From: Hamie <ha...@tr...> - 2005-03-04 21:07:41
|
Hi all. I have an athlon64 in an Asus A8V motherboard, running gentoo with kernel 2.6.11 (Also tried with 2.6.9 and 2.6.10). Although it works, and cool&quiet kicks in before boot, I can get no thermal or fan information from acpi... dmesg sees damned acpi # dmesg | grep -i acpi BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fa810 ACPI: XSDT (v001 A M I OEMXSDT 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x10000427 MSFT 0x00000097) @ 0x000000003ffc0040 ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired ACPI Namespace successfully loaded at root ffffffff805b8f00 evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful ACPI: Subsystem revision 20041105 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. pnp: PnP ACPI init acpi_bus-0081 [03] acpi_bus_get_device : Error getting context for object [000001003ff8aa30] pnp: PnP ACPI: found 15 devices PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169 ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 177 ACPI wakeup devices: ACPI: (supports S0 S1 S3 S4 S5) ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 185 ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 169 acpi_utils-0071 [04] acpi_extract_package : Invalid 'package' argument acpi_processor-1046 [03] acpi_processor_get_per: Invalid _PSS data Modules are loaded... damned acpi # lsmod Module Size Used by fan 4872 0 thermal 17676 0 powernow_k8 8712 0 freq_table 3720 1 powernow_k8 processor 25212 2 thermal,powernow_k8 ohci1394 27268 0 ieee1394 352280 1 ohci1394 ehci_hcd 26820 0 ohci_hcd 18888 0 sk98lin 148012 1 damned acpi # But /proc/acpi/thermal_zone & fan are empty... ( Is there something else I should be doing? I've also trued the acpi4asus module, but it complains about missing hardware, so presumably that's only any good for their laptops... What sort of info & control SHOULD I be able to see out of this motherboard? How can I get the level of control that Asus offer with their windoze applications? TIA hamish |