Теневод Ужасный wrote:
> I'm about to configure a RAID1 on a Marvell 91xx Controller (Board:
> Gigabyte Z68X-UD4-B3) and try to establish some kind of health status
> and temperature monitoring based on smartctl running on Win7 x64.
> smartctl -i /dev/sda gives me information about the Marvell VD with no
> SMART capability.. OK.
This is as expected.
> I found out that -d sat,12 option gives me access to the SMART of the
> physical drive(s),
Interesting. This is the first report of a Windows (S)ATA controller
driver which supports SAT.
Please provide a sample smartctl -x output.
Does -d sat[,16] work?
> but here is a problem regardless of what I type in to
> identify the device (/dev/sda- dev/sda,0 - dev/sda,1 or even
> /dev/sda,10) i only get the information for the disk on physical port 0
> and have no chance to get to the second one.
The notation /dev/sdX,PORT is only supported for 3ware controllers.
> Isthere a possibility to get through to the second drive, or is it
> planned to implement support for this controller?
I'm not aware of functionality to address physical drives via this
controller's Windows driver.
Please check whether CSMI is implemented:
smartctl -r ioctl,2 -d csmi --scan