Thread: [brlcad-commits] SF.net SVN: brlcad:[34582] brlcad/trunk/INSTALL
Open Source Solid Modeling CAD
Brought to you by:
brlcad
From: <br...@us...> - 2009-05-25 03:20:37
|
Revision: 34582 http://brlcad.svn.sourceforge.net/brlcad/?rev=34582&view=rev Author: brlcad Date: 2009-05-25 03:20:32 +0000 (Mon, 25 May 2009) Log Message: ----------- minor typo Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2009-05-23 01:12:04 UTC (rev 34581) +++ brlcad/trunk/INSTALL 2009-05-25 03:20:32 UTC (rev 34582) @@ -301,7 +301,7 @@ provide a significant (10%-30%) performance boost at the expense of extensive error checking (that in turn help prevent corruption of your data). Default is "yes", and should only be disabled for read-only -render work where performance is critical. Alises: +render work where performance is critical. Aliases: --enable-run-time-debug --enable-runtime-debugging --enable-run-time-debugging This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <br...@us...> - 2009-07-28 14:46:46
|
Revision: 35337 http://brlcad.svn.sourceforge.net/brlcad/?rev=35337&view=rev Author: brlcad Date: 2009-07-28 14:46:34 +0000 (Tue, 28 Jul 2009) Log Message: ----------- give a big 'find' command one-liner that should fully set up a /usr/brlcad rooted installation with proper developer access permissions. Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2009-07-28 14:20:27 UTC (rev 35336) +++ brlcad/trunk/INSTALL 2009-07-28 14:46:34 UTC (rev 35337) @@ -638,6 +638,19 @@ command that is already preconfigured to locate the BRL-CAD manpages. +Configuring permissions uniformly with group read/write access: + +find /usr/brlcad -type d -exec chmod ug+rwx {} \; -exec chmod o+rx {} \; -o -type f -exec chmod ug+rw {} \; -exec chmod o+r {} \; + +The above 'find' line will set up permissions across a /usr/brlcad +rooted installation such that 'user' and 'group' will have read-write +access and 'other' will have read access consistently across all +files. This is a common configuration used by BRL-CAD developers that +allows shared management of installations amongst developers while +having all users maintain read-only access. + + + TESTING FUNCTIONALITY --------------------- This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <br...@us...> - 2010-02-12 20:46:12
|
Revision: 37617 http://brlcad.svn.sourceforge.net/brlcad/?rev=37617&view=rev Author: brlcad Date: 2010-02-12 20:46:05 +0000 (Fri, 12 Feb 2010) Log Message: ----------- document the new --disable/enable-strict flag. Modified Paths: -------------- brlcad/trunk/INSTALL Property Changed: ---------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2010-02-12 20:45:37 UTC (rev 37616) +++ brlcad/trunk/INSTALL 2010-02-12 20:46:05 UTC (rev 37617) @@ -306,6 +306,16 @@ --enable-runtime-debugging --enable-run-time-debugging +--enable-strict-build causes all compilation warnings to be treated as +errors for certain portions of code that has undergone a more thorough +review. This behavior of this flag is heavily influenced by +compilation settings (such as --enable-warnings) including +optimization flags (such as --enable-optimized). Default is "yes". +Aliases: + --enable-strict + --enable-strict-compile + --enable-strict-compile-flags + --enable-64bit-build attempts to force compilation to produce 64-bit binaries and libraries. Note that it merely *ATTEMPTS* to force 64-bit compilation but in all practicality and likelihood, you will @@ -481,8 +491,11 @@ --enable-geometry-build --enable-geometry-install ---enable-optimized turns on optimized compilation. Default is "no". -Aliases: +--enable-optimized turns on optimized compilation. Note that +optimized compilation may potentially change the warnings produced by +the compiler. You may also need to specify --disable-strict or +--disable-warnings to avoid halting on compilation warnings. Default +is "no". Aliases: --enable-opt --enable-optimize --enable-optimization Property changes on: brlcad/trunk/INSTALL ___________________________________________________________________ Added: svn:executable + * This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <br...@us...> - 2010-10-29 19:19:02
|
Revision: 41187 http://brlcad.svn.sourceforge.net/brlcad/?rev=41187&view=rev Author: brlcad Date: 2010-10-29 19:18:55 +0000 (Fri, 29 Oct 2010) Log Message: ----------- for some reason, README.Windows was not listed Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2010-10-29 18:54:29 UTC (rev 41186) +++ brlcad/trunk/INSTALL 2010-10-29 19:18:55 UTC (rev 41187) @@ -15,6 +15,7 @@ doc/README.MacOSX -- Apple Mac OS X doc/README.IRIX -- SGI IRIX and IRIX64 doc/README.Linux -- Various Linux distributions + doc/README.Windows -- Microsoft Windows TABLE OF CONTENTS This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2011-01-15 13:04:12
|
Revision: 42302 http://brlcad.svn.sourceforge.net/brlcad/?rev=42302&view=rev Author: tbrowder2 Date: 2011-01-15 13:04:06 +0000 (Sat, 15 Jan 2011) Log Message: ----------- correct typo; grammar Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-01-15 13:01:59 UTC (rev 42301) +++ brlcad/trunk/INSTALL 2011-01-15 13:04:06 UTC (rev 42302) @@ -90,7 +90,7 @@ For the unspecialized binary distributions that are basically compressed tarballs of the installation root, they should contain the entire hierarchy of the distribution. That is to say that they -contain /usr/brlcad in it's entirety so that if you decompress, you +contain /usr/brlcad in its entirety so that if you decompress, you will have a `usr' directory that contains a single `brlcad' directory: gunzip brlcad-7.2.4_linux_ia64.tar.gz @@ -123,13 +123,13 @@ INSTALLING FROM SOURCE ---------------------- -There are a couple means to obtain the BRL-CAD sources, usually via +There are a couple of ways to obtain the BRL-CAD sources, usually via one of the following starting points: 1) from a SVN checkout/export, or 2) from a source distribution tarball -Using the latest SVN sources is recommended where possible, since it +Using the latest SVN sources is recommended where possible since it will have the latest changes. See the corresponding section below for details on how to install from either starting point. This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2011-02-02 03:53:10
|
Revision: 42881 http://brlcad.svn.sourceforge.net/brlcad/?rev=42881&view=rev Author: tbrowder2 Date: 2011-02-02 03:53:03 +0000 (Wed, 02 Feb 2011) Log Message: ----------- added information about where file check sums are to be found Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-02-02 03:47:47 UTC (rev 42880) +++ brlcad/trunk/INSTALL 2011-02-02 03:53:03 UTC (rev 42881) @@ -36,6 +36,14 @@ QUICK INSTALLATION ------------------ +Note that the downloaded files have two check sums calculated +automatically by the Source Forge file release system. The values are +used to verify the integrity of the files as distributed. Get those +data by clicking on the 'i' button at the end of each file's name. +You should ensure those data are retained and kept with the files if +you re-distribute them. + + If you downloaded a binary distribution of BRL-CAD for your system, please read the INSTALLING FROM BINARY section of this document down below. The rest of this quick installation section is only relevant This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2011-02-02 16:43:44
|
Revision: 42901 http://brlcad.svn.sourceforge.net/brlcad/?rev=42901&view=rev Author: starseeker Date: 2011-02-02 16:43:38 +0000 (Wed, 02 Feb 2011) Log Message: ----------- blt is no more Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-02-02 16:42:06 UTC (rev 42900) +++ brlcad/trunk/INSTALL 2011-02-02 16:43:38 UTC (rev 42901) @@ -434,14 +434,6 @@ --enable-iwidgets --enable-iwidgets-build ---enable-blt-build turns on compilation of the Blt library that is -provided in a BRL-CAD source distribution. Default is "auto", meaning -that libblt will be compiled and installed only if a suitable system -Blt library is not found. Aliases: - --enable-blt - --enable-libblt - --enable-libblt-build - --enable-tkhtml3-build turns on compilation of the tkhtml3 library that is provided in a BRL-CAD source distribution. Default is "yes". Aliases: This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2011-02-02 16:47:52
|
Revision: 42905 http://brlcad.svn.sourceforge.net/brlcad/?rev=42905&view=rev Author: starseeker Date: 2011-02-02 16:47:45 +0000 (Wed, 02 Feb 2011) Log Message: ----------- tkimg -> tkpng Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-02-02 16:46:50 UTC (rev 42904) +++ brlcad/trunk/INSTALL 2011-02-02 16:47:45 UTC (rev 42905) @@ -438,15 +438,14 @@ provided in a BRL-CAD source distribution. Default is "yes". Aliases: --enable-tkhtml - --enable-tkhtml3 ---enable-tkimg-build turns on compilation of the tkimg library that is +--enable-tkpng-build turns on compilation of the tkpng library that is provided in a BRL-CAD source distribution. Default is "auto", meaning -that libtkimg will be compiled and installed only if a suitable system -tkimg library is not found. Aliases: - --enable-tkimg - --enable-libtkimg - --enable-libtkimg-build +that libtkpng will be compiled and installed only if a suitable system +tkpng library is not found. Aliases: + --enable-tkpng + --enable-libtkpng + --enable-libtkpng-build --enable-tnt-install turns on installation of the Template Numerical Toolkit that is provided in a BRL-CAD source distribution. Default is This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2011-02-02 17:20:00
|
Revision: 42911 http://brlcad.svn.sourceforge.net/brlcad/?rev=42911&view=rev Author: starseeker Date: 2011-02-02 17:19:53 +0000 (Wed, 02 Feb 2011) Log Message: ----------- remainder of INSTALL documentation options - repository-regress should now succeed. Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-02-02 17:17:29 UTC (rev 42910) +++ brlcad/trunk/INSTALL 2011-02-02 17:19:53 UTC (rev 42911) @@ -385,6 +385,15 @@ --enable-open-nurbs --enable-open-nurbs-build +--enable-step-build turns on compilation of the NIST Step Class +Libraries that are provided in a BRL-CAD source distribution. Default +is "auto", meaning that step will be compiled and installed only if a +suitable system NIST SCL libraries are not found. Aliases: + --enable-step + --enable-steplibs + --enable-libstep + --enable-libstep-build + --enable-termlib-build turns on compilation of the termlib library that is provided in a BRL-CAD source distribution. Default is "auto", meaning that libtermlib will be compiled and installed only if a @@ -413,6 +422,15 @@ --enable-libtk --enable-libtk-build +--enable-aquatk-build turns on compilation of the Aqua Tk options for +the Tk library on Mac OSX. Default is "off". Aliases: + --enable-aquatk + --enable-aqua-tk + --enable-aqua-tk-build + --enable-tkaqua + --enable-tkaqua-build + --enable-tk-aqua-build + --enable-itcl-build turns on compilation of the Incr Tcl/Tk library that is provided in a BRL-CAD source distribution. Default is "auto", meaning that libitcl and libitk will be compiled and installed only if @@ -482,7 +500,7 @@ --enable-endgame-framework --enable-endgame-framework-build ---enable-ug-build turns on compilation of the Unigraphics (NX) +--enable-unigraphics-build turns on compilation of the Unigraphics (NX) importer used to provide conversion support from Unigraphics format to a tessellated BRL-CAD geometry format. Default is "no". Aliases: --enable-unigraphics @@ -499,6 +517,13 @@ --enable-geometry-build --enable-geometry-install +--enable-documentation turns on documentation requiring Docbook based +compilation. Default is "auto", meaning it will build the documentation +if suitable tools to do so are found. Aliases: + --enable-documentation-install + --enable-docs + --enable-docs-install + --enable-optimized turns on optimized compilation. Note that optimized compilation may potentially change the warnings produced by the compiler. You may also need to specify --disable-strict or This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <br...@us...> - 2011-02-02 18:10:31
|
Revision: 42916 http://brlcad.svn.sourceforge.net/brlcad/?rev=42916&view=rev Author: brlcad Date: 2011-02-02 18:10:25 +0000 (Wed, 02 Feb 2011) Log Message: ----------- document rtgl and expand the explanation of configuration options to detail what is different between the enable and with options. reword a little for clarity too. Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-02-02 18:04:28 UTC (rev 42915) +++ brlcad/trunk/INSTALL 2011-02-02 18:10:25 UTC (rev 42916) @@ -241,27 +241,37 @@ CONFIGURATION OPTIONS --------------------- -Variables can be set in the environment passed to `configure'. -However, the build may run configure again during the build, and the -customized values of these variables may be lost. In order to avoid -this problem, you should set them in the `configure' command line, -using `VAR=value'. For example: +The `configure' build script is used to set compilation options and +supports a wide selection of compilation directives. See the ENABLE +OPTIONS and WITH OPTIONS lists below for the arguments presently +available to configure in more descriptive detail. The brief summary +is that "enable" options focus INWARD and "with" options focus +OUTWARD. There are various --enable-* flags that toggle how BRL-CAD +code is compiled. There are various --with-* flags that toggle what +system services are used and how to find them. +In order to avoid compilation problems, you should set all compilation +options on the `configure' command line, using `VAR=value'. For +example: + ./configure CC=/usr/ucb/bin/cc will cause the specified executable program to be used as the C -compiler. +compiler. The most common configuration tested is a default +debuggable build intended for installation into /usr/brlcad with no +external dependencies assumed: + ./configure --enable-all --disable-strict + By default, BRL-CAD is configured to build the entire package and will install completely isolated into the /usr/brlcad directory. Configuration will prepare the build for an unoptimized compilation by default and will attempt to utilize required system libraries if they are available, otherwise compiling the required library dependencies as needed. Run `./configure --help' for a list of all of the possible -configuration options. See the ENABLE OPTIONS and WITH OPTIONS lists -below for the arguments presently available to configure in more -descriptive detail. +configuration options. + ENABLE OPTIONS: The below --enable-* options can be used to enable or disable aspects @@ -579,6 +589,12 @@ --enable-build-progress --enable-progress-build +--enable-rtgl turns on compilation of an experimental Ray Trace OpenGL +display manager, providing shaded displays within MGED. Default is +"no". Aliases: + None + + WITH OPTIONS: The below --with-* options enable/disable/locate OPTIONAL SYSTEM This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2011-12-16 06:12:46
|
Revision: 48017 http://brlcad.svn.sourceforge.net/brlcad/?rev=48017&view=rev Author: starseeker Date: 2011-12-16 06:12:39 +0000 (Fri, 16 Dec 2011) Log Message: ----------- Doing Tk as a Tcl extension, so docs are generated for it - add 'em. Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-12-16 06:11:56 UTC (rev 48016) +++ brlcad/trunk/INSTALL 2011-12-16 06:12:39 UTC (rev 48017) @@ -478,6 +478,22 @@ Aliases: ENABLE_TCL +--- BRLCAD_TK --- + +Option for enabling and disabling compilation of the Tk library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the BRLCAD_TCL option and testing first for +a system version if BRLCAD_BUNDLED_LIBS is also AUTO. +Option for enabling and disabling compilation of the Tk graphics package for +Tcl provided with BRL-CAD's source distribution. Default is AUTO, +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is +set to BUNDLED, local copy is built even if a system version is present. +This option also depends on BRLCAD_ENABLE_TK being ON. + +Aliases: ENABLE_TK + + --- BRLCAD_ITCL --- Option for enabling and disabling compilation of the IncrTcl package for This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2011-12-19 23:34:36
|
Revision: 48060 http://brlcad.svn.sourceforge.net/brlcad/?rev=48060&view=rev Author: starseeker Date: 2011-12-19 23:34:29 +0000 (Mon, 19 Dec 2011) Log Message: ----------- Add tweak to documentation string. Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-12-19 23:27:37 UTC (rev 48059) +++ brlcad/trunk/INSTALL 2011-12-19 23:34:29 UTC (rev 48060) @@ -421,7 +421,7 @@ transformation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation processing. Default is AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if -BRLCAD_BUNDLED_LIBS is also AUTO. +BRLCAD_BUNDLED_LIBS is also AUTO. Depends on BRLCAD_EXTRADOCS. Aliases: ENABLE_XSLTPROC This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2011-12-22 13:53:10
|
Revision: 48128 http://brlcad.svn.sourceforge.net/brlcad/?rev=48128&view=rev Author: tbrowder2 Date: 2011-12-22 13:52:59 +0000 (Thu, 22 Dec 2011) Log Message: ----------- correct typo Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2011-12-22 13:52:23 UTC (rev 48127) +++ brlcad/trunk/INSTALL 2011-12-22 13:52:59 UTC (rev 48128) @@ -101,7 +101,7 @@ For the unspecialized binary distributions that are basically compressed tarballs of the installation root, they should contain the entire hierarchy of the distribution. To put that hierarchy in its -"installed" location, you just create the dirctory and move the +"installed" location, you just create the directory and move the expanded tarball contents: gunzip BRL-CAD_7.2.4_Linux_ia64.tar.gz @@ -115,7 +115,7 @@ but this is not guaranteed. It's recommended that you start from a source distribution if you would like to install into an alternate installation location. That said, if you do desire to install and/or run BRL-CAD from -a different location, give it a try... on some platforms it will work. +a different location, give it a try...on some platforms it will work. Something to be aware of - even if a binary distribution IS relocatable, it will use its local copies of things like libraries only so long as the This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2012-02-26 18:27:33
|
Revision: 49548 http://brlcad.svn.sourceforge.net/brlcad/?rev=49548&view=rev Author: tbrowder2 Date: 2012-02-26 18:27:27 +0000 (Sun, 26 Feb 2012) Log Message: ----------- add a tad more specificity since PDF is not mentioned in any of the option names Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-02-26 17:10:25 UTC (rev 49547) +++ brlcad/trunk/INSTALL 2012-02-26 18:27:27 UTC (rev 49548) @@ -356,7 +356,8 @@ The core option that enables and disables bulding of BRL-CAD's DocBook based documentation (includes manuals and man pages for commands, among other things.) Defaults to ON, but only HTML and MAN formats are enabled -by default - PDF must be enabled separately. +by default - PDF must be enabled separately by use of this option or one +of its aliases. Aliases: ENABLE_DOCS, ENABLE_EXTRA_DOCS, ENABLE_DOCBOOK This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2012-02-26 21:51:38
|
Revision: 49552 http://brlcad.svn.sourceforge.net/brlcad/?rev=49552&view=rev Author: tbrowder2 Date: 2012-02-26 21:51:30 +0000 (Sun, 26 Feb 2012) Log Message: ----------- document the APACHE_FOP environment variable used by the cmake build system Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-02-26 21:47:43 UTC (rev 49551) +++ brlcad/trunk/INSTALL 2012-02-26 21:51:30 UTC (rev 49552) @@ -357,7 +357,9 @@ based documentation (includes manuals and man pages for commands, among other things.) Defaults to ON, but only HTML and MAN formats are enabled by default - PDF must be enabled separately by use of this option or one -of its aliases. +of its aliases. Note that you may set environment variable APACHE_FOP +to point to your locally installed "fop executable file (which on Linux is +usually a shell script with 0755 permissions). Aliases: ENABLE_DOCS, ENABLE_EXTRA_DOCS, ENABLE_DOCBOOK This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2012-03-08 13:57:57
|
Revision: 49661 http://brlcad.svn.sourceforge.net/brlcad/?rev=49661&view=rev Author: tbrowder2 Date: 2012-03-08 13:57:47 +0000 (Thu, 08 Mar 2012) Log Message: ----------- tad bit better grammar Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-03-08 13:56:56 UTC (rev 49660) +++ brlcad/trunk/INSTALL 2012-03-08 13:57:47 UTC (rev 49661) @@ -117,7 +117,7 @@ location. That said, if you do desire to install and/or run BRL-CAD from a different location, give it a try...on some platforms it will work. -Something to be aware of - even if a binary distribution IS relocatable, +Something to be aware of, even if a binary distribution IS relocatable: it will use its local copies of things like libraries only so long as the "final" installed target directory that the build was compiled for does not contain a BRL-CAD installation. Due to the way path logic @@ -150,7 +150,7 @@ Starting From a SVN Checkout/Export: With CMake, there is no longer any difference between building from -a subversion checkout and a tarball - follow the Source Distribution +a subversion checkout and a tarball--follow the Source Distribution instructions below. Starting From a Source Distribution: @@ -165,7 +165,7 @@ directory. The CMAKE_INSTALL_PREFIX option may be used to change that directory, or a Release build type may be specified to install to /usr/brlcad/rel-X.Y.Z - more on this below. The -tradition of non-system installation paths goes back a couple decades +tradition of non-system installation paths goes back a couple of decades and is a convenient means to isolate the BRL-CAD solid modeling system from your system, resolves conflicts, facilitates uninstalls, and simplifies upgrades. The default configuration is performed by This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <tbr...@us...> - 2012-03-08 16:30:49
|
Revision: 49664 http://brlcad.svn.sourceforge.net/brlcad/?rev=49664&view=rev Author: tbrowder2 Date: 2012-03-08 16:30:38 +0000 (Thu, 08 Mar 2012) Log Message: ----------- tell users how to defined a user-build-preference file Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-03-08 16:15:20 UTC (rev 49663) +++ brlcad/trunk/INSTALL 2012-03-08 16:30:38 UTC (rev 49664) @@ -247,6 +247,23 @@ See the CONFIGURATION OPTIONS below for more details on all of the possible settings. +You can specify options or preferences you want to always use by +default. For example, to always enable all local libs the following +line can be added to your own configuration file: + + set(BRLCAD_BUNDLED_LIBS "Bundled" CACHE STRING "Enable all local libs") + +You can define your own configuration file in one of three ways. The +build system will search for the file in this order: + + ${BRLCAD_SOURCE_DIR}/../BRL-CAD_CONFIG.GLOBAL + + ${BRLCAD_SOURCE_DIR}/BRL-CAD_CONFIG.GLOBAL + + the file defined in the environment variable "BRLCAD_USER_GLOBAL_CONFIG_FILE" + +The build system will use the first file defined that exists. + Once configured, you should be able to succesfully build BRL-CAD via make: This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2012-06-19 12:34:16
|
Revision: 51232 http://brlcad.svn.sourceforge.net/brlcad/?rev=51232&view=rev Author: starseeker Date: 2012-06-19 12:34:10 +0000 (Tue, 19 Jun 2012) Log Message: ----------- Sync minor install file changes Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-06-19 12:32:21 UTC (rev 51231) +++ brlcad/trunk/INSTALL 2012-06-19 12:34:10 UTC (rev 51232) @@ -350,10 +350,10 @@ --- BRLCAD_BUNDLED_LIBS --- Enables compilation of all 3rd party sources that are provided within a BRL-CAD -source distribution. If used this option sets all other 3rd party library -build flags to ON by default. However, that setting can be overridden by -manually setting individual variables. Default is "AUTO" - 3rd party sources -are compiled only if they are not detected as being available and functioning +source distribution. If used this option sets all other 3rd party library +build flags to ON by default. However, that setting can be overridden by +manually setting individual variables. Default is "AUTO" - 3rd party sources +are compiled only if they are not detected as being available and functioning as expected. Aliases: ENABLE_ALL @@ -362,7 +362,7 @@ --- BRLCAD_ENABLE_OPENGL --- Enable support for OpenGL based Display Managers in BRL-CAD. -Default depends on whether OpenGL is successfully detected - +Default depends on whether OpenGL is successfully detected - if it is, default is to enable. Aliases: ENABLE_OPENGL @@ -383,11 +383,11 @@ --- BRLCAD_ENABLE_RUNTIME_DEBUG --- -Enables support for application and library debugging facilities. -Disabling the run-time debugging facilities can provide a significant -(10%-30%) performance boost at the expense of extensive error -checking (that in turn help prevent corruption of your data). -Default is ;ON;, and should only be disabled for read-only render +Enables support for application and library debugging facilities. +Disabling the run-time debugging facilities can provide a significant +(10%-30%) performance boost at the expense of extensive error +checking (that in turn help prevent corruption of your data). +Default is ;ON;, and should only be disabled for read-only render work where performance is critical. Aliases: ENABLE_RUNTIME_DEBUG, ENABLE_RUN_TIME_DEBUG, ENABLE_RUNTIME_DEBUGGING @@ -656,5 +656,5 @@ lists in this file - those entries are auto-generated from information in the toplevel CMakeLists.txt file and src/other/CMakeLists.txt - any changes should be made in those files. The CMake configuration process will - automatically re-generate INSTALL with the new descriptions and alias + automatically re-generate INSTALL with the new descriptions and alias information. \ No newline at end of file This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2012-06-22 16:56:07
|
Revision: 51286 http://brlcad.svn.sourceforge.net/brlcad/?rev=51286&view=rev Author: starseeker Date: 2012-06-22 16:56:00 +0000 (Fri, 22 Jun 2012) Log Message: ----------- This option name has changed Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-06-22 16:34:54 UTC (rev 51285) +++ brlcad/trunk/INSTALL 2012-06-22 16:56:00 UTC (rev 51286) @@ -240,9 +240,9 @@ -DBRLCAD_ENABLE_OPENGL=OFF To obtain an optimized build (for example, for BRL-CAD Benchmark -performance evaluation), enable BRLCAD_ENABLE_OPTIMIZED_BUILD: +performance evaluation), enable BRLCAD_FLAGS_OPTIMIZATION: - -DBRLCAD_ENABLE_OPTIMIZED_BUILD=ON + -DBRLCAD_FLAGS_OPTIMIZATION=ON See the CONFIGURATION OPTIONS below for more details on all of the possible settings. @@ -657,4 +657,4 @@ the toplevel CMakeLists.txt file and src/other/CMakeLists.txt - any changes should be made in those files. The CMake configuration process will automatically re-generate INSTALL with the new descriptions and alias - information. \ No newline at end of file + information. This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <car...@us...> - 2012-08-07 20:07:14
|
Revision: 51790 http://brlcad.svn.sourceforge.net/brlcad/?rev=51790&view=rev Author: carlmoore Date: 2012-08-07 20:07:08 +0000 (Tue, 07 Aug 2012) Log Message: ----------- remove trailing blanks and fix spellings Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-08-07 20:05:08 UTC (rev 51789) +++ brlcad/trunk/INSTALL 2012-08-07 20:07:08 UTC (rev 51790) @@ -20,7 +20,7 @@ doc/README.Solaris -- Oracle Solaris, OpenIndiana (Illumos), etc. doc/README.Windows -- Microsoft Windows doc/README.VAX -- Virtual Address eXtension architecture from DEC. - One of the original BRL-CAD platforms. These + One of the original BRL-CAD platforms. These days, re-created using the simh simulator. @@ -53,7 +53,7 @@ below. The rest of this quick installation section is only relevant to source code distributions of BRL-CAD. -For the impatient or simplistic, the following steps should compile, +For the impatient or simplistic, the following steps should compile, test, and install an optimized BRL-CAD quickly into the /usr/brlcad/rel-X.Y.Z directory if CMake is installed on your system: @@ -90,8 +90,8 @@ ---------------------- There are a variety of different kinds of binary distributions of -BRL-CAD. Some of the binary disributions are sufficiently generic and -are simply a binary commpressed tarball distribution. Others are +BRL-CAD. Some of the binary distributions are sufficiently generic and +are simply a binary compressed tarball distribution. Others are specific to a particular platform such as Debian, Mac OS X, FreeBSD, and Windows etc. @@ -111,13 +111,13 @@ Of course, there are other compression options possible including zip and bzip2. By default, BRL-CAD expects to be installed into -/usr/brlcad/rel-7.2.4. On some platforms the binary may be relocatable, -but this is not guaranteed. It's recommended that you start from a source +/usr/brlcad/rel-7.2.4. On some platforms the binary may be relocatable, +but this is not guaranteed. It's recommended that you start from a source distribution if you would like to install into an alternate installation -location. That said, if you do desire to install and/or run BRL-CAD from +location. That said, if you do desire to install and/or run BRL-CAD from a different location, give it a try...on some platforms it will work. -Something to be aware of, even if a binary distribution IS relocatable: +Something to be aware of, even if a binary distribution IS relocatable: it will use its local copies of things like libraries only so long as the "final" installed target directory that the build was compiled for does not contain a BRL-CAD installation. Due to the way path logic @@ -161,19 +161,19 @@ to go about selecting which options are appropriate for you. By default, the default configuration will prepare the build system -to perform a Debug build and install into the /usr/brlcad/dev-X.Y.Z -directory. The CMAKE_INSTALL_PREFIX option may be used to change -that directory, or a Release build type may be specified to install to +to perform a Debug build and install into the /usr/brlcad/dev-X.Y.Z +directory. The CMAKE_INSTALL_PREFIX option may be used to change +that directory, or a Release build type may be specified to install to /usr/brlcad/rel-X.Y.Z - more on this below. The tradition of non-system installation paths goes back a couple of decades -and is a convenient means to isolate the BRL-CAD solid modeling -system from your system, resolves conflicts, facilitates uninstalls, -and simplifies upgrades. The default configuration is performed by -running `cmake'. It is not required to do the build in a directory -different from your source directory, but it is much cleaner and -*highly* recommended - this guide will illustrate the build process -with the assumption that the BRL-CAD source code is in the directory -brlcad-7.2.4 and the directory intended to hold the build output is +and is a convenient means to isolate the BRL-CAD solid modeling +system from your system, resolves conflicts, facilitates uninstalls, +and simplifies upgrades. The default configuration is performed by +running `cmake'. It is not required to do the build in a directory +different from your source directory, but it is much cleaner and +*highly* recommended - this guide will illustrate the build process +with the assumption that the BRL-CAD source code is in the directory +brlcad-7.2.4 and the directory intended to hold the build output is brlcad-build, located in the same parent directory as brlcad-7.2.4: . @@ -192,8 +192,8 @@ * Debug (-DCMAKE_BUILD_TYPE=Debug) - Debug is the configuration that most developers will want to use when working on BRL-CAD. It will add debug flags to the compile, and sets the default install directory to - be /usr/brlcad/dev-X.Y.Z - in order to run the resulting installed - binaries, the developer should ensure that the dev-X.Y.Z path is + be /usr/brlcad/dev-X.Y.Z - in order to run the resulting installed + binaries, the developer should ensure that the dev-X.Y.Z path is first in their PATH environment variable. * Release (-DCMAKE_BUILD_TYPE=Release) - A release build is intended for @@ -213,12 +213,12 @@ jove. However, BRL-CAD does require and include several 3rd party components. If your system does not include a sufficient version of those required 3rd party components, they will be automatically -configured for compilation. +configured for compilation. If the autodetection mechanisms fail to produce a working configuration, the next simplest approach is typically to enable ALL the third party components - this is typically a well tested configuration, but will -increase both the build time and final install size of BRL-CAD on +increase both the build time and final install size of BRL-CAD on the system. To set this variable on the command line, use -D to define BRLCAD_BUNDLED_LIBS for CMake: @@ -226,15 +226,15 @@ If the graphical interface (cmake-gui) is in use, it will list this and other common options by default, allowing the user change them -graphically. This is often quicker and more convenient than +graphically. This is often quicker and more convenient than defining options on the command line, but both will work. -You can also force on or off any individual 3rd party library by +You can also force on or off any individual 3rd party library by setting the BRL-CAD variable for that feature to either on or off: -DBRLCAD_<LIBRARY>=ON -Other variables control BRL-CAD features. For example, to NOT +Other variables control BRL-CAD features. For example, to NOT enable functionality using OpenGL, set -DBRLCAD_ENABLE_OPENGL=OFF @@ -264,10 +264,10 @@ The build system will use the first file defined that exists. -Once configured, you should be able to succesfully build BRL-CAD via +Once configured, you should be able to successfully build BRL-CAD via make: - make + make (On multicore systems, adding the -j flag (e.g. -j6) is recommended) @@ -290,8 +290,8 @@ --------------------- To test BRL-CAD before installation, you can run the BRL-CAD benchmark. -The benchmark will report if the results are correct, testing a -majority of the core functionality of BRL-CAD in addition to testing +The benchmark will report if the results are correct, testing a +majority of the core functionality of BRL-CAD in addition to testing your system's performance: make benchmark @@ -422,7 +422,7 @@ Option for enabling and disabling compilation of the Regular Expression Library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_REGEX @@ -432,7 +432,7 @@ Option for enabling and disabling compilation of the zlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to -the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_ZLIB, ENABLE_LIBZ @@ -442,7 +442,7 @@ Option for enabling and disabling compilation of the lemon parser provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_LEMON @@ -452,7 +452,7 @@ Option for enabling and disabling compilation of the re2c scanner utility provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_RE2C @@ -462,7 +462,7 @@ Option for enabling and disabling compilation of the perplex scanner generator provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. perplex requires a working re2c. Aliases: ENABLE_PERPLEX @@ -471,9 +471,9 @@ --- BRLCAD_XSLTPROC --- Option for enabling and disabling compilation of the xsltproc XML -transformation utilty provided with BRL-CAD's source distribution. Used +transformation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation processing. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Depends on BRLCAD_EXTRADOCS. Aliases: ENABLE_XSLTPROC @@ -482,9 +482,9 @@ --- BRLCAD_XMLLINT --- Option for enabling and disabling compilation of the xmllint XML -validation utilty provided with BRL-CAD's source distribution. Used +validation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation validation. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_XMLLINT @@ -494,7 +494,7 @@ Option for enabling and disabling compilation of the termlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. (Except when building with Visual Studio, where it is disabled. Windows does not support the termlib API.) @@ -505,7 +505,7 @@ Option for enabling and disabling compilation of the Portable Network Graphics library provided with BRL-CAD's source distribution. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_PNG @@ -514,8 +514,8 @@ --- BRLCAD_UTAHRLE --- Option for enabling and disabling compilation of the Utah Raster Toolkit -library provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system +library provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_UTAHRLE @@ -523,9 +523,9 @@ --- BRLCAD_TCL --- -Option for enabling and disabling compilation of the Tcl library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for +Option for enabling and disabling compilation of the Tcl library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_TCL @@ -533,14 +533,14 @@ --- BRLCAD_TK --- -Option for enabling and disabling compilation of the Tk library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the BRLCAD_TCL option and testing first for +Option for enabling and disabling compilation of the Tk library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the BRLCAD_TCL option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Option for enabling and disabling compilation of the Tk graphics package for Tcl provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is set to BUNDLED, local copy is built even if a system version is present. This option also depends on BRLCAD_ENABLE_TK being ON. @@ -551,8 +551,8 @@ Option for enabling and disabling compilation of the IncrTcl package for Tcl objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. Aliases: ENABLE_ITCL @@ -562,8 +562,8 @@ Option for enabling and disabling compilation of the IncrTcl itk package for Tk objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. @@ -574,10 +574,10 @@ Option for enabling and disabling compilation of the Togl package for Tcl/Tk OpenGL support provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This -package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK +package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK are OFF. Aliases: ENABLE_TOGL @@ -585,11 +585,11 @@ --- BRLCAD_IWIDGETS --- -Option for enabling and disabling compilation of the IWidgets Tk widget +Option for enabling and disabling compilation of the IWidgets Tk widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_IWIDGETS @@ -599,9 +599,9 @@ Option for enabling and disabling compilation of the Tkhtml HTML viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKHTML @@ -611,9 +611,9 @@ Option for enabling and disabling compilation of the tkpng PNG image viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKPNG @@ -623,9 +623,9 @@ Option for enabling and disabling compilation of the Tktable graphical table widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKTABLE @@ -635,7 +635,7 @@ Option for enabling and disabling compilation of the openNURBS library provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_OPENNURBS @@ -645,7 +645,7 @@ Option for enabling and disabling compilation of the NIST Step Class Libraries provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_SCL, ENABLE_STEP, ENABLE_STEP_CLASS_LIBRARIES This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2012-08-08 04:28:33
|
Revision: 51801 http://brlcad.svn.sourceforge.net/brlcad/?rev=51801&view=rev Author: starseeker Date: 2012-08-08 04:28:27 +0000 (Wed, 08 Aug 2012) Log Message: ----------- Sync INSTALL Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-08-07 22:03:51 UTC (rev 51800) +++ brlcad/trunk/INSTALL 2012-08-08 04:28:27 UTC (rev 51801) @@ -422,7 +422,7 @@ Option for enabling and disabling compilation of the Regular Expression Library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_REGEX @@ -432,7 +432,7 @@ Option for enabling and disabling compilation of the zlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to -the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_ZLIB, ENABLE_LIBZ @@ -442,7 +442,7 @@ Option for enabling and disabling compilation of the lemon parser provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_LEMON @@ -452,7 +452,7 @@ Option for enabling and disabling compilation of the re2c scanner utility provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_RE2C @@ -462,7 +462,7 @@ Option for enabling and disabling compilation of the perplex scanner generator provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. perplex requires a working re2c. Aliases: ENABLE_PERPLEX @@ -471,9 +471,9 @@ --- BRLCAD_XSLTPROC --- Option for enabling and disabling compilation of the xsltproc XML -transformation utilty provided with BRL-CAD's source distribution. Used +transformation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation processing. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Depends on BRLCAD_EXTRADOCS. Aliases: ENABLE_XSLTPROC @@ -482,9 +482,9 @@ --- BRLCAD_XMLLINT --- Option for enabling and disabling compilation of the xmllint XML -validation utilty provided with BRL-CAD's source distribution. Used +validation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation validation. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_XMLLINT @@ -494,7 +494,7 @@ Option for enabling and disabling compilation of the termlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. (Except when building with Visual Studio, where it is disabled. Windows does not support the termlib API.) @@ -505,7 +505,7 @@ Option for enabling and disabling compilation of the Portable Network Graphics library provided with BRL-CAD's source distribution. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_PNG @@ -514,8 +514,8 @@ --- BRLCAD_UTAHRLE --- Option for enabling and disabling compilation of the Utah Raster Toolkit -library provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system +library provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_UTAHRLE @@ -523,9 +523,9 @@ --- BRLCAD_TCL --- -Option for enabling and disabling compilation of the Tcl library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for +Option for enabling and disabling compilation of the Tcl library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_TCL @@ -533,14 +533,14 @@ --- BRLCAD_TK --- -Option for enabling and disabling compilation of the Tk library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the BRLCAD_TCL option and testing first for +Option for enabling and disabling compilation of the Tk library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the BRLCAD_TCL option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Option for enabling and disabling compilation of the Tk graphics package for Tcl provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is set to BUNDLED, local copy is built even if a system version is present. This option also depends on BRLCAD_ENABLE_TK being ON. @@ -551,8 +551,8 @@ Option for enabling and disabling compilation of the IncrTcl package for Tcl objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. Aliases: ENABLE_ITCL @@ -562,8 +562,8 @@ Option for enabling and disabling compilation of the IncrTcl itk package for Tk objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. @@ -574,10 +574,10 @@ Option for enabling and disabling compilation of the Togl package for Tcl/Tk OpenGL support provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This -package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK +package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK are OFF. Aliases: ENABLE_TOGL @@ -585,11 +585,11 @@ --- BRLCAD_IWIDGETS --- -Option for enabling and disabling compilation of the IWidgets Tk widget +Option for enabling and disabling compilation of the IWidgets Tk widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_IWIDGETS @@ -599,9 +599,9 @@ Option for enabling and disabling compilation of the Tkhtml HTML viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKHTML @@ -611,9 +611,9 @@ Option for enabling and disabling compilation of the tkpng PNG image viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKPNG @@ -623,9 +623,9 @@ Option for enabling and disabling compilation of the Tktable graphical table widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKTABLE @@ -635,7 +635,7 @@ Option for enabling and disabling compilation of the openNURBS library provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_OPENNURBS @@ -645,7 +645,7 @@ Option for enabling and disabling compilation of the NIST Step Class Libraries provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_SCL, ENABLE_STEP, ENABLE_STEP_CLASS_LIBRARIES This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <car...@us...> - 2012-08-09 15:46:04
|
Revision: 51841 http://brlcad.svn.sourceforge.net/brlcad/?rev=51841&view=rev Author: carlmoore Date: 2012-08-09 15:45:58 +0000 (Thu, 09 Aug 2012) Log Message: ----------- fix spellings and remove trailing blanks Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-08-09 15:42:54 UTC (rev 51840) +++ brlcad/trunk/INSTALL 2012-08-09 15:45:58 UTC (rev 51841) @@ -130,7 +130,7 @@ Mount the .dmg and run the Installer .pkg contained therein. This will install into /usr/brlcad/rel-X.Y.Z and will only require confirming that your environment is set up properly (i.e. add /usr/brlcad/rel-X.Y.Z/bin to your -path) as described in the Quck Installation section. +path) as described in the Quick Installation section. INSTALLING FROM SOURCE @@ -325,7 +325,7 @@ System PATH: Normally, BRL-CAD's install directories are not in system PATH lists and -consequently BRL-CAD's exectuables will not be invokable without specifying +consequently BRL-CAD's executables will not be invokable without specifying their full path. This is normally handled in Unix environments by adding the desired BRL-CAD installation's binary directory to the user's local path: @@ -422,7 +422,7 @@ Option for enabling and disabling compilation of the Regular Expression Library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_REGEX @@ -432,7 +432,7 @@ Option for enabling and disabling compilation of the zlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to -the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_ZLIB, ENABLE_LIBZ @@ -442,7 +442,7 @@ Option for enabling and disabling compilation of the lemon parser provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_LEMON @@ -452,7 +452,7 @@ Option for enabling and disabling compilation of the re2c scanner utility provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_RE2C @@ -462,7 +462,7 @@ Option for enabling and disabling compilation of the perplex scanner generator provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. perplex requires a working re2c. Aliases: ENABLE_PERPLEX @@ -471,9 +471,9 @@ --- BRLCAD_XSLTPROC --- Option for enabling and disabling compilation of the xsltproc XML -transformation utilty provided with BRL-CAD's source distribution. Used +transformation utility provided with BRL-CAD's source distribution. Used for DocBook documentation processing. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Depends on BRLCAD_EXTRADOCS. Aliases: ENABLE_XSLTPROC @@ -482,9 +482,9 @@ --- BRLCAD_XMLLINT --- Option for enabling and disabling compilation of the xmllint XML -validation utilty provided with BRL-CAD's source distribution. Used +validation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation validation. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_XMLLINT @@ -494,7 +494,7 @@ Option for enabling and disabling compilation of the termlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. (Except when building with Visual Studio, where it is disabled. Windows does not support the termlib API.) @@ -505,7 +505,7 @@ Option for enabling and disabling compilation of the Portable Network Graphics library provided with BRL-CAD's source distribution. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_PNG @@ -514,8 +514,8 @@ --- BRLCAD_UTAHRLE --- Option for enabling and disabling compilation of the Utah Raster Toolkit -library provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system +library provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_UTAHRLE @@ -523,9 +523,9 @@ --- BRLCAD_TCL --- -Option for enabling and disabling compilation of the Tcl library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for +Option for enabling and disabling compilation of the Tcl library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_TCL @@ -533,14 +533,14 @@ --- BRLCAD_TK --- -Option for enabling and disabling compilation of the Tk library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the BRLCAD_TCL option and testing first for +Option for enabling and disabling compilation of the Tk library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the BRLCAD_TCL option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Option for enabling and disabling compilation of the Tk graphics package for Tcl provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is set to BUNDLED, local copy is built even if a system version is present. This option also depends on BRLCAD_ENABLE_TK being ON. @@ -551,8 +551,8 @@ Option for enabling and disabling compilation of the IncrTcl package for Tcl objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. Aliases: ENABLE_ITCL @@ -562,8 +562,8 @@ Option for enabling and disabling compilation of the IncrTcl itk package for Tk objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. @@ -574,10 +574,10 @@ Option for enabling and disabling compilation of the Togl package for Tcl/Tk OpenGL support provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This -package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK +package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK are OFF. Aliases: ENABLE_TOGL @@ -585,11 +585,11 @@ --- BRLCAD_IWIDGETS --- -Option for enabling and disabling compilation of the IWidgets Tk widget +Option for enabling and disabling compilation of the IWidgets Tk widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_IWIDGETS @@ -599,9 +599,9 @@ Option for enabling and disabling compilation of the Tkhtml HTML viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKHTML @@ -611,9 +611,9 @@ Option for enabling and disabling compilation of the tkpng PNG image viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKPNG @@ -623,9 +623,9 @@ Option for enabling and disabling compilation of the Tktable graphical table widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKTABLE @@ -635,7 +635,7 @@ Option for enabling and disabling compilation of the openNURBS library provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_OPENNURBS @@ -645,7 +645,7 @@ Option for enabling and disabling compilation of the NIST Step Class Libraries provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_SCL, ENABLE_STEP, ENABLE_STEP_CLASS_LIBRARIES This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <car...@us...> - 2012-08-14 15:19:15
|
Revision: 52002 http://brlcad.svn.sourceforge.net/brlcad/?rev=52002&view=rev Author: carlmoore Date: 2012-08-14 15:19:08 +0000 (Tue, 14 Aug 2012) Log Message: ----------- remove trailing blanks/tabs and fix a spelling Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-08-14 15:17:03 UTC (rev 52001) +++ brlcad/trunk/INSTALL 2012-08-14 15:19:08 UTC (rev 52002) @@ -422,7 +422,7 @@ Option for enabling and disabling compilation of the Regular Expression Library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_REGEX @@ -432,7 +432,7 @@ Option for enabling and disabling compilation of the zlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to -the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_ZLIB, ENABLE_LIBZ @@ -442,7 +442,7 @@ Option for enabling and disabling compilation of the lemon parser provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_LEMON @@ -452,7 +452,7 @@ Option for enabling and disabling compilation of the re2c scanner utility provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_RE2C @@ -462,7 +462,7 @@ Option for enabling and disabling compilation of the perplex scanner generator provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. perplex requires a working re2c. Aliases: ENABLE_PERPLEX @@ -471,9 +471,9 @@ --- BRLCAD_XSLTPROC --- Option for enabling and disabling compilation of the xsltproc XML -transformation utilty provided with BRL-CAD's source distribution. Used +transformation utility provided with BRL-CAD's source distribution. Used for DocBook documentation processing. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Depends on BRLCAD_EXTRADOCS. Aliases: ENABLE_XSLTPROC @@ -482,9 +482,9 @@ --- BRLCAD_XMLLINT --- Option for enabling and disabling compilation of the xmllint XML -validation utilty provided with BRL-CAD's source distribution. Used +validation utilty provided with BRL-CAD's source distribution. Used for DocBook documentation validation. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_XMLLINT @@ -494,7 +494,7 @@ Option for enabling and disabling compilation of the termlib library provided with BRL-CAD's source distribution. Default is AUTO, responsive to the -toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if +toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. (Except when building with Visual Studio, where it is disabled. Windows does not support the termlib API.) @@ -505,7 +505,7 @@ Option for enabling and disabling compilation of the Portable Network Graphics library provided with BRL-CAD's source distribution. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_PNG @@ -514,8 +514,8 @@ --- BRLCAD_UTAHRLE --- Option for enabling and disabling compilation of the Utah Raster Toolkit -library provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system +library provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_UTAHRLE @@ -523,9 +523,9 @@ --- BRLCAD_TCL --- -Option for enabling and disabling compilation of the Tcl library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for +Option for enabling and disabling compilation of the Tcl library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_TCL @@ -533,14 +533,14 @@ --- BRLCAD_TK --- -Option for enabling and disabling compilation of the Tk library -provided with BRL-CAD's source code. Default is AUTO, responsive -to the BRLCAD_TCL option and testing first for +Option for enabling and disabling compilation of the Tk library +provided with BRL-CAD's source code. Default is AUTO, responsive +to the BRLCAD_TCL option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Option for enabling and disabling compilation of the Tk graphics package for Tcl provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_TK is set to BUNDLED, local copy is built even if a system version is present. This option also depends on BRLCAD_ENABLE_TK being ON. @@ -551,8 +551,8 @@ Option for enabling and disabling compilation of the IncrTcl package for Tcl objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. Aliases: ENABLE_ITCL @@ -562,8 +562,8 @@ Option for enabling and disabling compilation of the IncrTcl itk package for Tk objects provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. @@ -574,10 +574,10 @@ Option for enabling and disabling compilation of the Togl package for Tcl/Tk OpenGL support provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for -a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first for +a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL is set to BUNDLED, local copy is built even if a system version is present. This -package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK +package will be disabled if either BRLCAD_ENABLE_OPENGL or BRLCAD_ENABLE_TK are OFF. Aliases: ENABLE_TOGL @@ -585,11 +585,11 @@ --- BRLCAD_IWIDGETS --- -Option for enabling and disabling compilation of the IWidgets Tk widget +Option for enabling and disabling compilation of the IWidgets Tk widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_IWIDGETS @@ -599,9 +599,9 @@ Option for enabling and disabling compilation of the Tkhtml HTML viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKHTML @@ -611,9 +611,9 @@ Option for enabling and disabling compilation of the tkpng PNG image viewing package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKPNG @@ -623,9 +623,9 @@ Option for enabling and disabling compilation of the Tktable graphical table widget package provided with BRL-CAD's source distribution. Default is AUTO, -auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first -for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL -is set to BUNDLED, local copy is built even if a system version is present. +auto-enabling if the BRLCAD_TCL option is set to BUNDLED and testing first +for a system version if BRLCAD_TCL is set to AUTO or SYSTEM. If BRLCAD_ITCL +is set to BUNDLED, local copy is built even if a system version is present. This package will be disabled if BRLCAD_ENABLE_TK is OFF. Aliases: ENABLE_TKTABLE @@ -635,7 +635,7 @@ Option for enabling and disabling compilation of the openNURBS library provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_OPENNURBS @@ -645,7 +645,7 @@ Option for enabling and disabling compilation of the NIST Step Class Libraries provided with BRL-CAD's source code. Default is -AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing +AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. Aliases: ENABLE_SCL, ENABLE_STEP, ENABLE_STEP_CLASS_LIBRARIES This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <car...@us...> - 2012-08-15 17:37:10
|
Revision: 52029 http://brlcad.svn.sourceforge.net/brlcad/?rev=52029&view=rev Author: carlmoore Date: 2012-08-15 17:37:03 +0000 (Wed, 15 Aug 2012) Log Message: ----------- fix spelling of 'utility' Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-08-15 16:47:18 UTC (rev 52028) +++ brlcad/trunk/INSTALL 2012-08-15 17:37:03 UTC (rev 52029) @@ -482,7 +482,7 @@ --- BRLCAD_XMLLINT --- Option for enabling and disabling compilation of the xmllint XML -validation utilty provided with BRL-CAD's source distribution. Used +validation utility provided with BRL-CAD's source distribution. Used for DocBook documentation validation. Default is AUTO, responsive to the toplevel BRLCAD_BUNDLED_LIBS option and testing first for a system version if BRLCAD_BUNDLED_LIBS is also AUTO. This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |
From: <sta...@us...> - 2012-12-02 05:07:48
|
Revision: 53938 http://brlcad.svn.sourceforge.net/brlcad/?rev=53938&view=rev Author: starseeker Date: 2012-12-02 05:07:41 +0000 (Sun, 02 Dec 2012) Log Message: ----------- minor INSTALL tweak Modified Paths: -------------- brlcad/trunk/INSTALL Modified: brlcad/trunk/INSTALL =================================================================== --- brlcad/trunk/INSTALL 2012-12-02 05:02:52 UTC (rev 53937) +++ brlcad/trunk/INSTALL 2012-12-02 05:07:41 UTC (rev 53938) @@ -368,19 +368,6 @@ Aliases: ENABLE_OPENGL ---- BRLCAD_EXTRADOCS --- - -The core option that enables and disables building of BRL-CAD's DocBook -based documentation (includes manuals and man pages for commands, among -other things.) Defaults to ON, but only HTML and MAN formats are enabled -by default - PDF must be enabled separately by use of this option or one -of its aliases. Note that you may set environment variable APACHE_FOP -to point to your locally installed fop executable file (which on Linux is -usually a shell script with 0755 permissions). - -Aliases: ENABLE_DOCS, ENABLE_EXTRA_DOCS, ENABLE_DOCBOOK - - --- BRLCAD_ENABLE_RUNTIME_DEBUG --- Enables support for application and library debugging facilities. @@ -418,6 +405,19 @@ Aliases: ENABLE_STRICT, ENABLE_STRICT_COMPILE, ENABLE_STRICT_COMPILE_FLAGS +--- BRLCAD_EXTRADOCS --- + +The core option that enables and disables building of BRL-CAD's DocBook +based documentation (includes manuals and man pages for commands, among +other things.) Defaults to ON, but only HTML and MAN formats are enabled +by default - PDF must be enabled separately by use of this option or one +of its aliases. Note that you may set environment variable APACHE_FOP +to point to your locally installed fop executable file (which on Linux is +usually a shell script with 0755 permissions). + +Aliases: ENABLE_DOCS, ENABLE_EXTRA_DOCS, ENABLE_DOCBOOK + + --- BRLCAD_REGEX --- Option for enabling and disabling compilation of the Regular Expression Library This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site. |