with dhcp nor with a fixed ip-address.
What changed between pre4 and 062 ? I'm using the same config.
I get no error message, just no network connectivity.
And i'm missing the start message of the service, used to be :
Looking for interface "LAN-Verbindung"
Adapter Generic NdisWan adapter doesn't have a connection
Checking connection: LAN-Verbindung
Listening on: Intel(R) PRO/100 S Desktop Adapter...
Listening for: (ether dst 00:ff:39:29:51:50) or (ether broadcast or multicast) o
r (ip broadcast or multicast)
From: Alexander Schremmer <2004b@us...> - 2005-02-08 21:51:38
On Tue, 08 Feb 2005 17:48:08 +0100, Holger Krull wrote:
> Any hints?
Try to disable in-hardware checksum generation in the netword card driver
settings. I am not sure if that Intel chip supports it. My 3Com had those
options enabled per default and disabling them fixed this problem.
> Try to disable in-hardware checksum generation in the netword card driver
> settings. I am not sure if that Intel chip supports it. My 3Com had those
> options enabled per default and disabling them fixed this problem.
The card has that option. Disabling it doesn't change anything.
I checked with on board realtek to be sure. pre4 works, 062 doesn't.