gramps

Email Archive: gramps-devel (read-only)

[Gramps-devel] Compil needed packets install

From: Alain AUPEIX <alain.aupeix@wa...> - 2011-01-26 23:13

Hi, I want to install all the paquets and the source under ubuntu 10.10.

Using the list on the documentation page, I begin to install.

I first install this:

sudo apt-get install intltool
sudo apt-get install python2.6-dev
sudo apt-get install python-cairo-dev
sudo apt-get install libtiff4-dev
sudo apt-get install libxcomposite-dev

no problem, then this (configure + make + make install) :

libffi-3.0.9
pango-1.28.3
pygobject-2.21.3
atk-1.32.0
glib-2.26.0
pygtk-2.22.0
gdk-pixbuf-2.21.7
gtk+-2.22.1

The first time I tried it, was under Ubuntu 9.10, and I don't search 
why, I install then 10.04 and don't try again.

I have tried under 10.10, a first time, and the problem was the same : 
after a boot, Applications and System submenus were now in english, and 
more ennoying, Computer and Network submenus of Shortcuts were also in 
english, but didn't work anymore. Trash in 'Tableau de bord' was hidden. 
As I didn't found the reason, I reinstall 10.10. After reinstall, I 
found about half a dozen of trash ...

I begin a new try, but less stupidly ( I kept the installs folder), and 
I test after these packets installed. The problems were already here, 
but I was now able to uninstall packet one by one.

In fact the responsive was: glib-2.26.0. I tried a previous version 
(2.25.17), but it was the same. As I have halready had these problems 
with older version og glib, I think there is perhaps some parameters to 
change to make it ok.

Does anybody had such problems ? and how did you solve it ?

I know it's not a gramps problem, but I really need it to use gramps.

Last question, there were some times, the version of django usable was 
1.0, I have download 1.2.4, and 1.3beta. Will these version work with 
gramps server ?

Thanks

A+

Thread View

Thread	Author	Date
[Gramps-devel] Compil needed packets install	Alain AUPEIX <alain.aupeix@wa...>

[Gramps-devel] Re : Compil needed packets install

From: jerome <romjerome@ya...> - 2011-01-27 08:32

Hi,

> I have tried under 10.10, a first time, and the problem was
> the same : 
> after a boot, Applications and System submenus were now in
> english, and 
> more ennoying, Computer and Network submenus of Shortcuts
> were also in 
> english, but didn't work anymore.

I get the same problem after installing via Live CD.
Some translations files were missing, so I just downloaded and installed them: 
http://www.gramps-project.org/wiki/index.php?title=Linux_Genealogy_CD/fr#Traductions

> In fact the responsive was: glib-2.26.0. I tried a previous
> version 
> (2.25.17), but it was the same. As I have halready had
> these problems 
> with older version og glib, I think there is perhaps some
> parameters to 
> change to make it ok.

I also get a trash issue (ie. to retrieve data from trash), but it seems to be related to the synchronisation (new method).
http://gramps.1791082.n4.nabble.com/First-impressions-after-installing-Linux-Genealogy-6-1-td3072477.html 

I added some additional packages:
geany, intltool, automake, autotool, m4, pylint, gtranslator, poedit, django, xdg-utils, rcs, pyenchant, etc ...
+ removed OpenOffice and added LibreOffice.

If glib is unstable, you should try an other desktop session!
In the past, I often switched from GNOME to Xfce while the first one was not fully well configured: I removed my gnome profile, update files, configurations from a Xfce session! To compile Gnome files from a Gnome session sounds like to compile a X files with a graphical server active...

Note, Ubuntu is maybe not the optimized distribution for making his own packages! It already provides a lot packages ready for use.


Jérôme



--- En date de : Mer 26.1.11, Alain AUPEIX <alain.aupeix@...> a écrit :

> De: Alain AUPEIX <alain.aupeix@...>
> Objet: [Gramps-devel] Compil needed packets install
> À: "Gramps Development List" <gramps-devel@...>
> Date: Mercredi 26 janvier 2011, 19h13
> Hi, I want to install all the paquets
> and the source under ubuntu 10.10.
> 
> Using the list on the documentation page, I begin to
> install.
> 
> I first install this:
> 
> sudo apt-get install intltool
> sudo apt-get install python2.6-dev
> sudo apt-get install python-cairo-dev
> sudo apt-get install libtiff4-dev
> sudo apt-get install libxcomposite-dev
> 
> no problem, then this (configure + make + make install) :
> 
> libffi-3.0.9
> pango-1.28.3
> pygobject-2.21.3
> atk-1.32.0
> glib-2.26.0
> pygtk-2.22.0
> gdk-pixbuf-2.21.7
> gtk+-2.22.1
> 
> The first time I tried it, was under Ubuntu 9.10, and I
> don't search 
> why, I install then 10.04 and don't try again.
> 
> I have tried under 10.10, a first time, and the problem was
> the same : 
> after a boot, Applications and System submenus were now in
> english, and 
> more ennoying, Computer and Network submenus of Shortcuts
> were also in 
> english, but didn't work anymore. Trash in 'Tableau de
> bord' was hidden. 
> As I didn't found the reason, I reinstall 10.10. After
> reinstall, I 
> found about half a dozen of trash ...
> 
> I begin a new try, but less stupidly ( I kept the installs
> folder), and 
> I test after these packets installed. The problems were
> already here, 
> but I was now able to uninstall packet one by one.
> 
> In fact the responsive was: glib-2.26.0. I tried a previous
> version 
> (2.25.17), but it was the same. As I have halready had
> these problems 
> with older version og glib, I think there is perhaps some
> parameters to 
> change to make it ok.
> 
> Does anybody had such problems ? and how did you solve it
> ?
> 
> I know it's not a gramps problem, but I really need it to
> use gramps.
> 
> Last question, there were some times, the version of django
> usable was 
> 1.0, I have download 1.2.4, and 1.3beta. Will these version
> work with 
> gramps server ?
> 
> Thanks
> 
> A+
> 
> 
> 
> ------------------------------------------------------------------------------
> Special Offer-- Download ArcSight Logger for FREE (a $49
> USD value)!
> Finally, a world-class log management solution at an even
> better price-free!
> Download using promo code Free_Logger_4_Dev2Dev. Offer
> expires 
> February 28th, so secure your free ArcSight Logger TODAY! 
> http://p.sf.net/sfu/arcsight-sfd2d
> _______________________________________________
> Gramps-devel mailing list
> Gramps-devel@...
> https://lists.sourceforge.net/lists/listinfo/gramps-devel
>

Re: [Gramps-devel] Compil needed packets install

From: Benny Malengier <benny.malengier@gm...> - 2011-01-27 10:39

Attachments: Message as HTML

Alain,

I do not see the relation with Gramps.
Gramps does not need compilation, it is written in a scripting language.

If you use Ubuntu, and you start to compile and install some of the core
packages (glib, ...), then it is normal that you get problems if you are not
a very experienced programmer / packager.

For easy Gramps in Ubuntu, do:
sudo apt-get install gramps
then obtain the source code from sourcefore of the latest version, and do:

./autogen.sh
make

Install dev packages autogen complains about as needed with the package
manager.
Then the latest version can be run with the comman:

python src/gramps.py

Benny

2011/1/26 Alain AUPEIX <alain.aupeix@...>

> Hi, I want to install all the paquets and the source under ubuntu 10.10.
>
> Using the list on the documentation page, I begin to install.
>
> I first install this:
>
> sudo apt-get install intltool
> sudo apt-get install python2.6-dev
> sudo apt-get install python-cairo-dev
> sudo apt-get install libtiff4-dev
> sudo apt-get install libxcomposite-dev
>
> no problem, then this (configure + make + make install) :
>
> libffi-3.0.9
> pango-1.28.3
> pygobject-2.21.3
> atk-1.32.0
> glib-2.26.0
> pygtk-2.22.0
> gdk-pixbuf-2.21.7
> gtk+-2.22.1
>
> The first time I tried it, was under Ubuntu 9.10, and I don't search
> why, I install then 10.04 and don't try again.
>
> I have tried under 10.10, a first time, and the problem was the same :
> after a boot, Applications and System submenus were now in english, and
> more ennoying, Computer and Network submenus of Shortcuts were also in
> english, but didn't work anymore. Trash in 'Tableau de bord' was hidden.
> As I didn't found the reason, I reinstall 10.10. After reinstall, I
> found about half a dozen of trash ...
>
> I begin a new try, but less stupidly ( I kept the installs folder), and
> I test after these packets installed. The problems were already here,
> but I was now able to uninstall packet one by one.
>
> In fact the responsive was: glib-2.26.0. I tried a previous version
> (2.25.17), but it was the same. As I have halready had these problems
> with older version og glib, I think there is perhaps some parameters to
> change to make it ok.
>
> Does anybody had such problems ? and how did you solve it ?
>
> I know it's not a gramps problem, but I really need it to use gramps.
>
> Last question, there were some times, the version of django usable was
> 1.0, I have download 1.2.4, and 1.3beta. Will these version work with
> gramps server ?
>
> Thanks
>
> A+
>
>
>
>
> ------------------------------------------------------------------------------
> Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)!
> Finally, a world-class log management solution at an even better
> price-free!
> Download using promo code Free_Logger_4_Dev2Dev. Offer expires
> February 28th, so secure your free ArcSight Logger TODAY!
> http://p.sf.net/sfu/arcsight-sfd2d
> _______________________________________________
> Gramps-devel mailing list
> Gramps-devel@...
> https://lists.sourceforge.net/lists/listinfo/gramps-devel
>