From: Pepe p. <spl...@gm...> - 2012-04-24 16:35:55
|
hi everyone im trying to make a saffire pro 24 dsp to work but with a lot of problems This is the step bby step what ive followed. http://subversion.ffado.org/wiki/Dependencies/Ubuntu and following this also http://www.ffado.org/?q=node/1204 <cite> I edited the saffire_pro24.cpp to modify the condition so it accepts the 0x10008 firmware, and it seems to work! I changed « if (tmp[0] != 0x00010004 ) » to « if (tmp[0] != 0x00010008 ) ». </cite> and... <cite> Hey, thanks for that clue. That did the trick for me. I have the dsp version, so in order to get the ffado-mixer working I edited the saffire_dice.py and changed line: if self.configrom.getModelName() == "SAFFIRE_PRO_24" to if self.configrom.getModelName() == "SAFFIRE_PRO_24DSP" </cite> Yesterday when i did it the interface was completly detected by ffado-diag but with no luck running jackd, telling me what is not compatible with libffado 2.999.0-2125M. today i dont know how libffado is not working again responding ffado-diag with <code> FFADO diagnostic utility 2.999.0-2125M ============================ (C) 2008 Pieter Palmers 2009-2010 Arnold Krille === CHECK === Base system... kernel version............ 3.2.0-23-generic old 1394 stack present.... False old 1394 stack loaded..... False old 1394 stack active..... False new 1394 stack present.... True new 1394 stack loaded..... True new 1394 stack active..... True /dev/raw1394 node present. False /dev/fw* permissions: crw------- 1 root root 250, 0 abr 24 17:07 /dev/fw0 crw------- 1 root root 250, 1 abr 24 17:51 /dev/fw1 User IDs: uid=1000(splashman) gid=1000(splashman) grupos=1000(splashman),4(adm),20(dialout),24(cdrom),29(audio),46(plugdev),105(lpadmin),119(admin),122(sambashare),1001(raw1394) Prerequisites (dynamic at run-time)... gcc ............... gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 g++ ............... g++ (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.1 for Qt version 4.8.1 jackd ............. sh: 1: jackd: not found path ............ flags ........... -ljack libraw1394 ........ 2.0.7 flags ........... -lraw1394 libavc1394 ........ 0.5.3 flags ........... -lavc1394 -lrom1394 -lraw1394 libiec61883 ....... 1.2.0 flags ........... -liec61883 -lraw1394 libxml++-2.6 ...... 2.34.1 flags ........... -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 dbus-1 ............ 1.4.18 flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 -lpthread -lrt Prerequisites (static at compile-time)... gcc ............... gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 g++ ............... g++ (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 PyQt4 (by pyuic4) . Python User Interface Compiler 4.9.1 for Qt version 4.8.1 jackd ............. sh: 1: jackd: not found path ............ flags ........... -ljack libraw1394 ........ 2.0.7 flags ........... -lraw1394 libavc1394 ........ 0.5.3 flags ........... -lavc1394 -lrom1394 -lraw1394 libiec61883 ....... 1.2.0 flags ........... -liec61883 -lraw1394 libxml++-2.6 ...... 2.34.1 flags ........... -I/usr/include/libxml2 -I/usr/include/glibmm-2.4 -I/usr/lib/x86_64-linux-gnu/glibmm-2.4/include -I/usr/include/sigc++-2.0 -I/usr/lib/x86_64-linux-gnu/sigc++-2.0/include -I/usr/include/glib-2.0 -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/libxml++-2.6 -I/usr/lib/libxml++-2.6/include -lxml++-2.6 -lxml2 -lglibmm-2.4 -lgobject-2.0 -lsigc-2.0 -lglib-2.0 dbus-1 ............ 1.4.18 flags ........... -I/usr/include/dbus-1.0 -I/usr/lib/x86_64-linux-gnu/dbus-1.0/include -ldbus-1 -lpthread -lrt Hardware... Host controllers: 01:07.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [11c1:5811] (rev 61) (prog-if 10 [OHCI]) Subsystem: Pinnacle Systems Inc. Device [11bd:000e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at efbff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci CPU info: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 2 On-line CPU(s) list: 0,1 Hilo(s) por núcleo: 1 Núcleo(s) por zócalo:2 Socket(s): 1 Nodo(s) NUMA: 1 ID del vendedor: GenuineIntel Familia de CPU: 6 Modelo: 15 Stepping: 13 CPU MHz: 1999.969 BogoMIPS: 3999.97 caché L1d: 32K caché L1i: 32K caché L2: 1024K NUMA node0 CPU(s): 0,1 Configuration... IRQ information Hardware Interrupts: -------------------- IRQ 0: PID: None, count: [65, 65], Sched None (priority None), drivers: ['timer'] IRQ 1: PID: None, count: [2292, 2292], Sched None (priority None), drivers: ['i8042'] IRQ 7: PID: None, count: [2, 2], Sched None (priority None), drivers: ['parport0'] IRQ 8: PID: None, count: [1, 1], Sched None (priority None), drivers: ['rtc0'] IRQ 9: PID: None, count: [0, 0], Sched None (priority None), drivers: ['acpi'] IRQ 12: PID: None, count: [197210, 197210], Sched None (priority None), drivers: ['i8042'] IRQ 14: PID: None, count: [30194, 30194], Sched None (priority None), drivers: ['pata_amd'] IRQ 15: PID: None, count: [0, 0], Sched None (priority None), drivers: ['pata_amd'] IRQ 19: PID: None, count: [168, 168], Sched None (priority None), drivers: ['firewire_ohci'] IRQ 21: PID: None, count: [4463, 4463], Sched None (priority None), drivers: ['ahci'] IRQ 22: PID: None, count: [935719, 935719], Sched None (priority None), drivers: ['ehci_hcd:usb1'] IRQ 23: PID: None, count: [228736, 228736], Sched None (priority None), drivers: ['ohci_hcd:usb2', 'nvidia'] IRQ 43: PID: None, count: [0, 0], Sched None (priority None), drivers: ['eth0'] Software Interrupts: -------------------- === REPORT === FireWire kernel drivers: The new FireWire kernel stack is loaded. If running a kernel earlier than 2.6.37 and problems are experienced, either try with the old Firewire kernel stack or upgrade to a newer kernel (preferrably 2.6.37 or later). </code> |