Menu
▾
▴
[Acx100-devel] [ acx100-Support Requests-848560 ] DWL-520+ won't connect using Mandrake 9.2
|
From: SourceForge.net <no...@so...> - 2003-12-02 12:17:54
|
Support Requests item #848560, was opened at 2003-11-24 21:13 Message generated for change (Comment added) made by andim2 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543746&aid=848560&group_id=75380 Category: Install Problem (example) Group: None >Status: Closed Priority: 5 Submitted By: patrick hendriks (rogue_pat) Assigned to: Nobody/Anonymous (nobody) Summary: DWL-520+ won't connect using Mandrake 9.2 Initial Comment: Got Mandrake 9.2 Download edition. Installed the kernel-sources & wireless tools Got 0.2.0pre5 plus WinXP drivers [cd, including AIRPLUS.Bin]. Compilation completes fine Modified the start_net script to suit my needs. When running the script, i get the following syslog, resulting in a non-working DWL-520+ card. Any help? Nov 23 17:30:33 localhost kernel: acx100: It looks like you were coaxed into buying a wireless network card Nov 23 17:30:33 localhost kernel: acx100: that uses the mysterious ACX100 chip from Texas Instruments. Nov 23 17:30:33 localhost kernel: acx100: You should better have bought e.g. a PRISM(R) chipset based card, Nov 23 17:30:33 localhost kernel: acx100: since that would mean REAL vendor Linux support. Nov 23 17:30:33 localhost kernel: acx100: Given this info, it's plain evident that this driver is EXPERIMENTAL, Nov 23 17:30:33 localhost kernel: acx100: thus your mileage may vary. Visit http://acx100.sf.net for support. Nov 23 17:30:33 localhost kernel: init_module: TI acx100_pci.o: Ver 0.1h Loaded Nov 23 17:30:33 localhost kernel: init_module: dev_info is: TI acx100_pci Nov 23 17:30:33 localhost kernel: PCI: Found IRQ 10 for device 00:0b.0 Nov 23 17:30:33 localhost kernel: PCI: Sharing IRQ 10 with 00:11.0 Nov 23 17:30:33 localhost kernel: A Acx100 PCI device found, phymem1:0xd5000000, phymem2:0xd4800000, irq:10, mem1:0xe0baf000, mem2:0xe52a2000 Nov 23 17:30:34 localhost kernel: stop queue after setup. Nov 23 17:30:34 localhost kernel: Allocated 33708 bytes for firmware module loading. Nov 23 17:30:34 localhost kernel: WriteACXImage (firmware): 1, ValidateACXImage: 1 Nov 23 17:30:34 localhost kernel: ****************************************** Nov 23 17:30:34 localhost kernel: ************ acx100_initmac_1 ************ Nov 23 17:30:34 localhost kernel: ****************************************** Nov 23 17:30:34 localhost kernel: ==> Get the mailbox pointers from the scratch pad registers Nov 23 17:30:34 localhost kernel: CmdMailboxOffset = fdc8 Nov 23 17:30:34 localhost kernel: InfoMailboxOffset = ff4c Nov 23 17:30:34 localhost kernel: <== Get the mailbox pointers from the scratch pad registers Nov 23 17:30:34 localhost kernel: CommandParameters = [ 0xE52B1DCC ] Nov 23 17:30:34 localhost kernel: InfoParameters = [ 0xE52B1F50 ] Nov 23 17:30:34 localhost kernel: Allocated 920 bytes for firmware module loading. Nov 23 17:30:34 localhost kernel: WriteACXImage (radio): 1, ValidateACXImage: 1 Nov 23 17:30:34 localhost kernel: CodeEnd:8730 Nov 23 17:30:34 localhost kernel: writing WEP options. Nov 23 17:30:34 localhost kernel: <== Initialize the Queue Indicator Nov 23 17:30:34 localhost kernel: pDc->pFrameHdrQPool = 0xc082f000 Nov 23 17:30:34 localhost kernel: pDc->pFrameHdrQPoolPhyAddr = 0x 82f000 Nov 23 17:30:34 localhost kernel: pDc->TxBufferPool = 0xc0800000 Nov 23 17:30:34 localhost kernel: pDc->TxBufferPoolPhyAddr = 0x 800000 Nov 23 17:30:34 localhost kernel: pDc->pTxHostDescQPool = 0xc082e000 Nov 23 17:30:34 localhost kernel: pDc->TxHostDescQPoolPhyAddr = 0x 82e000 Nov 23 17:30:34 localhost kernel: pAdapter->rHWInfo.pvMemBaseAddr2 = 0xe52a2000 Nov 23 17:30:34 localhost kernel: pDc->ui32ACXTxQueueStart = 0x00008ad8 Nov 23 17:30:34 localhost kernel: pDc->pTxDescQPool = 0xe52aaad8 Nov 23 17:30:34 localhost kernel: pDc->pRxHostDescQPool = 0xc082d000 Nov 23 17:30:34 localhost kernel: pDc->RxHostDescQPoolPhyAddr = 0x 82d000 Nov 23 17:30:34 localhost kernel: pDc->pRxBufferPool = 0xc07e0000 Nov 23 17:30:34 localhost kernel: pDc->RxBufferPoolPhyAddr = 0x 7e0000 Nov 23 17:30:34 localhost kernel: SSID = STA1E27F6, len = 9 Nov 23 17:30:34 localhost kernel: Beacon length:61 Nov 23 17:30:34 localhost kernel: SSID = STA1E27F6, len = 9 Nov 23 17:30:34 localhost kernel: SetProberTemp: cb = 61 Nov 23 17:30:34 localhost kernel: acx100: form factor 0x01 (UNKNOWN, please report!), radio type 0x0d (Maxim), EEPROM version 0x0000. Uploaded firmware 'Rev 1.9.3.e' (0x01020505). Nov 23 17:30:34 localhost /etc/hotplug/net.agent: register event not handled Nov 23 17:30:38 localhost kernel: SSID = STA1E27F6, len = 9 Nov 23 17:30:38 localhost kernel: Beacon length:61 Nov 23 17:30:38 localhost kernel: SSID = STA1E27F6, len = 9 Nov 23 17:30:38 localhost kernel: SetProberTemp: cb = 61 Nov 23 17:30:38 localhost kernel: SSID = PatPlace, len = 8 Nov 23 17:30:38 localhost kernel: Beacon length:60 Nov 23 17:30:38 localhost kernel: SSID = PatPlace, len = 8 Nov 23 17:30:38 localhost kernel: SetProberTemp: cb = 60 Nov 23 17:30:38 localhost kernel: Warning: WEP support might not be supported in Ad-Hoc mode yet! Nov 23 17:30:38 localhost kernel: <AcxSetStatus> iStatus = 0 (STARTED) Nov 23 17:30:38 localhost kernel: <acx100_set_timer> Elapse = 1500000 Nov 23 17:30:38 localhost kernel: ctlIssueCommand failed: INvalid InfoEle [1050 uSec] Nov 23 17:30:38 localhost kernel: <acx100_join_bssid> BSS_Type = 2 Nov 23 17:30:38 localhost kernel: <acx100_join_bssid> JoinBSSID MAC:00 00 00 00 00 00 Nov 23 17:30:38 localhost kernel: <AcxSetStatus> iStatus = 1 (SCANNING) Nov 23 17:30:38 localhost kernel: <acx100_set_timer> Elapse = 3000000 Nov 23 17:30:38 localhost kernel: ctlIssueCommand failed: INvalid InfoEle [1100 uSec] Nov 23 17:30:38 localhost kernel: <AcxSetStatus> iStatus = 1 (SCANNING) Nov 23 17:30:38 localhost kernel: <acx100_set_timer> Elapse = 3000000 Nov 23 17:30:38 localhost kernel: ctlIssueCommand failed: INvalid InfoEle [1100 uSec] Nov 23 17:30:38 localhost kernel: ctlIssueCommand failed: Unknown(0xf) [1200 uSec] Nov 23 17:30:38 localhost kernel: pkt c07e000c info: time 4333835, silence 98, signal 0 Nov 23 17:30:38 localhost kernel: Receiving packet 00 (MGMT/Beacon): fc 0x0080, length 66, mode = 2, iStatus 1 Nov 23 17:30:38 localhost kernel: ProcessProbeResponse: found and registered station 0 (00 80 C8 0B DE 4C) with ESSID PatPlace and channel 6, SIR 98, SNR 0. Nov 23 17:30:38 localhost kernel: pkt c07e0962 info: time 4436235, silence 96, signal 0 Nov 23 17:30:38 localhost kernel: Receiving packet 01 (MGMT/Beacon): fc 0x0080, length 66, mode = 2, iStatus 1 Nov 23 17:30:38 localhost kernel: checking station 0 [00 80 C8 0B DE 4C] Nov 23 17:30:38 localhost kernel: station already in our list, no need to add. Nov 23 17:30:39 localhost kernel: pkt c07e12b8 info: time 5357829, silence 96, signal 0 Nov 23 17:30:39 localhost kernel: Receiving packet 02 (MGMT/Beacon): fc 0x0080, length 66, mode = 2, iStatus 1 Nov 23 17:30:39 localhost kernel: checking station 0 [00 80 C8 0B DE 4C] Nov 23 17:30:39 localhost kernel: station already in our list, no need to add. Nov 23 17:30:39 localhost kernel: pkt c07e1c0e info: time 5460229, silence 98, signal 0 Nov 23 17:30:39 localhost kernel: Receiving packet 03 (MGMT/Beacon): fc 0x0080, length 66, mode = 2, iStatus 1 Nov 23 17:30:39 localhost kernel: checking station 0 [00 80 C8 0B DE 4C] Nov 23 17:30:39 localhost kernel: station already in our list, no need to add. Nov 23 17:30:40 localhost kernel: Radio scan found 1 stations in this area. Nov 23 17:30:40 localhost kernel: <Scan Table> 0: SSID="PatPlace",CH=6,SIR=98,SNR=0 Nov 23 17:30:40 localhost kernel: ESSID matches: "PatPlace" (station), "PatPlace" (config) Nov 23 17:30:40 localhost kernel: needed_cap 0x01 cap: 0x51 Nov 23 17:30:40 localhost kernel: matching station found!! Nov 23 17:30:40 localhost kernel: d11CompleteScan: matching station FOUND (idx 0), JOINING (00 80 C8 0B DE 4C). Nov 23 17:30:40 localhost kernel: <acx100_join_bssid> BSS_Type = 2 Nov 23 17:30:40 localhost kernel: <acx100_join_bssid> JoinBSSID MAC:00 80 C8 0B DE 4C Nov 23 17:30:40 localhost kernel: Sending authentication1 request, awaiting response! Nov 23 17:30:40 localhost kernel: Sending packet (MGMT/Authen): length 30, hdr_len 24, pyld_len 6, mode = 2, iStatus 1 Nov 23 17:30:40 localhost kernel: <AcxSetStatus> iStatus = 2 (WAIT_AUTH) Nov 23 17:30:40 localhost kernel: <acx100_set_timer> Elapse = 1500000 Nov 23 17:30:40 localhost kernel: ctlIssueCommand failed: INvalid InfoEle [8650 uSec] Nov 23 17:30:40 localhost kernel: pkt c07e2564 info: time 6489685, silence 96, signal 0 Nov 23 17:30:40 localhost kernel: NOT receiving packet (CTL/UNKNOWN): size too small (14) Nov 23 17:30:40 localhost kernel: pkt c07e2eba info: time 6586623, silence 98, signal 0 ---------------------------------------------------------------------- >Comment By: Andreas Mohr (andim2) Date: 2003-12-02 13:17 Message: Logged In: YES user_id=132674 0.1h is MUCH too old (and much buggier than newer versions). Please use a recent version. Thanks! ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=543746&aid=848560&group_id=75380 |