Read and respond to this message at:
I added time.sleep(0.2) to S3.py as you suggested. Upload rate dropped to ~21
KB/s, from ~1.6 MB/s. After about 10 minutes of watching the 40 MB file trickle
out, I decided to try a simultaneous upload using another tool (trial version
of Bucket Explorer), while s3cmd continued to trickle to S3. The second file
(1.3 GB) successfully uploaded at ~1.6 MB/s without issue. When it completed,
upload rate returned to ~21 KB/s as s3cmd continued to trickle. Upload completed
successfully some minutes later.
I commented out the "time.sleep" call and re-ran s3cmd on the 40 MB file. This
time, upload was successful. Then I ran it on the 1.3 GB file, and got the
same error I posted originally.
s3cmd -v --> same error, at 0% of file uploaded
s3cmd -vd --> same error, at 7% of file uploaded
Uncomment "time.sleep(0.2)", modify it to "time.sleep(0.01)", s3cmd -vd -->
runs at reduced upload speed (345 KB/s) and completes succesfully.
I am on a university network. My machine:
- Dell Precision 690
- two dual-core Xeon 5160 processors running at 3.0 GHz
- 32 GB of RAM
- Ubuntu 7.10
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit: