Enhanced Machine Controller

Modified file emc2/docs/src/gcode/main.lyx

Full file:
<http://cvs.linuxcnc.org/cvs/emc2/docs/src/gcode/main.lyx?rev=1.101>

Difference:
<http://cvs.linuxcnc.org/cvs/emc2/docs/src/gcode/main.lyx.diff?r1=1.100;r2=1.101>

Branch: TRUNK

Log:
revision 1.101
date: 2008/12/24 21:46:56;  author: cradek;  state: Exp;  lines: +3 -3
degression is not a typo

--- main.lyx	2008/12/17 20:34:52	1.100
+++ main.lyx	2008/12/24 21:46:56	1.101
@@ -6564,7 +6564,7 @@
 \family typewriter 
 R-
 \family default 
- digression value is less than 1.0.
+ degression value is less than 1.0.
 \layout Itemize
 
 All the required words are not specified
@@ -6747,7 +6747,7 @@
 \begin_inset Quotes eld
 \end_inset 
 
-depth digression
+depth degression
 \begin_inset Quotes erd
 \end_inset 
 
@@ -6768,7 +6768,7 @@
  selects constant area.
  Values between 1.0 and 2.0 select decreasing depth but increasing area.
  Values above 2.0 select decreasing area.
- Beware that unnecessarily high digression values will cause a large number
+ Beware that unnecessarily high degression values will cause a large number
  of passes to be used.
 \layout Standard