CEDET

Hi,

I am using eieio, semantic and speedbar from the cvs repository.  When I 
try to expand the node corresponding to a .ltx file in the speedbar, I 
get the following error.

eieio-generic-call: No method definition: semanticdb-create-database, 
("/home/venku/publications/icse03/.semantic.cache")

However, I donot get that error if I use semantic-1.4.1 instead of 
semantic from CVS (the rest of the set up is left as it is).

What might be wrong?

waiting for reply,


-- 

Venkatesh Prasad Ranganath,
Dept. Computing and Information Science,
Kansas State University, US.
web: http://www.cis.ksu.edu/~rvprasad

>>> Venkatesh Prasad Ranganath <rvprasad@...> seems to think that:
>
>
>Hi,
>
>I am using eieio, semantic and speedbar from the cvs repository.  When I 
>try to expand the node corresponding to a .ltx file in the speedbar, I 
>get the following error.
>
>eieio-generic-call: No method definition: semanticdb-create-database, 
>("/home/venku/publications/icse03/.semantic.cache")
>
>However, I donot get that error if I use semantic-1.4.1 instead of 
>semantic from CVS (the rest of the set up is left as it is).
  [ ... ]

Hi,

  Semantic 2.0's file format for the cache files is different from
  semantic 1.4.  Perhaps you can just delete the cache files to make
  it work?

  If not, it may be that the require or auto-loads don't work quite
  right yet.  Semanticdb used to be one file, now it consists of 7 or
  so.  I just tried it on a few local latex files I have, and it
  works for me.

  Try using `M-x toggle-debug-on-error', and getting a stack trace.
  That will help.

Thanks
Eric

-- 
          Eric Ludlam:                 zappo@..., eric@...
   Home: http://www.ludlam.net            Siege: http://www.siege-engine.com
Emacs: http://cedet.sourceforge.net               GNU: http://www.gnu.org

>>>>> "Eric" == Eric M Ludlam <eric@...> writes:

    >> I am using eieio, semantic and speedbar from the cvs repository.  When I 
    >> try to expand the node corresponding to a .ltx file in the speedbar, I 
    >> get the following error.
    >> 
    >> eieio-generic-call: No method definition: semanticdb-create-database, 
    >> ("/home/venku/publications/icse03/.semantic.cache")
    >> 
    >> However, I donot get that error if I use semantic-1.4.1 instead of 
    >> semantic from CVS (the rest of the set up is left as it is).
    >   [ ... ]

    >   If not, it may be that the require or auto-loads don't work quite
    >   right yet.  Semanticdb used to be one file, now it consists of 7 or
    >   so.  I just tried it on a few local latex files I have, and it
    >   works for me.

    >   Try using `M-x toggle-debug-on-error', and getting a stack trace.
    >   That will help.

Well, deleting the cache files did not help.  Also, following is the stack trace of the error. 

I am loading xae after semantic and it comes with a prebundled version of eieio.  Could that be...?

Debugger entered--Lisp error: (no-method-definition semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
  signal(no-method-definition (semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache")))
  eieio-generic-call(semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
  semanticdb-create-database("/home/venku/publications/icse03/.semantic.cache")
  semanticdb-get-database("/home/venku/publications/icse03/.semantic.cache")
  semanticdb-file-stream("/home/venku/publications/icse03/cadena.tex")
  semantic-fetch-dynamic-bovine("/home/venku/publications/icse03/cadena.tex")
  speedbar-fetch-dynamic-tags("/home/venku/publications/icse03/cadena.tex")
  speedbar-tag-file("[+]" "cadena.tex" 2)
  speedbar-do-function-pointer()
  speedbar-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
  dframe-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
  call-interactively(dframe-click)
-- 

Venkatesh Prasad Ranganath,
Dept. Computing and Information Science,
Kansas State University, US.
web: http://www.cis.ksu.edu/~rvprasad

He's like a function -- he returns a value, in the form of his opinion.
It's up to you to cast it into a void or not.
		-- Phil Lapsley

>>>>> "Eric" == Eric M Ludlam <eric@...> writes:

    >> I am using eieio, semantic and speedbar from the cvs repository.  When I 
    >> try to expand the node corresponding to a .ltx file in the speedbar, I 
    >> get the following error.
    >> 
    >> eieio-generic-call: No method definition: semanticdb-create-database, 
    >> ("/home/venku/publications/icse03/.semantic.cache")
    >> 
    >> However, I donot get that error if I use semantic-1.4.1 instead of 
    >> semantic from CVS (the rest of the set up is left as it is).
    >   [ ... ]

    > Hi,

    >   Semantic 2.0's file format for the cache files is different from
    >   semantic 1.4.  Perhaps you can just delete the cache files to make
    >   it work?

    >   If not, it may be that the require or auto-loads don't work quite
    >   right yet.  Semanticdb used to be one file, now it consists of 7 or
    >   so.  I just tried it on a few local latex files I have, and it
    >   works for me.

    >   Try using `M-x toggle-debug-on-error', and getting a stack trace.
    >   That will help.

Well figured what the problem was.  The problem happens only if I set semanticdb-global-mode to true. 
I thought it might be a bug, hence, this mail.

Thanks for the expedite reply,

-- 

Venkatesh Prasad Ranganath,
Dept. Computing and Information Science,
Kansas State University, US.
web: http://www.cis.ksu.edu/~rvprasad

Tax reform means "Don't tax you, don't tax me, tax that fellow behind
the tree."
		-- Russell Long

>>> Venkatesh Prasad Ranganath <rvprasad@...> seems to think that:
>>>>>> "Eric" == Eric M Ludlam <eric@...> writes:
>
>    >> I am using eieio, semantic and speedbar from the cvs repository.  When I 
>    >> try to expand the node corresponding to a .ltx file in the speedbar, I 
>    >> get the following error.
>    >> 
>    >> eieio-generic-call: No method definition: semanticdb-create-database, 
>    >> ("/home/venku/publications/icse03/.semantic.cache")
>    >> 
>    >> However, I donot get that error if I use semantic-1.4.1 instead of 
>    >> semantic from CVS (the rest of the set up is left as it is).
>    >   [ ... ]
>
>    >   If not, it may be that the require or auto-loads don't work quite
>    >   right yet.  Semanticdb used to be one file, now it consists of 7 or
>    >   so.  I just tried it on a few local latex files I have, and it
>    >   works for me.
>
>    >   Try using `M-x toggle-debug-on-error', and getting a stack trace.
>    >   That will help.
>
>Well, deleting the cache files did not help.  Also, following is the stack trace of the error. 
>
>I am loading xae after semantic and it comes with a prebundled version of eieio.  Could that be...?
>
>Debugger entered--Lisp error: (no-method-definition semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
>  signal(no-method-definition (semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache")))
>  eieio-generic-call(semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
>  semanticdb-create-database("/home/venku/publications/icse03/.semantic.cache")
>  semanticdb-get-database("/home/venku/publications/icse03/.semantic.cache")
>  semanticdb-file-stream("/home/venku/publications/icse03/cadena.tex")
>  semantic-fetch-dynamic-bovine("/home/venku/publications/icse03/cadena.tex")
>  speedbar-fetch-dynamic-tags("/home/venku/publications/icse03/cadena.tex")
>  speedbar-tag-file("[+]" "cadena.tex" 2)
>  speedbar-do-function-pointer()
>  speedbar-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
>  dframe-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
>  call-interactively(dframe-click)

This is indeed curious.  If you were to find-file a latex file in
that directory before using speedbar to open it, does that still
cause the problem?

>>> Venkatesh Prasad Ranganath <rvprasad@...> seems to think that:
  [ ... ]
>Well figured what the problem was.  The problem happens only if I set semanticdb-global-mode to true. 
>I thought it might be a bug, hence, this mail.
>
>Thanks for the expedite reply,

Semanticdb is an important part of what makes things work quickly.
While this may temporarily make things work, using semanticdb will
save time later.

Eric

-- 
          Eric Ludlam:                 zappo@..., eric@...
   Home: http://www.ludlam.net            Siege: http://www.siege-engine.com
Emacs: http://cedet.sourceforge.net               GNU: http://www.gnu.org

>>>>> "Eric" == Eric M Ludlam <eric@...> writes:

    >>>> Venkatesh Prasad Ranganath <rvprasad@...> seems to think that:
    >>>>>>> "Eric" == Eric M Ludlam <eric@...> writes:
    >> 
    >> >> I am using eieio, semantic and speedbar from the cvs repository.  When I 
    >> >> try to expand the node corresponding to a .ltx file in the speedbar, I 
    >> >> get the following error.
    >> >> 
    >> >> eieio-generic-call: No method definition: semanticdb-create-database, 
    >> >> ("/home/venku/publications/icse03/.semantic.cache")
    >> >> 
    >> >> However, I donot get that error if I use semantic-1.4.1 instead of 
    >> >> semantic from CVS (the rest of the set up is left as it is).
    >> >   [ ... ]
    >> 
    >> >   If not, it may be that the require or auto-loads don't work quite
    >> >   right yet.  Semanticdb used to be one file, now it consists of 7 or
    >> >   so.  I just tried it on a few local latex files I have, and it
    >> >   works for me.
    >> 
    >> >   Try using `M-x toggle-debug-on-error', and getting a stack trace.
    >> >   That will help.
    >> 
    >> Well, deleting the cache files did not help.  Also, following is the stack trace of the error. 
    >> 
    >> I am loading xae after semantic and it comes with a prebundled version of eieio.  Could that be...?
    >> 
    >> Debugger entered--Lisp error: (no-method-definition semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
    >> signal(no-method-definition (semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache")))
    >> eieio-generic-call(semanticdb-create-database ("/home/venku/publications/icse03/.semantic.cache"))
    >> semanticdb-create-database("/home/venku/publications/icse03/.semantic.cache")
    >> semanticdb-get-database("/home/venku/publications/icse03/.semantic.cache")
    >> semanticdb-file-stream("/home/venku/publications/icse03/cadena.tex")
    >> semantic-fetch-dynamic-bovine("/home/venku/publications/icse03/cadena.tex")
    >> speedbar-fetch-dynamic-tags("/home/venku/publications/icse03/cadena.tex")
    >> speedbar-tag-file("[+]" "cadena.tex" 2)
    >> speedbar-do-function-pointer()
    >> speedbar-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
    >> dframe-click((mouse-2 (#<window 6 on  SPEEDBAR> 281 (18 . 260) 100149771)))
    >> call-interactively(dframe-click)

    > This is indeed curious.  If you were to find-file a latex file in
    > that directory before using speedbar to open it, does that still
    > cause the problem?

Well, it still does cause the problem.      

    >>>> Venkatesh Prasad Ranganath <rvprasad@...> seems to think that:
    >   [ ... ]
    >> Well figured what the problem was.  The problem happens only if I set semanticdb-global-mode to true. 
    >> I thought it might be a bug, hence, this mail.
    >> 
    >> Thanks for the expedite reply,

    > Semanticdb is an important part of what makes things work quickly.
    > While this may temporarily make things work, using semanticdb will
    > save time later.

    > Eric

    > -- 
    >           Eric Ludlam:                 zappo@..., eric@...
    >    Home: http://www.ludlam.net            Siege: http://www.siege-engine.com
    > Emacs: http://cedet.sourceforge.net               GNU: http://www.gnu.org


-- 

Venkatesh Prasad Ranganath,
Dept. Computing and Information Science,
Kansas State University, US.
web: http://www.cis.ksu.edu/~rvprasad