help,colinux hang in win7 on tp x200

Anonymous
2011-07-12
2013-05-09

  • Anonymous
    2011-07-12

    hello, every one ! when i run colinux on my thinkpad x200 win7 system , i met a problem.

    problem:

    when colinux start, run to "Calibrating delay loop" , the whole win7 systme hang! can not move cursor and do any thing else.

    environment:

    hardware: thinkpad x200 , cpu: p8600@2.40GHz, 2.40GHz, memory: 2GB

    os:  win7

    coliux version: 0.7.9, 0.7.7.1

    linux image: Debian-5.0r2-lenny

    start script: debian.bat


    set COLINUX_CONSOLE_FONT=Lucida Console:12
    set COLINUX_CONSOLE_EXIT_ON_DETACH=1
    start /affinity 2 "colinux-daemon.exe -d -v 3 -t nt @debian-lenny.conf"

    conf: debian-lenny.conf
    _
    #
    # This is an example for a configuration file that can
    # be passed to colinux-daemon in this manner:
    #
    #    colinux-daemon @example.conf
    #
    # Note that you can still prepend or append configuration and
    # boot parameters before and after '@', or you can use more
    # that one '@ to load several settings one after another.
    #
    #    colinux-daemon @example.conf @overrider.conf mem=32
    #
    # Full list of config params is listed in colinux-daemon.txt.

    # The default kernel
    kernel=vmlinux

    # File contains the root file system.
    # Download and extract preconfigured file from SF "Images for 2.6".
    cobd0="F:\coLinux\linux\Debian-5.0r2-lenny.ext3.2gb"

    # Swap device, should be an empty file with 128..512MB.
    #cobd1="c:\coLinux\swap_device"

    # Tell kernel the name of root device (mostly /dev/cobd0,
    # /dev/cobd/0 on Gentoo)
    # This parameter will be forward to Linux kernel.
    root=/dev/cobd0

    # Additional kernel parameters (ro = rootfs mount read only)
    ro

    # Initrd installs modules into the root file system.
    # Need only on first boot.
    initrd=initrd.gz

    # Maximal memory for linux guest
    mem=512

    # Select console size, default is 80x25
    #cocon=120x40

    # Slirp for internet connection (outgoing)
    # Inside running coLinux configure eth0 with this static settings:
    # ipaddress 10.0.2.15   broadcast  10.0.2.255   netmask 255.255.255.0
    # gateway   10.0.2.2    nameserver 10.0.2.3
    #eth0=slirp
    #eth0=tuntap

    # Tuntap as private network between guest and host on second linux device
    #eth1=tuntap

    # Setup for serial device
    #ttys0=COM1,"BAUD=115200 PARITY=n DATA=8 STOP=1 dtr=on rts=on"

    # Run an application on colinux start (Sample Xming, a Xserver)
    #exec0=C:\Programs\Xming\Xming.exe,":0 -clipboard -multiwindow -ac"

    _

     
  • Henry N.
    Henry N.
    2011-07-12

    Please don't open two treads for same thing.
    Answer is in Help Forum