On Fri 28 Nov 21:52 2008 Nigel Henry wrote:
> On Friday 28 November 2008 18:48, eial@... wrote:
> > I've installed alsa 1.0.18, the card is configured but still no sound is
> > out of the speakers....
> >
> > how can I fix it?
> >
> >
> > here is a dmesg output:
> > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> > HDA Intel 0000:00:1b.0: setting latency timer to 64
> > input: HDA Digital PCBeep as /class/input/input11
> > input: HDA Intel at 0xf6ffc000 irq 21 Mic at Ext Left Jack as
> > /class/input/input12 input: HDA Intel at 0xf6ffc000 irq 21 HP Out at Ext
> > Left Jack as /class/input/input13 input: HDA Intel at 0xf6ffc000 irq 21 HP
> > Out at Ext Left Jack as /class/input/input14 HDA Intel 0000:01:00.1: PCI
> > INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:01:00.1: setting
> > latency timer to 64
> > usbcore: registered new interface driver snd-usb-audio
> >
> > please help, this is getting ridicules
>
> A bit of info please, to get the ball rolling.
>
sure' lets go:
> Is that the 1.0.18 alsadriver, or the 1.0.18a one you have installed?
alsa version 1.0.18
> Which distro are you using, and which desktop (KDE, Gnome)
gentoo profile 2008 running kde 3.5.9
>
> The ouput of the commands as below.
>
> cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf6ffc000 irq 21
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xf6dec000 irq 17
> cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.18.
Compiled on Nov 28 2008 for kernel 2.6.27-gentoo-r4 (SMP).
> lsmod | grep snd (may be /sbin/lsmod, depending on your distro)
snd_pcm_oss 33248 0
snd_mixer_oss 12928 1 snd_pcm_oss
snd_seq_oss 28096 0
snd_seq_midi_event 4736 1 snd_seq_oss
snd_seq 41264 4 snd_seq_oss,snd_seq_midi_event
snd_usb_audio 60720 0
snd_usb_lib 12416 1 snd_usb_audio
snd_rawmidi 16224 1 snd_usb_lib
snd_seq_device 5332 3 snd_seq_oss,snd_seq,snd_rawmidi
snd_hda_intel 415108 0
snd_pcm 56264 3 snd_pcm_oss,snd_usb_audio,snd_hda_
snd_timer 16272 2 snd_seq,snd_pcm
snd_page_alloc 7248 2 snd_hda_intel,snd_pcm
snd_hwdep 6600 2 snd_usb_audio,snd_hda_intel
snd 43256 12 snd_pcm_oss,snd_mixer_oss,snd_seq nd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hda_intel, mer,snd_hwdep
soundcore 6736 1 snd
> lspci -vn (may be /sbin/lspci -vn, and just the bit for the
> soundcard)
00:1b.0 0403: 8086:284b (rev 04)
Subsystem: 1028:0254
Flags: bus master, fast devsel, latency 0, IRQ 21
Memory at f6ffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.1 0403: 1002:aa28
Subsystem: 1028:0254
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f6dec000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [100] Vendor Specific Information <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
> grep ^Codec /proc/asound/card?/codec*
/proc/asound/card0/codec#0:Codec: IDT 92HD73C1X5
/proc/asound/card1/codec#0:Codec: ATI ATI R6xx HDMI
>
> Open alsamixer on the CLI (Gnomes terminal, or KDE's Konsole), and check for
> muted controls (the M key toggles mute/unmute), and also that sliders like
> Master, PCM, Front, and CD are up.
headphones are muted, master and front are at max, no cd slider
>
> If your distro has Pulseaudio installed, you may just see one slider. If that
> is the case, close alsamixer using the ESC key, and reopen alsamixer as below
> to view all the controls
>
> alsamixer -D hw:0
>
> Some things plugged into the USB (usb midi keyboards, webcams, with mics, etc)
> can also create problems, and again depending on your distro. The USB is
> started early in the boot process, and you can find that the USB device has
> grabbed card0, and the actual soundcard which defaults to card0, can no
> longer use it. There's an easy fix if that is the problem.
>
have no idea if it can me the issue, I'm using a usb mouse here and there and my camara is usb
> That's enough for the moment. Post back, and we'll see how things go.
hope this works...
>
> Nigel.
>
>
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>
|