Learn how easy it is to sync an existing GitHub or Google Code repo to a SourceForge project! See Demo

Close

couldn't start program 2

2007-03-20
2013-04-26
  • Hi!

    when start air under bash/root it remain in wait-state for a long time.

    this is the console output :

    root@4[~]# air
    /root/.airrc opened for read.
    Attempting to load scsi module...FATAL: Module scsi_hostadapter not found.
    Couldn't load scsi module. Return value of 'modprobe scsi_hostadapter' = 1.
    Checking for ide device /dev/hda...
    media for hda is: disk

    found /dev/hda

    /dev/hda:
    setting using_dma to 1 (on)
    using_dma    =  1 (on)
    Checking for ide device /dev/hdb...
    Checking for ide device /dev/hdc...
    media for hdc is: cdrom

    found /dev/hdc

    /dev/hdc:
    setting using_dma to 1 (on)
    using_dma    =  1 (on)
    Checking for ide device /dev/hdd...
    Checking for ide device /dev/hde...
    Checking for ide device /dev/hdf...
    Checking for ide device /dev/hdg...
    Checking for ide device /dev/hdh...
    Checking for scsi disk /dev/sda...
    found /dev/sda
    Checking for scsi disk /dev/sdb...
    found /dev/sdb
    Checking for scsi disk /dev/sdc...
    found /dev/sdc
    Checking for scsi disk /dev/sdd...
    found /dev/sdd
    Checking for scsi disk /dev/sde...
    Checking for scsi disk /dev/sdf...
    Checking for scsi cd-rom /dev/scd0...
    Checking for scsi cd-rom /dev/scd1...
    Checking for scsi tape /dev/nst0...
    mt: /dev/nst0: Nessun file o directory (=None file or directory)
    Checking for scsi tape /dev/nst1...
    mt: /dev/nst1: Nessun file o directory
    Checking for scsi tape /dev/nst2...
    mt: /dev/nst2: Nessun file o directory
    Checking for scsi tape /dev/nst3...
    mt: /dev/nst3: Nessun file o directory
    Checking for scsi tape /dev/nst4...
    mt: /dev/nst4: Nessun file o directory

    Checking for helper apps...
    /bin/dd
    /bin/mt
    /sbin/sfdisk
    /usr/bin/md5sum
    /usr/bin/split
    /usr/bin/sha1sum
    /bin/gzip
    /bin/gunzip
    /bin/bzip2
    /bin/bunzip2
    /usr/local/bin/air-counter
    /usr/local/bin/tailer
    /usr/bin/tee
    Checking for dcfldd...
    /usr/bin/dcfldd
    Checking for netcat and/or cryptcat...
    /bin/nc
    /usr/bin/cryptcat

    this is last line, air frontend not start.

    I would appreciate your help.
    thanks,
    Alessandro