From: Podal P. J <pod...@in...> - 2007-07-06 22:01:42
|
Podal Pradeepkumar J <pod...@in...> reported this. His platform is x86_64-unknown-linux2.6.21-gnu-glibc2.6. Hi Given below are the error messages given when I run make check during installation of CLISP. I don't know what is going wrong and I m still learning LISP Please help (PROGN (SETQ S1 (OPEN "t1.plc")) (SETQ S2 (OPEN "t2.plc")) (SETQ S3 (OPEN "t3.plc")) (SETQ S4 (OPEN "t4.plc")) (SETQ S5 (OPEN "t5.plc")) (SETQ C1 (MAKE-CONCATENATED-STREAM S1 S2 S3)) (SETQ C2 (MAKE-CONCATENATED-STREAM S4 S5)) T) *** - handle_fault error2 ! address = 0x0 not in [0x333a51000,0x333e89a90) ! SIGSEGV cannot be cured. Fault address = 0x0. Permanently allocated: 150584 bytes. Currently in use: 10713296 bytes. Free space: 3700 bytes. gmake[1]: *** [tests] Segmentation fault gmake[1]: Leaving directory `/home/Pradeep/Desktop/clisp-2.41/build-with-gcc/tests' make: *** [check-tests] Error 2 **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** |
From: Sam S. <sd...@gn...> - 2007-07-09 17:28:28
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Podal Pradeepkumar J (by way of Bruno Haible <br...@cl...>) wrote: > Podal Pradeepkumar J <pod...@in...> reported this. > His platform is x86_64-unknown-linux2.6.21-gnu-glibc2.6. > > Given below are the error messages given when I run > > make check > > during installation of CLISP. I don't know what is going wrong and I m > still learning LISP > > > (PROGN (SETQ S1 (OPEN "t1.plc")) (SETQ S2 (OPEN "t2.plc")) (SETQ S3 > (OPEN "t3.plc")) (SETQ S4 (OPEN "t4.plc")) (SETQ S5 (OPEN "t5.plc")) > (SETQ C1 (MAKE-CONCATENATED-STREAM S1 S2 S3)) (SETQ C2 > (MAKE-CONCATENATED-STREAM S4 S5)) T) > > *** - handle_fault error2 ! address = 0x0 not in > [0x333a51000,0x333e89a90) ! > SIGSEGV cannot be cured. Fault address = 0x0. > Permanently allocated: 150584 bytes. > Currently in use: 10713296 bytes. > Free space: 3700 bytes. > gmake[1]: *** [tests] Segmentation fault > gmake[1]: Leaving directory > `/home/Pradeep/Desktop/clisp-2.41/build-with-gcc/tests' > make: *** [check-tests] Error 2 wfm clisp cvs head glibc-2.4-11 gcc-4.1.1-1.fc5 Linux x2.6.18-1.2257.fc5 86_64 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGknAzPp1Qsf2qnMcRAmhEAKCr5HRlz8D3nHEo7Qwi6OiB+ICxNACfQccD EqZtlIvaYU4AbaMaEFncEe0= =A3ic -----END PGP SIGNATURE----- |
From: Podal P. J. <Pod...@in...> - 2007-07-19 11:25:38
|
I did not get what is written Regards, P. Pradeepkumar =20 -----Original Message----- From: Sam Steingold [mailto:sd...@gn...]=20 Sent: Monday, July 09, 2007 10:58 PM To: Podal Pradeepkumar Jaganath Cc: cli...@li... Subject: Re: clisp-2.41 crash in testsuite (Fwd: Need some help) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Podal Pradeepkumar J (by way of Bruno Haible <br...@cl...>) wrote: > Podal Pradeepkumar J <pod...@in...> reported this. > His platform is x86_64-unknown-linux2.6.21-gnu-glibc2.6. >=20 > Given below are the error messages given when I run =20 >=20 > make check=20 >=20 > during installation of CLISP. I don't know what is going wrong and I m > still learning LISP >=20 >=20 > (PROGN (SETQ S1 (OPEN "t1.plc")) (SETQ S2 (OPEN "t2.plc")) (SETQ S3 > (OPEN "t3.plc")) (SETQ S4 (OPEN "t4.plc")) (SETQ S5 (OPEN "t5.plc")) > (SETQ C1 (MAKE-CONCATENATED-STREAM S1 S2 S3)) (SETQ C2 > (MAKE-CONCATENATED-STREAM S4 S5)) T) >=20 > *** - handle_fault error2 ! address =3D 0x0 not in > [0x333a51000,0x333e89a90) ! > SIGSEGV cannot be cured. Fault address =3D 0x0. > Permanently allocated: 150584 bytes. > Currently in use: 10713296 bytes. > Free space: 3700 bytes. > gmake[1]: *** [tests] Segmentation fault > gmake[1]: Leaving directory > `/home/Pradeep/Desktop/clisp-2.41/build-with-gcc/tests' > make: *** [check-tests] Error 2 wfm clisp cvs head glibc-2.4-11 gcc-4.1.1-1.fc5 Linux x2.6.18-1.2257.fc5 86_64 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGknAzPp1Qsf2qnMcRAmhEAKCr5HRlz8D3nHEo7Qwi6OiB+ICxNACfQccD EqZtlIvaYU4AbaMaEFncEe0=3D =3DA3ic -----END PGP SIGNATURE----- **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended= solely for the use of the addressee(s). If you are not the intended= recipient, please notify the sender by e-mail and delete the original= message. Further, you are not to copy, disclose, or distribute this e-mail= or its contents to any other person and any such actions are unlawful.= This e-mail may contain viruses. Infosys has taken every reasonable= precaution to minimize this risk, but is not liable for any damage you may= sustain as a result of any virus in this e-mail. You should carry out your= own virus checks before opening the e-mail or attachment. Infosys reserves= the right to monitor and review the content of all messages sent to or= from this e-mail address. Messages sent to or from this e-mail address may= be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** |
From: Sam S. <sd...@gn...> - 2007-07-22 02:58:35
|
> * Podal Pradeepkumar Jaganath <CbqnyCenqrrcxhzne_W@vasbflf.pbz> [2007-07-19 16:55:26 +0500]: > > I did not get what is written > > wfm > clisp cvs head > glibc-2.4-11 > gcc-4.1.1-1.fc5 > Linux x2.6.18-1.2257.fc5 86_64 wfm = works for me. I cannot reproduce the crash. you will need to build a version of clisp instrumented for debugging: ./configure --with-debug build-g cd build-g gdb lisp.run boot and send us the backtrace. it would be nice if you reported the bug using the SF bug tracker (see the FAQ list on the clisp homepage http://clisp.cons.org). thanks. -- Sam Steingold (http://sds.podval.org/) on Fedora Core release 6 (Zod) http://pmw.org.il http://israelunderattack.slide.com http://camera.org http://thereligionofpeace.com http://iris.org.il http://truepeace.org Those who beat their swords into plowshares plow for those who do not. |
From: Sam S. <sd...@gn...> - 2007-07-22 02:58:35
|
> * Podal Pradeepkumar Jaganath <CbqnyCenqrrcxhzne_W@vasbflf.pbz> [2007-07-19 16:55:26 +0500]: > > I did not get what is written > > wfm > clisp cvs head > glibc-2.4-11 > gcc-4.1.1-1.fc5 > Linux x2.6.18-1.2257.fc5 86_64 wfm = works for me. I cannot reproduce the crash. you will need to build a version of clisp instrumented for debugging: ./configure --with-debug build-g cd build-g gdb lisp.run boot and send us the backtrace. it would be nice if you reported the bug using the SF bug tracker (see the FAQ list on the clisp homepage http://clisp.cons.org). thanks. -- Sam Steingold (http://sds.podval.org/) on Fedora Core release 6 (Zod) http://pmw.org.il http://israelunderattack.slide.com http://camera.org http://thereligionofpeace.com http://iris.org.il http://truepeace.org Those who beat their swords into plowshares plow for those who do not. |