David,
I upgraded the codestriker to 1.9.8. However, there is no hyperlink with the "Line number" next to "Parallel". I am clueless.
Gary
--- On Thu, 5/7/09, Gary Yang <garyyang6@...> wrote:
> From: Gary Yang <garyyang6@...>
> Subject: Re: [Codestriker-user] No new browser window opened up after clicked on the line number.
> To: "David Sitsky" <david.sitsky@...>
> Cc: codestriker-user@...
> Date: Thursday, May 7, 2009, 11:28 AM
>
> David,
>
> I am not talking about the line numbers used to add
> comments. It works fine. I am talking about the Line number
> next to the "Parallel".
>
> At the Codestriker Guide, 3.5.3 Viewing Complete old/new
> Files. It syas:
>
> As mention in Section 3.5.1, it is possible to view the
> entire contents of a file in a review in its original form,
> or in its proposed form, or side-by-side depending on
> whether the "Line" or "Parallel" link was selected.
> ......
> When a "Line" link is clicked, a new browser window will
> come up with the contents of the file.
>
>
> I am able to click on the Parallel. It pops up a new
> browser to show me both original and changed revision.
> However, the Line number next to the Parallel there is no
> hyperlink with it. Nothing poped up after I clicked on it.
> Can you please tell me how to fix it?
>
> Thanks.
>
>
>
> --- On Wed, 5/6/09, David Sitsky <david.sitsky@...>
> wrote:
>
> > From: David Sitsky <david.sitsky@...>
> > Subject: Re: No new browser window opened up after
> clicked on the line number.
> > To: "Gary Yang" <garyyang6@...>
> > Cc: codestriker-user@...
> > Date: Wednesday, May 6, 2009, 5:45 PM
> > The more recent versions of
> > Codestriker removed the explicit
> > underlines form the line numbers. If you click on
> > them, a little
> > inline popup window should appear, allowing you to
> enter a
> > comment.
> >
> > If this is not happening, make sure you are at least
> using
> > 1.9.8.
> > Also try it with firefox, to make sure its not a
> browser
> > issue.
> >
> > On Thu, May 7, 2009 at 10:00 AM, Gary Yang <garyyang6@...>
> > wrote:
> > >
> > >
> > > Hi David,
> > >
> > > I do not understand your explaination. From my
> > understanding, the diff text matches the depot path.
> There
> > is a hyperlinked parallel line. A window popped up
> after I
> > clicked on the Paraelle. It shows two differen
> revisons of
> > the file. I tried it again. Still, there is no
> hyperlink
> > with the line number. Below is the detail.
> > >
> > >
> > > in codestriker.conf:
> > >
> > > 'perforce:apache:apache1234@...',
> > >
> > > The Perforce client workspace spec:
> > > p4 client -o
> > > View:
> > > //training/...
> > //gary_pc_training/training/...
> > >
> > >
> > > p4 diff -du
> > > ==== //training/main.c#10 -
> > c:\workspace\gary_pc_training\training\main.c ====
> > > @@ -30,7 +30,6 @@
> > >
> > > #include <sys\ppc440sp_board.h>
> > > #include <ppclib.h>
> > > -#include <asynclib.h>
> > > #include <stdio.h>
> > > #include <sys\tcpiplib.h>
> > > #include <serial.h>
> > > @@ -41,12 +40,13 @@
> > > /* SDRAM MICRON */
> > > #define SDRAM_MICRON 0x2C
> > >
> > > -#define SDRAM_TRUE 1
> > > +#define SDRAM_TRUE 2
> > > #define SDRyAM_FALSE 0
> > > #define SDRAM_DDR1 1
> > > #define SDRAM_DDR2 2
> > > #define SDRAM_NONE 0
> > > #define MAXDIMMS 2
> > > +#define max 3
> > > #define MAXRANKS 2 /* Changes le 12/01/05
> pour
> > 1.6*/
> > > #define MAXBANKSPERDIMM 8
> > > #define MAXRANKSPERDIMM 2
> > > ==== //training/test_dir/mainTG.c#1 -
> >
> c:\workspace\gary_pc_training\training\test_dir\mainTG.c
> > ====
> > > @@ -20,8 +20,7 @@
> > >
> >
> #---------------------------------------------------------------------------*/
> > > /* Perform DQS calibration and test memory */
> > >
> > > -#include <sys\ppc440sp_board.h>
> > > -#include <ppclib.h>
> > > +#include <ppc.h>
> > > #include <asynclib.h>
> > > #include <stdio.h>
> > > #include <sys\tcpiplib.h>
> > > @@ -34,6 +33,7 @@
> > > #define SDRAM_MICRON 0x2C
> > >
> > > #define SDRAM_TRUE 1
> > > +#define SDRAM_TRUE 9
> > > #define SDRyAM_FALSE 0
> > > #define SDRAM_DDR1 1
> > > #define SDRAM_DDR2 2
> > >
> > >
> > > Thanks,
> > >
> > >
> > > Gary
> > >
> > > --- On Wed, 5/6/09, David Sitsky <david.sitsky@...>
> > wrote:
> > >
> > >> From: David Sitsky <david.sitsky@...>
> > >> Subject: Re: No new browser window opened up
> after
> > clicked on the line number.
> > >> To: "Gary Yang" <garyyang6@...>
> > >> Cc: codestriker-user@...
> > >> Date: Wednesday, May 6, 2009, 3:14 PM
> > >> This happens when the diff you have
> > >> loaded in doesn't match the
> > >> repository associated with the topic. If
> you
> > have the
> > >> repository set
> > >> to your Perforce depot, and the diff text
> matches
> > the depot
> > >> path, then
> > >> those links will become active again.
> You'll
> > need to
> > >> create new
> > >> topics whenever you change the repository
> string
> > in
> > >> codestriker.conf.
> > >>
> > >> Cheers,
> > >> David
> > >>
> > >> On Thu, May 7, 2009 at 7:56 AM, Gary Yang
> <garyyang6@...>
> > >> wrote:
> > >> >
> > >> > Hi David,
> > >> >
> > >> >
> > >> > I use Perforce and Codestriker 1.9.6. In
> the
> > The
> > >> Codestriker Guide 1.9.5 at the section,
> 3.5.1.
> > Viewing a
> > >> Topic. The last paragraph says below:
> > >> >
> > >> > Each file is broken up into a series of
> > "deltas". At
> > >> the head of each delta block, for both the
> old and
> > new
> > >> versions of the file, there is an indication
> of
> > what line
> > >> number the delta started at. In this
> situation,
> > clicking on
> > >> the "Line 24" link on the left hand side,
> will
> > open a new
> > >> browser window, which will contain the
> complete
> > original
> > >> contents of codestriker/codestriker.pl,
> anchored
> > at line 24.
> > >> Clicking on the "Line 22" link on the right
> hand
> > side will
> > >> contain the complete contents of
> > codestriker/codestriker.pl
> > >> will all of the proposed changes applied.
> > >> >
> > >> > However, when I clicked on the line
> number,
> > there is
> > >> no new browser window opened up. Actually,
> there
> > is no
> > >> hyperlink line under the line number. It is
> > different than
> > >> what I see in the manual. Can you please let
> me
> > know the
> > >> reason?
> > >> >
> > >> >
> > >> > Thanks,
> > >> >
> > >> >
> > >> > Gary
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >>
> > >
> > >
> > >
> > >
> >
>
>
>
>
> ------------------------------------------------------------------------------
> The NEW KODAK i700 Series Scanners deliver under ANY
> circumstances! Your
> production scanning environment may not be a perfect world
> - but thanks to
> Kodak, there's a perfect scanner to get the job done! With
> the NEW KODAK i700
> Series Scanner you'll get full speed at 300 dpi even with
> all image
> processing features enabled. http://p.sf.net/sfu/kodak-com
> _______________________________________________
> Codestriker-user mailing list
> Codestriker-user@...
> https://lists.sourceforge.net/lists/listinfo/codestriker-user
>
|