Hi again. Please see my answers in red below.
1-147 Visteon Audio
Visteon Engineering Services Ltd.
1 Springfield Lyons Approach
Chelmsford, Essex CM2 5LB, UK
Tel: +44 1245 395258
e-mail: mcvetkov@... <mailto:mcvetkov@...>
CONFIDENTIALITY NOTICE: This e-mail message including attachments, if
any, is intended only for the person or entity to which it is addressed
and may contain confidential and /or privileged material. Any
unauthorized review, use, disclosure or distribution is prohibited. If
you are not the intended recipient, please contact the sender by reply
e-mail and destroy all copies of the original message. If you are the
intended recipient but do not wish to receive communications through
this medium, please so advise the sender immediately.
From: Stefan Jahn [mailto:stefan@...]
Sent: 06 May 2010 13:16
To: Cvetkovic, Milan (M.)
Subject: RE: [Qucs-help] QUCS problem/bug on new computer
Am Do, 6.05.2010, 14:04 schrieb Cvetkovic, Milan (M.):
> Hi Stefan,
> Thanks for getting back so quickly. I'm afraid it's not as simple as
> that. I did include the dc and ac simulation blocks in both
> I tried. Here are the files I copied over from the old laptop.
Hm. OK then. Here I was able to simulate it correctly. "Level" has
a bandpass characteristic around 100MHz, right?
>> That is correct.
Can you check the netlist (press F6 after trying to simulate), please?
>> The netlist dialog box "qucsedit" is empty.
So now I think, you have a permission problem or something. Can
you check your HOME and QUCSDIR environment variables, please?
>> How do I do this ?
Probably the netlist cannot be created, let's see...
>> Looks like you are right...
Best regards, Stefan.