I've got a problem with the acx100-mac80211 driver
Loading the driver gives some strange "BUG"-messages in dmesg
The kernel I've used is an 2.6.23-ARCH (from archlinux.org)
The PC got 128 megs RAM and an Intel Celeron processor
My card is an Origo PCMCIA card (picture of it here: http://isrv01.21byte.de/products/22/06/1002-11MBit-WLAN-PCMCIA-Card-TW.138x138.jpg\)
The old (non-mac80211) driver works fine here
I'm using the same firmware file for both drivers
My computer locks up after running 'ifconfig wlan0 up'
I've loaded the driver with 'modprobe acx-mac80211 debug=0xffff'
Here's my kernel log's output: http://phpfi.com/272220
It seems that there's no debug output after the lockup (I've double checked that!)
If you need more information -> just tell me
Same problem here with acx-mac80211-20080210 and kernel 2.6.22. acx-20080210 is working.
ok, forget the acx100 stuff...
I am using NDISwrapper now. It simply works - even with WPA2...