Advanced Linux Sound Architecture

Hello,

compilation auf alsa-driver-0.9.7 stops with the following message.
What can I do?

Ralph


=2E.....
ln -sf ../usb/snd-usb-audio.o=20
/usr/local/src/alsa-driver-0.9.7/modules/snd-usb-audio.o
rm -f snd-usb-audio.o
ld  -r -o snd-usb-audio.o usbaudio.o usbmixer.o usbmidi.o usbcompat.o
make  -C us428 modules
make[2]: Wechsel in das Verzeichnis=20
=BB/usr/local/src/alsa-driver-0.9.7/usb/us428=AB
gcc -D__KERNEL__ -DMODULE=3D1 -I/usr/local/src/alsa-driver-0.9.7/include =
=20
-I/lib/modules/2.4.19-4GB/build/include -O2 -mpreferred-stack-boundary=3D=
2=20
-march=3Di586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer=20
-Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD =20
-DKBUILD_BASENAME=3Dusbus428   -c -o usbus428.o usbus428.c
In file included from usbus428.c:72:
usbus428.h:11: redefinition of `urb_t'
/lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `urb_t' previously=
=20
declared here
usbus428.h:12: redefinition of `purb_t'
/lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `purb_t' previousl=
y=20
declared here
make[2]: *** [usbus428.o] Fehler 1
make[2]: Verlassen des Verzeichnisses=20
=BB/usr/local/src/alsa-driver-0.9.7/usb/us428=AB
make[1]: *** [_modsubdir_us428] Fehler 2
make[1]: Verlassen des Verzeichnisses =BB/usr/local/src/alsa-driver-0.9.7=
/usb=AB
make: *** [compile] Fehler 1
linux:/usr/local/src/alsa-driver-0.9.7 #=20

At Mon, 29 Sep 2003 21:32:36 +0200,
Ralph Trautner wrote:
> 
> Hello,
> 
> compilation auf alsa-driver-0.9.7 stops with the following message.
> What can I do?

remove the definitions of urb_t and purb_t in usbus428.h.


Takashi

> 
> Ralph
> 
> 
> ......
> ln -sf ../usb/snd-usb-audio.o 
> /usr/local/src/alsa-driver-0.9.7/modules/snd-usb-audio.o
> rm -f snd-usb-audio.o
> ld  -r -o snd-usb-audio.o usbaudio.o usbmixer.o usbmidi.o usbcompat.o
> make  -C us428 modules
> make[2]: Wechsel in das Verzeichnis 
> »/usr/local/src/alsa-driver-0.9.7/usb/us428«
> gcc -D__KERNEL__ -DMODULE=1 -I/usr/local/src/alsa-driver-0.9.7/include  
> -I/lib/modules/2.4.19-4GB/build/include -O2 -mpreferred-stack-boundary=2 
> -march=i586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer 
> -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD  
> -DKBUILD_BASENAME=usbus428   -c -o usbus428.o usbus428.c
> In file included from usbus428.c:72:
> usbus428.h:11: redefinition of `urb_t'
> /lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `urb_t' previously 
> declared here
> usbus428.h:12: redefinition of `purb_t'
> /lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `purb_t' previously 
> declared here
> make[2]: *** [usbus428.o] Fehler 1
> make[2]: Verlassen des Verzeichnisses 
> »/usr/local/src/alsa-driver-0.9.7/usb/us428«
> make[1]: *** [_modsubdir_us428] Fehler 2
> make[1]: Verlassen des Verzeichnisses »/usr/local/src/alsa-driver-0.9.7/usb«
> make: *** [compile] Fehler 1
> linux:/usr/local/src/alsa-driver-0.9.7 # 
> 
> 
> 
> 
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>

At Mon, 29 Sep 2003 08:54:09 -0400 (EDT),
Adam K Kirchhoff wrote:
> 
> 
> I sent this e-mail out to alsa-devel back in April.  When I didn't get a
> response, I switched to the open source driver from Creative and got four
> speakers working again.  However, since installing Slackware 9.1 over the
> weekend, I thought I'd give the latest version of the alsa drivers another
> try..  But I'm still only getting output from two of the four speakers...

raise "Wave Surround" instead of "Surround".
the former is the routing of the normal PCM to surround outputs,
while the latter is the volume of surround PCM channels.

the same is true for "Wave Center/LFE" and "Center/LFE".


Takashi

> 
> Here's the original message:
> 
> ---------- Forwarded message ----------
> Date: Sun, 06 Apr 2003 16:23:36 -0400 (EDT)
> From: Adam K Kirchhoff <adamk@...>
> To: alsa-devel@...
> Subject: [Alsa-devel] Live! & eMicro 28028
> 
> 
> I used to have a SB Live! in my machine at home that recently died.  A
> quick run out to the store, and I replaced it with another SB Live!
> 
> The problem is that I can't get this Live! to do four speaker output.
> alsamixer identifies the chip as an "eMicro 28028".  I have "Surround" all
> the way to 100%, as is "Center", "Wave", and "Wave Center".  Is there
> something I'm missing, or is this just not supported with on this version
> of the Live!?
> 
> Adam
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: ValueWeb:
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> No other company gives more support or power for your dedicated server
> http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel@...
> https://lists.sourceforge.net/lists/listinfo/alsa-devel
> 
> 
> 
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>

It works
thank you
Ralph

Am Dienstag, 30. September 2003 13:11 schrieb Takashi Iwai:
> At Mon, 29 Sep 2003 21:32:36 +0200,
>
> Ralph Trautner wrote:
> > Hello,
> >
> > compilation auf alsa-driver-0.9.7 stops with the following message.
> > What can I do?
>
> remove the definitions of urb_t and purb_t in usbus428.h.
>
>
> Takashi
>
> > Ralph
> >
> >
> > ......
> > ln -sf ../usb/snd-usb-audio.o
> > /usr/local/src/alsa-driver-0.9.7/modules/snd-usb-audio.o
> > rm -f snd-usb-audio.o
> > ld  -r -o snd-usb-audio.o usbaudio.o usbmixer.o usbmidi.o usbcompat.o
> > make  -C us428 modules
> > make[2]: Wechsel in das Verzeichnis
> > =BB/usr/local/src/alsa-driver-0.9.7/usb/us428=AB
> > gcc -D__KERNEL__ -DMODULE=3D1 -I/usr/local/src/alsa-driver-0.9.7/incl=
ude
> > -I/lib/modules/2.4.19-4GB/build/include -O2 -mpreferred-stack-boundar=
y=3D2
> > -march=3Di586 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer
> > -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUIL=
D
> > -DKBUILD_BASENAME=3Dusbus428   -c -o usbus428.o usbus428.c
> > In file included from usbus428.c:72:
> > usbus428.h:11: redefinition of `urb_t'
> > /lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `urb_t' previo=
usly
> > declared here
> > usbus428.h:12: redefinition of `purb_t'
> > /lib/modules/2.4.19-4GB/build/include/linux/usb.h:473: `purb_t'
> > previously declared here
> > make[2]: *** [usbus428.o] Fehler 1
> > make[2]: Verlassen des Verzeichnisses
> > =BB/usr/local/src/alsa-driver-0.9.7/usb/us428=AB
> > make[1]: *** [_modsubdir_us428] Fehler 2
> > make[1]: Verlassen des Verzeichnisses
> > =BB/usr/local/src/alsa-driver-0.9.7/usb=AB make: *** [compile] Fehler=
 1
> > linux:/usr/local/src/alsa-driver-0.9.7 #
> >
> >
> >
> >
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Alsa-user mailing list
> > Alsa-user@...
> > https://lists.sourceforge.net/lists/listinfo/alsa-user
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user

Takashi,

	"Wave Surround" is currently maxed out, and I'm still only getting
audio from the front speakers.  In fact, looking at alsamixer, I'm
noticing that there's no option for "3D Control - Switch," "3D Control
Sigmatel - Depth," or "3D Control Sigmatel - Rear Depth".  All three
options currently show up for my SB Live! at work (Chip: SigmaTel
STA9708/11).

	Any more ideas?

Adam

On Tue, 30 Sep 2003, Takashi Iwai wrote:

> At Mon, 29 Sep 2003 08:54:09 -0400 (EDT),
> Adam K Kirchhoff wrote:
> >
> >
> > I sent this e-mail out to alsa-devel back in April.  When I didn't get a
> > response, I switched to the open source driver from Creative and got four
> > speakers working again.  However, since installing Slackware 9.1 over the
> > weekend, I thought I'd give the latest version of the alsa drivers another
> > try..  But I'm still only getting output from two of the four speakers...
>
> raise "Wave Surround" instead of "Surround".
> the former is the routing of the normal PCM to surround outputs,
> while the latter is the volume of surround PCM channels.
>
> the same is true for "Wave Center/LFE" and "Center/LFE".
>
>
> Takashi
>
> >
> > Here's the original message:
> >
> > ---------- Forwarded message ----------
> > Date: Sun, 06 Apr 2003 16:23:36 -0400 (EDT)
> > From: Adam K Kirchhoff <adamk@...>
> > To: alsa-devel@...
> > Subject: [Alsa-devel] Live! & eMicro 28028
> >
> >
> > I used to have a SB Live! in my machine at home that recently died.  A
> > quick run out to the store, and I replaced it with another SB Live!
> >
> > The problem is that I can't get this Live! to do four speaker output.
> > alsamixer identifies the chip as an "eMicro 28028".  I have "Surround" all
> > the way to 100%, as is "Center", "Wave", and "Wave Center".  Is there
> > something I'm missing, or is this just not supported with on this version
> > of the Live!?
> >
> > Adam
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: ValueWeb:
> > Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> > No other company gives more support or power for your dedicated server
> > http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> > _______________________________________________
> > Alsa-devel mailing list
> > Alsa-devel@...
> > https://lists.sourceforge.net/lists/listinfo/alsa-devel
> >
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > Alsa-user mailing list
> > Alsa-user@...
> > https://lists.sourceforge.net/lists/listinfo/alsa-user
> >
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>

At Sat, 4 Oct 2003 10:35:22 -0400 (EDT),
Adam K Kirchhoff wrote:
> 
> 
> Takashi,
> 
> 	"Wave Surround" is currently maxed out, and I'm still only getting
> audio from the front speakers.  In fact, looking at alsamixer, I'm
> noticing that there's no option for "3D Control - Switch," "3D Control
> Sigmatel - Depth," or "3D Control Sigmatel - Rear Depth".  All three
> options currently show up for my SB Live! at work (Chip: SigmaTel
> STA9708/11).

these "3D xxx" switches are for the 3D enhancement switches on ac97
codec, and apparently they don't work although they exist.  so, it has
nothing to do with the real surround output.

i have no exact idea what happens there.  to check more preceisely,
please attach the content of /etc/asound.state.


ciao,

Takashi

On Mon, 6 Oct 2003, Takashi Iwai wrote:

> At Sat, 4 Oct 2003 10:35:22 -0400 (EDT),
> Adam K Kirchhoff wrote:
> >
> >
> > Takashi,
> >
> > 	"Wave Surround" is currently maxed out, and I'm still only getting
> > audio from the front speakers.  In fact, looking at alsamixer, I'm
> > noticing that there's no option for "3D Control - Switch," "3D Control
> > Sigmatel - Depth," or "3D Control Sigmatel - Rear Depth".  All three
> > options currently show up for my SB Live! at work (Chip: SigmaTel
> > STA9708/11).
>
> these "3D xxx" switches are for the 3D enhancement switches on ac97
> codec, and apparently they don't work although they exist.  so, it has
> nothing to do with the real surround output.
>
> i have no exact idea what happens there.  to check more preceisely,
> please attach the content of /etc/asound.state.

I've posted it at:

http://memory.visualtech.com/asound.state

I'm at something of a loss, so any ideas would be helpful :-)

Adam

Problem solved.  There's a switch for "SB Live Analog/Digital Output Jack"
that I need to have set to Off, and suddenly four speaker output works.

Adam

On Mon, 6 Oct 2003, Adam K Kirchhoff wrote:

>
> On Mon, 6 Oct 2003, Takashi Iwai wrote:
>
> > At Sat, 4 Oct 2003 10:35:22 -0400 (EDT),
> > Adam K Kirchhoff wrote:
> > >
> > >
> > > Takashi,
> > >
> > > 	"Wave Surround" is currently maxed out, and I'm still only getting
> > > audio from the front speakers.  In fact, looking at alsamixer, I'm
> > > noticing that there's no option for "3D Control - Switch," "3D Control
> > > Sigmatel - Depth," or "3D Control Sigmatel - Rear Depth".  All three
> > > options currently show up for my SB Live! at work (Chip: SigmaTel
> > > STA9708/11).
> >
> > these "3D xxx" switches are for the 3D enhancement switches on ac97
> > codec, and apparently they don't work although they exist.  so, it has
> > nothing to do with the real surround output.
> >
> > i have no exact idea what happens there.  to check more preceisely,
> > please attach the content of /etc/asound.state.
>
> I've posted it at:
>
> http://memory.visualtech.com/asound.state
>
> I'm at something of a loss, so any ideas would be helpful :-)
>
> Adam
>
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> Alsa-user mailing list
> Alsa-user@...
> https://lists.sourceforge.net/lists/listinfo/alsa-user
>