thanks so much Javier for the prompt response.
I have downloaded the latest code from CVS repository and
it has the method transmit_802_11_packet() as mentioned by
Thanks once again.
From: Javier Achirica [mailto:achirica@...]
Sent: 15 April, 2003 4:28 PM
To: Anurag Aggarwal, Noida
Cc: Benjamin Reed
Subject: Re: FW: [Airo-linux-gen80211] RE: Transmitting Raw 802.11 MAC
frames using Cisco 350 series Car d
In the latest versions of the driver, there's an alternative code (not
very well tested, though) for raw 802.11 frames: transmit_802_11_packet()
Take a look at the code in kernel 2.4.20 or at
the CVS at airo-linux.sourceforge.net
On Tue, 15 Apr 2003, Anurag Aggarwal, Noida wrote:
> -----Original Message-----
> From: Anurag Aggarwal, Noida
> Sent: 15 April, 2003 3:33 PM
> To: breed@...
> Cc: airo-linux-gen80211@...
> Subject: [Airo-linux-gen80211] RE: Transmitting Raw 802.11 MAC frames
> using Cisco 350 series Car d
> Hi Benjamin,
> The current driver for the Cisco Aironet 350 series
> wireless cards implements the interface transmit_802_3_packet() interface
> and allows one to only transmit Ethernet packets. What if one wants to
> hand a raw 802.11 MAC frame to the card for transmission? Has anyone
> on this? I want to be able to send and receive 802.11 MAC frames. I guess
> the delivers received data in raw MAC frame format if the receive mode is
> set to RXMODE_DISABLE_802_3_HEADER. But I was stuck with as to how I can
> 80211 frames. BTW I want to transmit raw frames because I want to control
> the receiver
> and transmitter address fields.
> Waiting for your prompt reply.
> Anurag Agarwal
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> Airo-linux-gen80211 mailing list