Basilisk II

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
check for egrep

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
Cygwin support. Only generate NATMEM_OFFSET definitions in Direct Addressing
mode. Merge sshpty.c support detection code from Basilisk II.

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
check for <fenv.h>

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
exp2f/log2f implementations if not existing

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
enable 64-bit NATMEM_OFFSET

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
take care when only compiling in SDL audio support with X11 graphics

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
native NetBSD/ppc support

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
MMX/SSE/SSE2 optimizations are now converted to full inline assembly code,
aka avoid use of (possibly broken) GCC intrinsics. Add some SSE2 optimizations.
Translate VSLDOI, MFVSCR, MTVSCR instructions. AltiVec Fractal Carbon now
shows more than 1 GFlops performance!

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
Enable build with gtk2 and default to that UI if found. Otherwise, it's
still possible to select GTK1 as --with-gtk=gtk1 or --with-gtk=gtk.

Update of /cvs/SheepShaver/src/Unix

Modified Files:
	configure.ac 
Log Message:
Enable VidMode extension by default though some Xservers may still be
broken. Probably run-time check for the right VidMode version? My tests
were done with X.org 6.8.2 (VidMode 2.2)

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
remove duplicate

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Support JIT on Mach/ppc platforms. Mach/i386 (Darwin/x86) is to follow.

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Apple GCC uses __ppc__ as the arch token

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Enable build of the JIT with GCC 2.9x compilers (e.g. "2.96" from MDK 8.1).

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Rework sheepshaver_cpu object allocation and get rid of POSIX'ish functions.

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Check for <stdint.h> ourselves + build with -mdynamic-no-pic on MacOS X.

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Tweaks to build slirp on MacOS X. Yeah, there is now ethernet there! ;-)

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Fix detection of GCC versions, avoid AC_EGREP_CPP (J.P. Larocque)

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Check for CoreFoundation framework, which is not available in Darwin.

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
force -finline-functions to get inlining really operating with gcc < 3.3.6
on x86 or you may get a _ZN9bit_fieldILi0ELi0EE7extractEj undefined symbol

Update of /cvs/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
don't grab in -mdynamic-no-pic when using icc, note that you need at least
version 9.0.25 (build 20050809) to have a working binary

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Remaining references to V2.2 changed (XXX needs to be factored out)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
The JIT works in Darwin/x86 too.

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Better IRIX support: add audio & slirp networking. Fix configure to use -lm
when searching for C99 functions (roundf() et al.).

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
JIT now works on IRIX/mips, you need GCC for the synthetic opcodes:
	CC=cc CXX=CC ./configure --with-dgcc=g++

Also merge MIPSPro optimization flags from Basilisk II tree.

Note that I only verified the emulator works through the testsuite
(all tests passed, including AltiVec emulation)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Look for g++ in /usr/freeware/bin (IRIX/mips for the JIT). Avoid false
positives in GCC detection, i.e. knowingly cause a syntax error if #error
was not good enough (MIPSpro CC). Fix dyngen g++ version detection if
main compiler is not g++

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
fix framework detection on OSX/intel with newer compiler that compiler that
fully obsoleted nested functions support (my fault anyway)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Don't mis-align the stack on x86 platforms (most visible on MacOS X for Intel)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Use FIONBIO only on pretty ancient systems.

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Check whether compiler supports byte bit-fields. If so, we can enable slirp
emulation code since it pure C+sockets code.

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
fix underquoted definitions

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Use -fno-align-functions to really disable function alignment (a value of 0
used the default alignment, e.g. 16 bytes on x86_64). This is purely cosmetics
and only helps reading the resulting disassembly.

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Remove obsolete code (HAVE_STATIC_DATA_EXEC).

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
fix configure.ac unix script to not fail when AM_PATH_GTK and AM_PATH_ESD
are not defined (such as is usually the case on Mac OS X)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Add mips cxmon files

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Add native audio support (without SDL) from Nigel's Basilisk II port to MacOS X.

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
support new prefs editor handling (rerun autogen)

Update of /home/cvs/cebix/SheepShaver/src/Unix by gbeauche

Modified Files:
	configure.ac 
Log Message:
Fix build with new MacOS X extfs implementation (in C++).

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
Restore OSX built-in prefs editor. Change the configure.ac check for
no_x to WANT_GTK=no since X may be installed when building on OS X,
but we probably don't want it!

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
[Amadeusz Slawinski]
These patches fix the issues with using newer versions of autoconf,
which led to generating broken configure script.

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
[Geoffrey Brown]

bin/cue support

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
[Geoffrey Brown]
VHD support

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
Add macro guards for config.h.

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
move NSAutoReleasePool_wrap() into its own file

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
[Steven Noonan] configure.ac: enable JIT on 64-bit Intel Mac

d4dc0c70b24dc5981e752403e8fe047637d712a1
From: Steven Noonan <steven@...>
Date: Wed, 1 Jun 2011 17:48:33 -0700
Subject: [PATCH] configure.ac: enable JIT on 64-bit Intel Mac

Signed-off-by: Steven Noonan <steven@...>

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
[Steven Noonan] configure.ac: fix TUN/TAP detection on Linux

28ff27fc3ae3878fe9ca589f3c55c4261814266a
From: Steven Noonan <steven@...>
Date: Wed, 1 Jun 2011 01:34:07 -0700
Subject: [PATCH] configure.ac: fix TUN/TAP detection on Linux

Signed-off-by: Steven Noonan <steven@...>

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
Dump PPC disassembly on crash

Update of /home/cvs/cebix/SheepShaver/src/Unix by asvitkine

Modified Files:
	configure.ac 
Log Message:
check for sys/stropts.h and stropts.h headers