From: Daniel Kalchev <daniel@di...> - 2001-02-24 08:39:00
You need not be concerned with the IP settings of the AP itself,
except that you may wish to assign it an IP address so that you can
manage it via web browser.
The AP is in fact transparent to the clients - that is the PC4800
card. Thus all settings you should do at the computer where this
PC4800 is installed - perhaps you should verify that the proper
protocols (TCP/IP?) are installed in the Network control panel
(assuming you are using windows) and that you enabled DHCP there -
should be on by default - but with Windows nothing can be assumed.
By the way, setting up AP4800 and PC4800 should be trully plug and
play - these should associate immediately if placced in close
proximity. If there is no association, you may wish to verify the SSID
on the PC4800 - it should be the default "tsunami" (without quotes).