Email Archive: smartmontools-support (read-only)
|
[smartmontools-support]smartmontools-5.33: problem with IBM IC35L073UCDY10-0 disks?
From: Andreas Haumer <andreas@xs...> - 2004-11-06 12:55
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi!
Today I tried to upgrade from smartmontools v5.27 to v5.33
and I noticed some problems with IBM IC35L073UCDY10-0 disks.
On all those disks I tested, smartctl prints the report,
hangs for a few seconds, then prints the last two lines with
some error message and the SCSI driver reports an SCSI error.
These failure was reproduced on 4 different disks (but all are
the same model, see above!) on two different machines:
1.) System "zeppelin", SCSI ID 0
root@... {640} $ smartctl -a /dev/scsi/host0/bus0/target0/lun0/disc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: IBM IC35L073UWDY10-0 Version: S23C
Serial number: E6V4JMDB
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Sat Nov 6 12:02:16 2004 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: 47 C
Drive Trip Temperature: 85 C
Manufactured in week 38 of year 2002
Current start stop count: 10 times
Recommended maximum start stop count: 10000 times
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 2231.438 0
write: 0 0 0 0 0 150.549 0
verify: 0 0 0 0 0 73.408 0
Non-medium error count: 0
Error Events logging not supported
scsiPrintSelfTest Failed [No such device]
[...]
2.) System "tolstoi", SCSI ID 0
root@... {650} $ smartctl -a /dev/scsi/host0/bus0/target0/lun0/disc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: IBM IC35L073UCDY10-0 Version: S23C
Serial number: E6L2R71B
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Sat Nov 6 12:27:58 2004 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: 32 C
Drive Trip Temperature: 85 C
Manufactured in week 50 of year 2002
Current start stop count: 15 times
Recommended maximum start stop count: 10000 times
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 7065.786 0
write: 0 0 0 2 2 3429.436 0
verify: 0 0 0 0 0 73.410 0
Non-medium error count: 0
Error Events logging not supported
scsiPrintSelfTest Failed [Input/output error]
[...]
3.) System "tolstoi", SCSI ID 1
root@... {652} $ smartctl -a /dev/scsi/host0/bus0/target1/lun0/disc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: IBM IC35L073UCDY10-0 Version: S23C
Serial number: E6V4J75B
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Sat Nov 6 13:01:46 2004 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: 36 C
Drive Trip Temperature: 85 C
Manufactured in week 38 of year 2002
Current start stop count: 18 times
Recommended maximum start stop count: 10000 times
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 9224.936 0
write: 0 0 0 1 1 3474.713 0
verify: 0 0 0 0 0 73.408 0
Non-medium error count: 0
Error Events logging not supported
scsiPrintSelfTest Failed [Input/output error]
[...]
4.) System "tolstoi", SCSI ID 2
root@... {653} $ smartctl -a /dev/scsi/host0/bus0/target2/lun0/disc
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
Device: IBM IC35L073UCDY10-0 Version: S23C
Serial number: E6V4JJ7B
Device type: disk
Transport protocol: Fibre channel (FCP-2)
Local Time is: Sat Nov 6 13:35:51 2004 CET
Device supports SMART and is Enabled
Temperature Warning Disabled or Not Supported
SMART Health Status: OK
Current Drive Temperature: 38 C
Drive Trip Temperature: 85 C
Manufactured in week 38 of year 2002
Current start stop count: 18 times
Recommended maximum start stop count: 10000 times
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
EEC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 0 0 0 0 9365.306 0
write: 0 0 0 0 0 3495.802 0
verify: 0 0 0 0 0 73.408 0
Non-medium error count: 0
Error Events logging not supported
scsiPrintSelfTest Failed [Input/output error]
[...]
System "tolstoi" is running with Linux-2.4.26 and has a LSI53C1030
SCSI controller with Fusion MPT driver. System "zeppelin" is running
with Linux-2.4.28rc1 and has an Adaptec 29160 Ultra160 SCSI adapter.
The SCSI errors logged look like this:
On the machine with the LSI controller (Fusion MPT driver):
[...]
Nov 6 12:28:08 tolstoi kernel: scsi : aborting command due to timeout : pid 19824163, scsi0, channel 0, id 0, lun 0 Log Sense 00 47 00 00 00 00 00 04 00
Nov 6 12:28:08 tolstoi kernel: mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f748c400)
Nov 6 12:28:08 tolstoi kernel: IOs outstanding = 2
Nov 6 12:28:09 tolstoi kernel: SCSI host 0 abort (pid 19824163) timed out - resetting
Nov 6 12:28:09 tolstoi kernel: SCSI bus is being reset for host 0 channel 0.
Nov 6 12:28:09 tolstoi kernel: mptscsih: OldReset scheduling BUS_RESET (sc=f748c400)
Nov 6 12:28:09 tolstoi kernel: IOs outstanding = 3
Nov 6 12:28:19 tolstoi kernel: SCSI host 0 channel 0 reset (pid 19824170) timed out - trying harder
Nov 6 12:28:19 tolstoi kernel: SCSI bus is being reset for host 0 channel 0.
Nov 6 12:28:19 tolstoi kernel: mptscsih: OldReset scheduling BUS_RESET (sc=f748c400)
Nov 6 12:28:19 tolstoi kernel: IOs outstanding = 3
Nov 6 12:28:19 tolstoi kernel: SCSI host 0 reset (pid 19824170) timed out again -
Nov 6 12:28:19 tolstoi kernel: probably an unrecoverable SCSI bus or device hang.
Nov 6 12:28:21 tolstoi kernel: SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 27010000
Nov 6 12:28:21 tolstoi kernel: I/O error: dev 08:02, sector 4234128
[...]
On the machine with the Adaptec controller:
[...]
Nov 6 12:02:48 zeppelin kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Nov 6 12:02:48 zeppelin kernel: CDB: 0x4d 0x0 0x47 0x0 0x0 0x0 0x0 0x0 0x4 0x0
Nov 6 12:02:48 zeppelin kernel: scsi0: At time of recovery, card was not paused
Nov 6 12:02:48 zeppelin kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Nov 6 12:02:48 zeppelin kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x8
Nov 6 12:02:48 zeppelin kernel: Card was paused
Nov 6 12:02:48 zeppelin kernel: ACCUM = 0x0, SINDEX = 0x17, DINDEX = 0xe4, ARG_2 = 0x0
Nov 6 12:02:48 zeppelin kernel: HCNT = 0x0 SCBPTR = 0x4
Nov 6 12:02:48 zeppelin kernel: SCSIPHASE[0x0] SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0]
Nov 6 12:02:48 zeppelin kernel: LASTPHASE[0x1] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x0]
Nov 6 12:02:48 zeppelin kernel: SEQCTL[0x10] SEQ_FLAGS[0xc0] SSTAT0[0x0] SSTAT1[0x8]
Nov 6 12:02:48 zeppelin kernel: SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xa4]
Nov 6 12:02:48 zeppelin kernel: SXFRCTL0[0x80] DFCNTRL[0x0] DFSTATUS[0x89]
Nov 6 12:02:48 zeppelin kernel: STACK: 0x0 0x163 0x109 0x3
Nov 6 12:02:48 zeppelin kernel: SCB count = 65
Nov 6 12:02:48 zeppelin kernel: Kernel NEXTQSCB = 55
Nov 6 12:02:48 zeppelin kernel: Card NEXTQSCB = 55
Nov 6 12:02:48 zeppelin kernel: QINFIFO entries:
Nov 6 12:02:48 zeppelin kernel: Waiting Queue entries:
Nov 6 12:02:48 zeppelin kernel: Disconnected Queue entries: 19:1 3:52
Nov 6 12:02:48 zeppelin kernel: QOUTFIFO entries:
Nov 6 12:02:48 zeppelin kernel: Sequencer Free SCB List: 4 2 29 10 11 1 16 5 26 18 25 28 7 21 31 0 20 6 22 15 30 17 12 27 23 8 13 24 9 14
Nov 6 12:02:48 zeppelin kernel: Sequencer SCB Info:
Nov 6 12:02:48 zeppelin kernel: 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 2 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 3 SCB_CONTROL[0x64] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x34]
Nov 6 12:02:48 zeppelin kernel: 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 16 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 17 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 18 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 19 SCB_CONTROL[0x64] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x1]
Nov 6 12:02:48 zeppelin kernel: 20 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 21 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:48 zeppelin kernel: 22 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 23 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 24 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 25 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 26 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 27 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 28 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 29 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 30 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: 31 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:49 zeppelin kernel: Pending list:
Nov 6 12:02:49 zeppelin kernel: 1 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:02:49 zeppelin kernel: 52 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:02:49 zeppelin kernel: Kernel Free SCB list: 23 63 40 59 60 58 51 49 33 3 38 64 47 45 19 43 13 32 0 31 44 28 20 54 53 18 16 4 17 5 61 9 30 11 10 24 36 2 7 8 39 46 57 35 26 15 25 41 37 27 50 12 29
42 62 56 6 48 21 14 22 34
Nov 6 12:02:49 zeppelin kernel: DevQ(0:0:0): 0 waiting
Nov 6 12:02:49 zeppelin kernel: DevQ(0:1:0): 0 waiting
Nov 6 12:02:49 zeppelin kernel:
Nov 6 12:02:49 zeppelin kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Nov 6 12:02:49 zeppelin kernel: (scsi0:A:0:0): Device is disconnected, re-queuing SCB
Nov 6 12:02:49 zeppelin kernel: (scsi0:A:0:0): Abort Tag Message Sent
Nov 6 12:02:49 zeppelin kernel: Recovery code sleeping
Nov 6 12:02:49 zeppelin kernel: (scsi0:A:0:0): SCB 52 - Abort Tag Completed.
Nov 6 12:02:49 zeppelin kernel: Recovery SCB completes
Nov 6 12:02:49 zeppelin kernel: Recovery code awake
Nov 6 12:02:49 zeppelin kernel: aic7xxx_abort returns 0x2002
Nov 6 12:02:58 zeppelin kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Nov 6 12:02:58 zeppelin kernel: CDB: 0x0 0x0 0x0 0x0 0x0 0x0
Nov 6 12:02:58 zeppelin kernel: scsi0: At time of recovery, card was not paused
Nov 6 12:02:58 zeppelin kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Nov 6 12:02:58 zeppelin kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x16b
Nov 6 12:02:58 zeppelin kernel: Card was paused
Nov 6 12:02:58 zeppelin kernel: ACCUM = 0x37, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0xd
Nov 6 12:02:58 zeppelin kernel: HCNT = 0x0 SCBPTR = 0x3
Nov 6 12:02:58 zeppelin kernel: SCSIPHASE[0x0] SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0x0]
Nov 6 12:02:58 zeppelin kernel: LASTPHASE[0x1] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0xc2]
Nov 6 12:02:58 zeppelin kernel: SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x0]
Nov 6 12:02:58 zeppelin kernel: SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
Nov 6 12:02:58 zeppelin kernel: SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
Nov 6 12:02:58 zeppelin kernel: STACK: 0x34 0xe1 0x0 0x178
Nov 6 12:02:58 zeppelin kernel: SCB count = 65
Nov 6 12:02:58 zeppelin kernel: Kernel NEXTQSCB = 52
Nov 6 12:02:58 zeppelin kernel: Card NEXTQSCB = 52
Nov 6 12:02:58 zeppelin kernel: QINFIFO entries:
Nov 6 12:02:58 zeppelin kernel: Waiting Queue entries:
Nov 6 12:02:58 zeppelin kernel: Disconnected Queue entries: 19:1
Nov 6 12:02:58 zeppelin kernel: QOUTFIFO entries:
Nov 6 12:02:58 zeppelin kernel: Sequencer Free SCB List: 4 2 29 10 11 1 16 5 26 18 25 28 7 21 31 0 20 6 22 15 30 17 12 27 23 8 13 24 9 14
Nov 6 12:02:58 zeppelin kernel: Sequencer SCB Info:
Nov 6 12:02:58 zeppelin kernel: 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 2 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 3 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x37]
Nov 6 12:02:58 zeppelin kernel: 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 16 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 17 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:58 zeppelin kernel: 18 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 19 SCB_CONTROL[0x64] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x1]
Nov 6 12:02:59 zeppelin kernel: 20 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 21 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 22 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 23 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 24 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 25 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 26 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 27 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 28 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 29 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 30 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 31 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: Pending list:
Nov 6 12:02:59 zeppelin kernel: 55 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:02:59 zeppelin kernel: 1 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:02:59 zeppelin kernel: Kernel Free SCB list: 23 63 40 59 60 58 51 49 33 3 38 64 47 45 19 43 13 32 0 31 44 28 20 54 53 18 16 4 17 5 61 9 30 11 10 24 36 2 7 8 39 46 57 35 26 15 25 41 37 27 50 12 29
42 62 56 6 48 21 14 22 34
Nov 6 12:02:59 zeppelin kernel: DevQ(0:0:0): 0 waiting
Nov 6 12:02:59 zeppelin kernel: DevQ(0:1:0): 0 waiting
Nov 6 12:02:59 zeppelin kernel:
Nov 6 12:02:59 zeppelin kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Nov 6 12:02:59 zeppelin kernel: scsi0:0:0:0: Unable to deliver message
Nov 6 12:02:59 zeppelin kernel: aic7xxx_abort returns 0x2003
Nov 6 12:02:59 zeppelin kernel: scsi0:0:0:0: Attempting to queue an ABORT message
Nov 6 12:02:59 zeppelin kernel: CDB: 0x2a 0x0 0x0 0x13 0x13 0xc8 0x0 0x0 0x28 0x0
Nov 6 12:02:59 zeppelin kernel: scsi0: At time of recovery, card was not paused
Nov 6 12:02:59 zeppelin kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Nov 6 12:02:59 zeppelin kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x16b
Nov 6 12:02:59 zeppelin kernel: Card was paused
Nov 6 12:02:59 zeppelin kernel: ACCUM = 0x37, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0xd
Nov 6 12:02:59 zeppelin kernel: HCNT = 0x0 SCBPTR = 0x3
Nov 6 12:02:59 zeppelin kernel: SCSIPHASE[0x0] SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0x0]
Nov 6 12:02:59 zeppelin kernel: LASTPHASE[0x1] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0xc2]
Nov 6 12:02:59 zeppelin kernel: SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x0]
Nov 6 12:02:59 zeppelin kernel: SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
Nov 6 12:02:59 zeppelin kernel: SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
Nov 6 12:02:59 zeppelin kernel: STACK: 0x34 0xe1 0x0 0x178
Nov 6 12:02:59 zeppelin kernel: SCB count = 65
Nov 6 12:02:59 zeppelin kernel: Kernel NEXTQSCB = 52
Nov 6 12:02:59 zeppelin kernel: Card NEXTQSCB = 52
Nov 6 12:02:59 zeppelin kernel: QINFIFO entries:
Nov 6 12:02:59 zeppelin kernel: Waiting Queue entries:
Nov 6 12:02:59 zeppelin kernel: Disconnected Queue entries: 19:1
Nov 6 12:02:59 zeppelin kernel: QOUTFIFO entries:
Nov 6 12:02:59 zeppelin kernel: Sequencer Free SCB List: 4 2 29 10 11 1 16 5 26 18 25 28 7 21 31 0 20 6 22 15 30 17 12 27 23 8 13 24 9 14
Nov 6 12:02:59 zeppelin kernel: Sequencer SCB Info:
Nov 6 12:02:59 zeppelin kernel: 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 2 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 3 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x37]
Nov 6 12:02:59 zeppelin kernel: 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:02:59 zeppelin kernel: 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 16 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 17 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 18 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 19 SCB_CONTROL[0x64] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x1]
Nov 6 12:03:00 zeppelin kernel: 20 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 21 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 22 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 23 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 24 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 25 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 26 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 27 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 28 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 29 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 30 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: 31 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:00 zeppelin kernel: Pending list:
Nov 6 12:03:00 zeppelin kernel: 55 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:03:00 zeppelin kernel: 1 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:03:00 zeppelin kernel: Kernel Free SCB list: 23 63 40 59 60 58 51 49 33 3 38 64 47 45 19 43 13 32 0 31 44 28 20 54 53 18 16 4 17 5 61 9 30 11 10 24 36 2 7 8 39 46 57 35 26 15 25 41 37 27 50 12 29
42 62 56 6 48 21 14 22 34
Nov 6 12:03:00 zeppelin kernel: DevQ(0:0:0): 0 waiting
Nov 6 12:03:00 zeppelin kernel: DevQ(0:1:0): 0 waiting
Nov 6 12:03:00 zeppelin kernel:
Nov 6 12:03:00 zeppelin kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Nov 6 12:03:00 zeppelin kernel: (scsi0:A:0:0): Device is disconnected, re-queuing SCB
Nov 6 12:03:00 zeppelin kernel: Recovery code sleeping
Nov 6 12:03:03 zeppelin kernel: Recovery code awake
Nov 6 12:03:03 zeppelin kernel: Timer Expired
Nov 6 12:03:03 zeppelin kernel: aic7xxx_abort returns 0x2003
Nov 6 12:03:03 zeppelin kernel: scsi0:0:0:0: Attempting to queue a TARGET RESET message
Nov 6 12:03:03 zeppelin kernel: CDB: 0x4d 0x0 0x47 0x0 0x0 0x0 0x0 0x0 0x4 0x0
Nov 6 12:03:03 zeppelin kernel: scsi0: At time of recovery, card was not paused
Nov 6 12:03:03 zeppelin kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Nov 6 12:03:03 zeppelin kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x16b
Nov 6 12:03:03 zeppelin kernel: Card was paused
Nov 6 12:03:03 zeppelin kernel: ACCUM = 0x37, SINDEX = 0x48, DINDEX = 0xe4, ARG_2 = 0xd
Nov 6 12:03:03 zeppelin kernel: HCNT = 0x0 SCBPTR = 0x3
Nov 6 12:03:03 zeppelin kernel: SCSIPHASE[0x0] SCSISIGI[0x14] ERROR[0x0] SCSIBUSL[0x0]
Nov 6 12:03:03 zeppelin kernel: LASTPHASE[0x1] SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0xc2]
Nov 6 12:03:03 zeppelin kernel: SEQCTL[0x10] SEQ_FLAGS[0x40] SSTAT0[0x0] SSTAT1[0x0]
Nov 6 12:03:03 zeppelin kernel: SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac]
Nov 6 12:03:03 zeppelin kernel: SXFRCTL0[0x88] DFCNTRL[0x0] DFSTATUS[0x89]
Nov 6 12:03:03 zeppelin kernel: STACK: 0x34 0xe1 0x0 0x178
Nov 6 12:03:03 zeppelin kernel: SCB count = 65
Nov 6 12:03:03 zeppelin kernel: Kernel NEXTQSCB = 52
Nov 6 12:03:03 zeppelin kernel: Card NEXTQSCB = 1
Nov 6 12:03:03 zeppelin kernel: QINFIFO entries: 1
Nov 6 12:03:03 zeppelin kernel: Waiting Queue entries:
Nov 6 12:03:03 zeppelin kernel: Disconnected Queue entries:
Nov 6 12:03:03 zeppelin kernel: QOUTFIFO entries:
Nov 6 12:03:03 zeppelin kernel: Sequencer Free SCB List: 19 4 2 29 10 11 1 16 5 26 18 25 28 7 21 31 0 20 6 22 15 30 17 12 27 23 8 13 24 9 14
Nov 6 12:03:03 zeppelin kernel: Sequencer SCB Info:
Nov 6 12:03:03 zeppelin kernel: 0 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 1 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 2 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 3 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0x37]
Nov 6 12:03:03 zeppelin kernel: 4 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 5 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 6 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 7 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 8 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 9 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 10 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 11 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 12 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 13 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:03 zeppelin kernel: 14 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 15 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 16 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 17 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 18 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 19 SCB_CONTROL[0x0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 20 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 21 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 22 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 23 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 24 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 25 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 26 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 27 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 28 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 29 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 30 SCB_CONTROL[0xe0] SCB_SCSIID[0x8] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: 31 SCB_CONTROL[0xe0] SCB_SCSIID[0x18] SCB_LUN[0x0] SCB_TAG[0xff]
Nov 6 12:03:04 zeppelin kernel: Pending list:
Nov 6 12:03:04 zeppelin kernel: 55 SCB_CONTROL[0x60] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:03:04 zeppelin kernel: 1 SCB_CONTROL[0x74] SCB_SCSIID[0x8] SCB_LUN[0x0]
Nov 6 12:03:04 zeppelin kernel: Kernel Free SCB list: 23 63 40 59 60 58 51 49 33 3 38 64 47 45 19 43 13 32 0 31 44 28 20 54 53 18 16 4 17 5 61 9 30 11 10 24 36 2 7 8 39 46 57 35 26 15 25 41 37 27 50 12 29
42 62 56 6 48 21 14 22 34
Nov 6 12:03:04 zeppelin kernel: DevQ(0:0:0): 0 waiting
Nov 6 12:03:04 zeppelin kernel: DevQ(0:1:0): 0 waiting
Nov 6 12:03:04 zeppelin kernel:
Nov 6 12:03:04 zeppelin kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
Nov 6 12:03:04 zeppelin kernel: scsi0:0:0:0: Unable to deliver message
Nov 6 12:03:04 zeppelin kernel: aic7xxx_dev_reset returns 0x2003
Nov 6 12:03:04 zeppelin kernel: Recovery SCB completes
Nov 6 12:03:08 zeppelin kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
Nov 6 12:03:08 zeppelin kernel: scsi: device set offline - not ready or command retry failed after bus reset: host 0 channel 0 id 0 lun 0
Nov 6 12:03:08 zeppelin kernel: I/O error: dev 08:02, sector 20709904
[...]
I tested smartctl-5.33 on several other SCSI disks with the same
Linux-2.4.28rc1 kernel version (and also some other Linux kernel
versions, including older 2.2 and 2.4 kernels) without problems:
IBM IC35L036UCDY10-0 (4 different devices)
IBM DPSS-309170N
IBM DDYS-T18350N
IBM DDYS-T09170M (4 different devices)
IBM DDYS-T36950M
IBM DDYS-T18350M (3 different devices)
QUANTUM ATLAS10K3_18_SCA
COMPAQ BF03685A35 (3 different devices)
IBM DDYS-T36950N
The last disk on this list (IBM DDYS-T36950N) is on the
same machine and the same controller as one of the problematic
IBM IC35L073UCDY10-0 ("system "zeppelin"), but shows no problems
with smartctl-5.33!
I also tested with several IDE disks I have available here and also
did not find any problem with these. Also with smartmontools-5.27 I
never saw this kind of failure, even with the now problematic IBM
IC35L073UCDY10-0 drives!
To me this looks very much like smartctl-5.33 issues some SCSI command
the IBM IC35L073UCDY10-0 drive does not understand and which results
in SCSI errors.
Those errors are bad, though, as the drive goes offline after that.
(all drives I have tested are in some sort of Software-RAID, so I
could hot-remove and hot-add the disks and that way recover from
the error without reboot - many thanks to Neil Brown and his "mdadm"
tool! ;-))
HTH. If you need any more information please let me know.
- - andreas
- --
Andreas Haumer | mailto:andreas@...
*x Software + Systeme | http://www.xss.co.at/
Karmarschgasse 51/2/20 | Tel: +43-1-6060114-0
A-1100 Vienna, Austria | Fax: +43-1-6060114-71
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFBjMmpxJmyeGcXPhERAhjWAKCDLxNtpXQIcD8DKpPM+Q6/Bk5o9gCeN51A
96m+9QcnGKR54FaQE27eYU4=
=m5R/
-----END PGP SIGNATURE-----
|
Thread View
| Thread | Author | Date |
|---|---|---|
| [smartmontools-support]smartmontools-5.33: problem with IBM IC35L073UCDY10-0 disks? | Andreas Haumer <andreas@xs...> |