From: <rog...@lo...> - 2008-04-24 11:02:06
|
Unload problem on Autochanger, I not 100% sure about the history of this problem, but I know that the automatic unload/load function dosn't work properly. To do it manually I have to stop bacula-sd service to be able to run #mtx unload. So when a tape is full the bacula jobb can't unload or load a new append volume. Is it a mtx problem or a permissions problem between bacula and mtx. I can move and load the new tape with the HP web admin site to the Autochanger without have to stop the bacula-sd service, then run mount command from bconsole. Then as you below the restore jobb that was waiting for a specific tape was able to continue. Any tips would be appreciated, as holiday times are coming up and changing tapes over vpn from the beach ain't much fun. ----------------------------------------------------------------- Roger Sinel ----------------------------------------------------------------- 24-Apr 10:07 server-dir: Start Restore Job RestoreFiles.2008-04-24_10.07.17 24-Apr 10:07 server-dir: Using Device "TapeDevice-1" 24-Apr 10:07 server-sd: 3307 Issuing autochanger "unload slot 11, drive 0" command. 24-Apr 10:07 server-sd: 3995 Bad autochanger "unload slot 11, drive 0": ERR=Child exited with code 1 Results=Unloading Data Transfer Element into Storage Element 11...mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Illegal Request mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 53 mtx: Request Sense: Additional Sense Qualifier = 03 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no MOVE MEDIUM 24-Apr 10:07 server-sd: 3301 Issuing autochanger "loaded? drive 0" command. 24-Apr 10:07 server-sd: 3302 Autochanger "loaded? drive 0", result is Slot 11. 24-Apr 10:09 server-sd: 3307 Issuing autochanger "unload slot 11, drive 0" command. 24-Apr 10:09 server-sd: 3995 Bad autochanger "unload slot 11, drive 0": ERR=Child exited with code 1 Results=Unloading Data Transfer Element into Storage Element 11...mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=70 (Current) mtx: Request Sense: Sense Key=Illegal Request mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 53 mtx: Request Sense: Additional Sense Qualifier = 03 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no MOVE MEDIUM 24-Apr 10:09 origo3-sd: Please mount Volume "TYV240L2" or label a new one for: Job: RestoreFiles.2008-04-24_10.07.17 Storage: "TapeDevice-1" (/dev/nst0) Pool: DiskPool Media type: LTO-G2 24-Apr 10:30 server-sd: 3301 Issuing autochanger "loaded? drive 0" command. 24-Apr 10:30 server-sd: 3302 Autochanger "loaded? drive 0", result is Slot 5. 24-Apr 10:30 server-sd: 3301 Issuing autochanger "loaded? drive 0" command. 24-Apr 10:30 server-sd: 3302 Autochanger "loaded? drive 0", result is Slot 5. 24-Apr 10:30 server-sd: Ready to read from volume "TYV240L2" on device "TapeDevice-1" (/dev/nst0). 24-Apr 10:30 server-sd: Forward spacing Volume "TYV240L2" to file:block 419:0. 24-Apr 10:33 server-sd: End of Volume at file 420 on device "TapeDevice-1" (/dev/nst0), Volume "TYV240L2" 24-Apr 10:33 server-sd: End of all volumes. 24-Apr 10:33 server-sd: Alert: TapeAlert[25]:Undefined. 24-Apr 10:33 server-dir: Bacula server-dir 2.2.0 (08Aug07): 24-Apr-2008 10:33:42 Build OS: x86_64-unknown-linux-gnu redhat (Stentz) JobId: 2749 Job: RestoreFiles.2008-04-24_10.07.17 Restore Client: gsa-fd Start time: 24-Apr-2008 10:07:19 End time: 24-Apr-2008 10:33:42 Files Expected: 1 Files Restored: 1 Bytes Restored: 1,163,036,463 Rate: 734.7 KB/s FD Errors: 0 FD termination status: OK SD termination status: OK Termination: Restore OK 24-Apr 10:33 origo3-dir: Begin pruning Jobs. 24-Apr 10:33 origo3-dir: No Jobs found to prune. 24-Apr 10:33 origo3-dir: Begin pruning Files. 24-Apr 10:33 origo3-dir: No Files found to prune. 24-Apr 10:33 origo3-dir: End auto prune. |