Hi,
after upgrading to alsa 1.0.9rc1 my ua-25 in now only recognized in
advance mode! Funny, in 1.0.4 it was the opposite.
Another question. The following cards are found in the asound directory:
0 [MOTIF7 ]: USB-Audio - MOTIF7
Yamaha MOTIF7 at usb-0000:00:05.2-1.4, full speed
1 [UA25 ]: USB-Audio - UA-25
EDIROL UA-25 at usb-0000:00:05.2-1.3, full speed
2 [default ]: H-DSP - Hammerfall DSP
RME Hammerfall DSP + Multiface at 0x10800000, irq 11
The Edirol runs in realtime mode, the multiface doesn 't run with jack
at the moment. Can this be a problem of permission for the pcmcia bus?
23:29:42.852 /usr/bin/jackd -v -R -P15 -dalsa -ddefault -r48000 -p64 -n6
-i2 -o2
23:29:42.902 JACK was started with PID=3478 (0xd96).
cannot write to jackstart sync pipe 4 (Bad file descriptor)
jackd: wait for startup process exit failed
getting driver descriptor from /usr/lib/libjack0.80.0-0/jack_alsa.so
getting driver descriptor from /usr/lib/libjack0.80.0-0/jack_dummy.so
getting driver descriptor from /usr/lib/libjack0.80.0-0/jack_oss.so
jackd 0.99.0
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
registered builtin port type 32 bit float mono audio
required capabilities not available
capabilities: = cap_ipc_lock,cap_sys_nice,cap_sys_resource+ep
loading driver ..
new client: alsa_pcm, id = 1 type 1 @ 0x8057a30 fd = -1
apparent rate = 48000
creating alsa driver ...
default|default|64|6|48000|2|2|nomon|swmeter|-|32bit
ALSA lib confmisc.c:550:(snd_determine_driver) could not open control
for card 0
ALSA lib conf.c:3461:(_snd_config_evaluate) function
snd_func_card_driver returned error: No such device
ALSA lib confmisc.c:387:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3461:(_snd_config_evaluate) function snd_func_concat
returned error: No such device
ALSA lib confmisc.c:945:(snd_func_refer) error evaluating name
ALSA lib conf.c:3461:(_snd_config_evaluate) function snd_func_refer
returned error: No such device
ALSA lib conf.c:3930:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2068:(snd_pcm_open_noupdate) Unknown PCM default
ALSA lib confmisc.c:550:(snd_determine_driver) could not open control
for card 0
ALSA lib conf.c:3461:(_snd_config_evaluate) function
snd_func_card_driver returned error: No such device
ALSA lib confmisc.c:387:(snd_func_concat) error evaluating strings
ALSA lib conf.c:3461:(_snd_config_evaluate) function snd_func_concat
returned error: No such device
ALSA lib confmisc.c:945:(snd_func_refer) error evaluating name
ALSA lib conf.c:3461:(_snd_config_evaluate) function snd_func_refer
returned error: No such device
ALSA lib conf.c:3930:(snd_config_expand) Evaluate error: No such device
ALSA lib pcm.c:2068:(snd_pcm_open_noupdate) Unknown PCM default
ALSA: Cannot open PCM device alsa_pcm for playback. Falling back to
capture-only mode
cannot load driver module alsa
23:29:44.043 JACK was stopped successfully.
23:29:45.103 Could not connect to JACK server as client.
Regards
Bolko
|