Gaspar, Alessio (USF Lakeland) schrieb:
> I've been toying with the following for a couple of days now without
> much success.
> Here's the config:
> - colinux 2.6.11-co-0.6.3
> - Debian-3.0r2.ext3-mit-backports.1gb image
> - xp pro version 2002 sp2 host
> The networking is done through a TAP-win32 adapter v8 which gets a
> shared internet connection from a wireless lan Dell Wireless 1450 Dual
> Band WLAN Mini-PCI Card.
> The Tap adapter configuration is:
> - ip = 192.168.0.1
> - subnet mask = 255.255.255.0
> - default gateway = 192.168.0.1
> - no DNS specified was specified, I added the 2 ones used by my isp
For TAP should not set a gateway and no DNS.
But TAP need a TCP forward or NAT to your internet connection. I never
uses ISC, perhaps it do this for you.
> on the colinux side:
> - eth0 is 192.168.0.40
> - broadcast 192.168.0.255
> - mask 255.255.255.0
> - /etc/resolv.conf containts a nameserver line with the IP of my isp dns
You need a default route from linux to windows. In Linux you must set
the ipaddress of windows side as gateway. For sample type this inside
route add default gw 192.168.0.1
An other option is to use the SLiRP as network (instand TAP). Then you
not need ISC, no roting problems, no firewall problems. SLiRP is not
fast, but works. See "2.3. The CoLinux Slirp (User Mode) driver" and
section "Debian interface setup for static SLiRP" in the wiki: