Celestia

Is it KDE3 or KDE4 you're building against?

--Pat

Steve Popovich wrote:
> I installed openSuse 11.1 yesterday and there doesn't seem to be any way 
> of building the kde gui. I'm not sure what is going on. The list of 
> errors is endless.
> I can build the gtk and QT4 gui's though.
> -Steve
> 
> 
> 
> ------------------------------------------------------------------------
> 
> ------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers

I was trying to build while using the KDE3 desktop. But I have both kde3 and kde4 installed. It seems to use both QT3 and QT4 headers. Probably a Suse thing. I'm not too impressed with 11.1. I can't build anything that I'm used to using. Mplayer, ISIS3, etc. I'm probably going to uninstall it. I'll may try 10.3. 10.2 is no longer supported. 10.3 doesn't have much time either.
Steve

--- On Fri, 12/19/08, Pat Suwalski <pat@...> wrote:
From: Pat Suwalski <pat@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: cartrite1@...
Cc: celestia-developers@...
Date: Friday, December 19, 2008, 4:04 PM

Is it KDE3 or KDE4 you're building against?

--Pat

Steve Popovich wrote:
> I installed openSuse 11.1 yesterday and there doesn't seem to be any
way of building the kde gui. I'm not sure what is going on. The list of
errors is endless.
> I can build the gtk and QT4 gui's though.
> -Steve
> 
> 
> 
> ------------------------------------------------------------------------
> 
>
------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers

I've noticed that openSuse 11.1 uses qt3 version 3.3.8b. Suse 10.2 uses qt3.3.7. I guess the newer version broke the kde gui.
-Steve

--- On Fri, 12/19/08, Pat Suwalski <pat@...> wrote:
From: Pat Suwalski <pat@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: cartrite1@...
Cc: celestia-developers@...
Date: Friday, December 19, 2008, 4:04 PM

Is it KDE3 or KDE4 you're building against?

--Pat

Steve Popovich wrote:
> I installed openSuse 11.1 yesterday and there doesn't seem to be any
way of building the kde gui. I'm not sure what is going on. The list of
errors is endless.
> I can build the gtk and QT4 gui's though.
> -Steve
> 
> 
> 
> ------------------------------------------------------------------------
> 
>
------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers

Steve Popovich wrote:
> I've noticed that openSuse 11.1 uses qt3 version 3.3.8b. Suse 10.2 uses 
> qt3.3.7. I guess the newer version broke the kde gui.

I don't buy that. I build against 3.3.8 on Debian.

Can you send some output?

--Pat

Steve,

in the course of the automatic 'smart' updates, I am meanwhile using a much
more recent kde3 lib (3.5.10) with Suse 10.3. I don't have the slightest
problems...

Did you implement ALL SuSE 11.1 updates already!? Usually they are urgently
necessary....

Fridger


Steve Popovich wrote:
> I've noticed that openSuse 11.1 uses qt3 version 3.3.8b. Suse 10.2 uses
> qt3.3.7. I guess the newer version broke the kde gui.
> -Steve
> 
> --- On *Fri, 12/19/08, Pat Suwalski /<pat@...>/* wrote:
> 
>     From: Pat Suwalski <pat@...>
>     Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
>     To: cartrite1@...
>     Cc: celestia-developers@...
>     Date: Friday, December 19, 2008, 4:04 PM
> 
>     Is it KDE3 or KDE4 you're building against?
> 
>     --Pat
> 
>     Steve Popovich wrote:
>     > I installed openSuse 11.1 yesterday and there doesn't seem to be any
>     way of building the kde gui. I'm not sure what is going on. The list of
>     errors is endless.
>     > I can build the gtk and QT4
>      gui's though.
>     > -Steve
>     > 
>     > 
>     > 
>     > ------------------------------------------------------------------------
>     > 
>     >
>     ------------------------------------------------------------------------------
>     > 
>     > 
>     > ------------------------------------------------------------------------
>     > 
>     > _______________________________________________
>     > Celestia-developers mailing list
>     > Celestia-developers@...
>     > https://lists.sourceforge.net/lists/listinfo/celestia-developers
> 
> 
> 
> ------------------------------------------------------------------------
> 
> ------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers

Hi Fridger,
Actually, I've installed it twice now and both times there was updates. Last night I forced kernel updates too. This has a lot more to do with QT4 than kde 3.5.10 though. It may be because both kde3 and kde4 are installed. 11.1 also uses QT4.4.3. QT4 headers in usr/include account for the bulk of the errors. 

I attached terminal output that had all the errors for celsplashscreen.moc.cpp but it may have only gone through to Pat. I recieved an email from sourceforge after I sent the email yesterday saying the attachment was too large and it was being cancelled. 

There is a Celestia kde version 1.5.1 in openSuse 11.1. I've installed that and it works good. I can build QT4 and GTK versions. I'll just have to live with that for a while.

I still have 10.2 installed. I now got a triple boot system. Windows and 11.1 on my old IDE disk and 10.2 on my sata disk. I wonder if I put the repos for 11.1 or 11.0 into SMART on 10.2, I can upgrade 10.2 and get security updates that way. 10.2 was a good system. I'm sad that it is not officially supported anymore.
Steve


--- On Sat, 12/20/08, Fridger Schrempp <fridger.schrempp@...> wrote:
From: Fridger Schrempp <fridger.schrempp@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: cartrite1@...
Cc: "Pat Suwalski" <pat@...>, celestia-developers@...
Date: Saturday, December 20, 2008, 4:07 AM

Steve,

in the course of the automatic 'smart' updates, I am meanwhile using a
much
more recent kde3 lib (3.5.10) with Suse 10.3. I don't have the slightest
problems...

Did you implement ALL SuSE 11.1 updates already!? Usually they are urgently
necessary....

Fridger


Steve Popovich wrote:
> I've noticed that openSuse 11.1 uses qt3 version 3.3.8b. Suse 10.2
uses
> qt3.3.7. I guess the newer version broke the kde gui.
> -Steve
> 
> --- On *Fri, 12/19/08, Pat Suwalski /<pat@...>/* wrote:
> 
>     From: Pat Suwalski <pat@...>
>     Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
>     To: cartrite1@...
>     Cc: celestia-developers@...
>     Date: Friday, December 19, 2008, 4:04 PM
> 
>     Is it KDE3 or KDE4 you're building against?
> 
>     --Pat
> 
>     Steve Popovich wrote:
>     > I installed openSuse 11.1 yesterday and there doesn't seem to
be any
>     way of building the kde gui. I'm not sure what is going on. The
list of
>     errors is endless.
>     > I can build the gtk and QT4
>      gui's though.
>     > -Steve
>     > 
>     > 
>     > 
>     >
------------------------------------------------------------------------
>     > 
>     >
>    
------------------------------------------------------------------------------
>     > 
>     > 
>     >
------------------------------------------------------------------------
>     > 
>     > _______________________________________________
>     > Celestia-developers mailing list
>     > Celestia-developers@...
>     > https://lists.sourceforge.net/lists/listinfo/celestia-developers
> 
> 
> 
> ------------------------------------------------------------------------
> 
>
------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers

At the top of celsplashscreen.moc.cpp it has these lines.
#include <private/qucomextra_p.h>
#if !defined(Q_MOC_OUTPUT_REVISION) || (Q_MOC_OUTPUT_REVISION != 26)
#error "This file was generated using the moc from 3.3.8b. It"
#error "cannot be used with the include files from this version of Qt."
#error "(The moc has changed too much.)"
#endif
Steve

--- On Fri, 12/19/08, Pat Suwalski <pat@...> wrote:
From: Pat Suwalski <pat@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: cartrite1@...
Cc: celestia-developers@...
Date: Friday, December 19, 2008, 9:02 PM

Steve Popovich wrote:
> I've noticed that openSuse 11.1 uses qt3 version 3.3.8b. Suse 10.2
uses qt3.3.7. I guess the newer version broke the kde gui.

I don't buy that. I build against 3.3.8 on Debian.

Can you send some output?

--Pat

My last email probably didn't matter. I got the same stuff when I built kde on suse 10.2.
and that works.
#if !defined(Q_MOC_OUTPUT_REVISION) || (Q_MOC_OUTPUT_REVISION != 26)
#error "This file was generated using the moc from 3.3.7. It"
#error "cannot be used with the include files from this version of Qt."
#error "(The moc has changed too much.)"
#endif
I'm giving up on this for a while. I'm just going to build GTK.
Steve.

--- On Sat, 12/20/08, Steve Popovich <cartrite1@...> wrote:
From: Steve Popovich <cartrite1@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: celestia-developers@...
Date: Saturday, December 20, 2008, 8:28 AM

At the top of celsplashscreen.moc.cpp it has these lines.
#include <private/qucomextra_p.h>
#if !defined(Q_MOC_OUTPUT_REVISION) || (Q_MOC_OUTPUT_REVISION != 26)
#error "This file was generated using the moc from 3.3.8b. It"
#error "cannot be used with the include files from this version of Qt."
#error "(The moc has changed too much.)"
#endif
Steve

--- On Fri, 12/19/08, Pat Suwalski <pat@...> wrote:
From: Pat Suwalski <pat@...>
Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
To: cartrite1@...
Cc: celestia-developers@...
Date: Friday, December 19, 2008, 9:02 PM

Steve Popovich wrote:
> I've noticed that openSuse
 11.1 uses qt3 version 3.3.8b. Suse 10.2
uses qt3.3.7. I guess the newer version broke the kde gui.

I don't buy that. I build against 3.3.8 on Debian.

Can you send some output?

--Pat



      ------------------------------------------------------------------------------
_______________________________________________
Celestia-developers mailing list
Celestia-developers@...
https://lists.sourceforge.net/lists/listinfo/celestia-developers

Sorry I was away all weekend.

Make sure that moc and qmake are both for the correct version of Qt. 
That's Qt3 for KDE and Qt4 for Qt4 (hm.).

--Pat

Steve Popovich wrote:
> At the top of celsplashscreen.moc.cpp it has these lines.
> #include <private/qucomextra_p.h>
> #if !defined(Q_MOC_OUTPUT_REVISION) || (Q_MOC_OUTPUT_REVISION != 26)
> #error "This file was generated using the moc from 3.3.8b. It"
> #error "cannot be used with the include files from this version of Qt."
> #error "(The moc has changed too much.)"
> #endif
> Steve
> 
> --- On *Fri, 12/19/08, Pat Suwalski /<pat@...>/* wrote:
> 
>     From: Pat Suwalski <pat@...>
>     Subject: Re: [Celestia-developers] openSuse 11.1 and the kde version
>     To: cartrite1@...
>     Cc: celestia-developers@...
>     Date: Friday, December 19, 2008, 9:02 PM
> 
>     Steve Popovich wrote:
>     > I've noticed that openSuse
>      11.1 uses qt3 version 3.3.8b. Suse 10.2
>     uses qt3.3.7. I guess the newer version broke the kde gui.
> 
>     I don't buy that. I build against 3.3.8 on Debian.
> 
>     Can you send some output?
> 
>     --Pat
> 
> 
> 
> ------------------------------------------------------------------------
> 
> ------------------------------------------------------------------------------
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Celestia-developers mailing list
> Celestia-developers@...
> https://lists.sourceforge.net/lists/listinfo/celestia-developers