[Alsa-user] Problems with VIA8235 Southbridge
Brought to you by:
perex
From: Dan S. - J. U. A. <da...@su...> - 2002-11-29 18:39:14
|
Heya, I'll try to include as many of the vitals as I can. Essentially, I can get no sound to play. I am running 0.9.0-rc6. typhoon root # aplay /usr/kde/3/share/sounds/ktalkd.wav Playing WAVE '/usr/kde/3/share/sounds/ktalkd.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono aplay: pcm_write:999: write error: Input/output error less -f on /dev/snd/pcmC0D0p produces a read error. Hardware vitals: http://www.biostar-usa.com/products/socketA/m7viq/m7viq_specs.htm VT8235 Southbridge AC'97 2.2 Audio CODEC Kernel Vitals: Gentoo Linux: 1.4-rc1 2.4.19 Kernel The modules compile and insert without any complaints. typhoon modules.d # less alsa # Alsa 0.9.X kernel modules' configuration file. # $Header: /home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.c onf,v 1.3 2002/06/24 18:05:58 agenkin Exp $ # ALSA portion alias char-major-116 snd options snd major=3D116 cards_limit=3D1 # Soundcard alias snd-card-0 snd-via82xx # OSS/Free portion alias char-major-14 soundcore ## ## IMPORTANT: ## You need to customise this section for your specific sound card(s) ## and then run =15pdate-modules' command. ## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ## ## ALSA portion ## alias snd-card-0 snd-interwave ## alias snd-card-1 snd-ens1371 ## OSS/Free portion alias sound-slot-0 snd-card-0 ## alias sound-slot-1 snd-card-1 ## # OSS/Free portion - card #1 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss ## OSS/Free portion - card #2 ## alias sound-service-1-0 snd-mixer-oss ## alias sound-service-1-3 snd-pcm-oss ## alias sound-service-1-12 snd-pcm-oss alias /dev/mixer snd-mixer-oss alias /dev/dsp snd-pcm-oss alias /dev/midi snd-seq-oss typhoon modules.d # lsmod Module Size Used by Not tainted snd-pcm-oss 39332 0 (autoclean) snd-mixer-oss 13592 0 (autoclean) [snd-pcm-oss] snd-via82xx 9388 0 snd-pcm 62528 0 [snd-pcm-oss snd-via82xx] snd-timer 12456 0 [snd-pcm] snd-ac97-codec 30436 0 [snd-via82xx] snd-mpu401-uart 3776 0 [snd-via82xx] snd-rawmidi 14976 0 [snd-mpu401-uart] snd-seq-device 4320 0 [snd-rawmidi] snd 29932 0 [snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device] soundcore 3524 3 [snd] typhoon modules.d # cat /proc/interrupts CPU0 0: 18991842 IO-APIC-edge timer 1: 186440 IO-APIC-edge keyboard 2: 0 XT-PIC cascade 14: 288327 IO-APIC-edge ide0 15: 4 IO-APIC-edge ide1 16: 12919753 IO-APIC-level usb-uhci, eth0 17: 0 IO-APIC-level usb-uhci 18: 0 IO-APIC-level usb-uhci, VIA8233 NMI: 0 LOC: 18991881 ERR: 0 MIS: 0 (Disabling IRQs for the USB interface produces no change). If theres anymore information I can give, I'll be happy to provide. |