Another good thing could be DVD-RAM support. I do not know, if this works currently [nothing works on my x64 edition, so I cannot try]. DVD-RAM usually uses a separate driver, so supporting DVD-RAM in BwgBurn should not be magic work??
Thanks a lot and
best regards,
Manfred
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Can you send me the log file from using the Drive Explorer on a 64 bit machine. As to DVD-RAM support, I don't have a DVD-RAM drive and really cannot find one. I will take a look at the local Fry's again to see if I can find a DVD-RAM drive.
Thanks
Sjcbulldog
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
04.02.2007 21:18:23 Info Drive Explorer 0.7.0
04.02.2007 21:18:45 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:18:45 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - The parameter is incorrect.
04.02.2007 21:19:02 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:19:02 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - The parameter is incorrect.
04.02.2007 21:19:13 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:19:13 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - Indicates two revision levels are incompatible.
This is for my three DVD drives, one of them the DVD-RAM. The latter is a multi-purpose-drive from LG [Windows Device Manager: HL-DT-ST DVDRAM GSA-4120B]. The newer Models are named like GSA-H10N etc. They are cheap and good and include DVD-RAM support [but unfortunately no drivers :-( ].
BTW, is there any way to configure the logging level? The output about looks a bit plain ????!
Thanks and best regards,
Manfred
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I found that my Blu-Ray drive from Sony supports DVD-RAM media. No other drive that I own supports DVD-RAM, so I bought some DVD-RAM media and will have support for this in the BwgBurn-0.7.0 RC2. I thought it was OK to add this as it is very well isolated from the rest of the system. Only a burner class was required to support this. No changes to the bwgburn core applications was required.
Thanks
Sjcbulldog
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Ok, I released 0.7.0 RC2 that has support for DVD-RAM. The media I had came preformatted, so I have not added support to the erase/format utility. That will come in 0.7.1, but if you have formatted media, you can write data to the disk.
Thanks
Sjcbulldog
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi All !
Another good thing could be DVD-RAM support. I do not know, if this works currently [nothing works on my x64 edition, so I cannot try]. DVD-RAM usually uses a separate driver, so supporting DVD-RAM in BwgBurn should not be magic work??
Thanks a lot and
best regards,
Manfred
Can you send me the log file from using the Drive Explorer on a 64 bit machine. As to DVD-RAM support, I don't have a DVD-RAM drive and really cannot find one. I will take a look at the local Fry's again to see if I can find a DVD-RAM drive.
Thanks
Sjcbulldog
Hi !
Yes:
04.02.2007 21:18:23 Info Drive Explorer 0.7.0
04.02.2007 21:18:45 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:18:45 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - The parameter is incorrect.
04.02.2007 21:19:02 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:19:02 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - The parameter is incorrect.
04.02.2007 21:19:13 Debug-8 Bwg.Scsi.Device.Inquiry(out result)
04.02.2007 21:19:13 Error IOCTL_SCSI_PASS_THROUGH_DIRECT failed - Indicates two revision levels are incompatible.
This is for my three DVD drives, one of them the DVD-RAM. The latter is a multi-purpose-drive from LG [Windows Device Manager: HL-DT-ST DVDRAM GSA-4120B]. The newer Models are named like GSA-H10N etc. They are cheap and good and include DVD-RAM support [but unfortunately no drivers :-( ].
BTW, is there any way to configure the logging level? The output about looks a bit plain ????!
Thanks and best regards,
Manfred
I found that my Blu-Ray drive from Sony supports DVD-RAM media. No other drive that I own supports DVD-RAM, so I bought some DVD-RAM media and will have support for this in the BwgBurn-0.7.0 RC2. I thought it was OK to add this as it is very well isolated from the rest of the system. Only a burner class was required to support this. No changes to the bwgburn core applications was required.
Thanks
Sjcbulldog
Ok, I released 0.7.0 RC2 that has support for DVD-RAM. The media I had came preformatted, so I have not added support to the erase/format utility. That will come in 0.7.1, but if you have formatted media, you can write data to the disk.
Thanks
Sjcbulldog