PLplot

On Feb 8, 2006, at 2:04 PM, plplot-devel- 
request@... wrote:

> otool -L drivers/.libs/aqt.so
> drivers/.libs/aqt.so:
>          /usr/local/lib/libfreetype.6.dylib (compatibility version
> 10.0.0, current version 10.7.0)
>          /usr/local/lib/libplplotd.9.dylib (compatibility version
> 12.0.0, current version 12.0.0)
>          /usr/local/lib/libcsirocsa.0.dylib (compatibility version
> 1.0.0, current version 1.1.0)
>          /Library/Frameworks/AquaTerm.framework/Versions/A/AquaTerm
> (compatibility version 1.0.0, current version 1.0.0)
>          /usr/lib/libobjc.A.dylib (compatibility version 1.0.0,
> current version 227.0.0)
>          /usr/lib/libSystem.B.dylib (compatibility version 1.0.0,
> current version 88.1.2)
>          /System/Library/Frameworks/Foundation.framework/Versions/C/
> Foundation (compatibility version 300.0.0, current version 567.21.0)
>          /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current
> version 92.0.0)


Here is my output:

oTool -L aqt.so
aqt.so:
         /sw/lib/libplplotd.9.dylib (compatibility version 12.0.0,  
current version 12.0.0)
         /sw/lib/libcsirocsa.0.dylib (compatibility version 1.0.0,  
current version 1.1.0)
         /sw/lib/libcsironn.0.dylib (compatibility version 1.0.0,  
current version 1.1.0)
         /sw/Library/Frameworks/AquaTerm.framework/Versions/A/ 
AquaTerm (compatibility version 1.0.0, current version 1.0.0)
         /usr/lib/libobjc.A.dylib (compatibility version 1.0.0,  
current version 227.0.0)
         /usr/lib/libSystem.B.dylib (compatibility version 1.0.0,  
current version 88.1.2)
         /System/Library/Frameworks/Foundation.framework/Versions/C/ 
Foundation (compatibility version 300.0.0, current version 567.21.0)


- Koen.

On 2006-02-08 19:12-0500 Koen van der Drift wrote:

>
> On Feb 8, 2006, at 2:04 PM, plplot-devel-request@... wrote:
>
>> otool -L drivers/.libs/aqt.so
>> drivers/.libs/aqt.so:
>>          /usr/local/lib/libfreetype.6.dylib (compatibility version
>> 10.0.0, current version 10.7.0)
>>          /usr/local/lib/libplplotd.9.dylib (compatibility version
>> 12.0.0, current version 12.0.0)
>>          /usr/local/lib/libcsirocsa.0.dylib (compatibility version
>> 1.0.0, current version 1.1.0)
>>          /Library/Frameworks/AquaTerm.framework/Versions/A/AquaTerm
>> (compatibility version 1.0.0, current version 1.0.0)
>>          /usr/lib/libobjc.A.dylib (compatibility version 1.0.0,
>> current version 227.0.0)
>>          /usr/lib/libSystem.B.dylib (compatibility version 1.0.0,
>> current version 88.1.2)
>>          /System/Library/Frameworks/Foundation.framework/Versions/C/
>> Foundation (compatibility version 300.0.0, current version 567.21.0)
>>          /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current
>> version 92.0.0)
>
>
> Here is my output:
>
> oTool -L aqt.so
> aqt.so:
>        /sw/lib/libplplotd.9.dylib (compatibility version 12.0.0, current 
> version 12.0.0)
>        /sw/lib/libcsirocsa.0.dylib (compatibility version 1.0.0, current 
> version 1.1.0)
>        /sw/lib/libcsironn.0.dylib (compatibility version 1.0.0, current 
> version 1.1.0)
>        /sw/Library/Frameworks/AquaTerm.framework/Versions/A/AquaTerm 
> (compatibility version 1.0.0, current version 1.0.0)
>        /usr/lib/libobjc.A.dylib (compatibility version 1.0.0, current 
> version 227.0.0)
>        /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current 
> version 88.1.2)
>        /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation 
> (compatibility version 300.0.0, current version 567.21.0)
>

The difference between the two lists is Per's version includes libfreetype
and libmx, and Koen's does not.  The difference in libfreetype dependence
could come in via libplplot and how it was configured on Per's and Koen's
systems.  It's possible aquaterm depends on libfreetype as well, but since
Koen's oTool (or is that otool?) run didn't seem to indicate any problems, I
assume it does not.

Koen, could you please confirm that (a) the aqt driver builds without errors
on your system, and (b) that it works at run time?

Alan
__________________________
Alan W. Irwin
email: irwin@...
phone: 250-727-2902

Astronomical research affiliation with Department of Physics and Astronomy,
University of Victoria (astrowww.phys.uvic.ca).

Programming affiliations with the FreeEOS equation-of-state implementation
for stellar interiors (freeeos.sf.net); PLplot scientific plotting software
package (plplot.org); the Yorick front-end to PLplot (yplot.sf.net); the
Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project
(lbproject.sf.net).
__________________________

Linux-powered Science
__________________________

On Feb 8, 2006, at 8:13 PM, Alan W. Irwin wrote:

> Koen, could you please confirm that (a) the aqt driver builds  
> without errors
> on your system, and (b) that it works at run time?


Alan,

I assume it builds without errors, since plplot completes building.  
Please refresh my memory on how to test the driver at runtime.

- Koen.

On 2006-02-08 20:28-0500 Koen van der Drift wrote:

>
> On Feb 8, 2006, at 8:13 PM, Alan W. Irwin wrote:
>
>> Koen, could you please confirm that (a) the aqt driver builds without 
>> errors
>> on your system, and (b) that it works at run time?
>
>
> Alan,
>
> I assume it builds without errors, since plplot completes building. Please 
> refresh my memory on how to test the driver at runtime.

If you really have the python interface working, then after "make install"
change directory to the installed python examples directory, e.g.,

cd  $prefix/share/plplot5.5.3/examples/python

and execute the first example:

./x01

It should give you a menu of every device driver available on your system
including the aqt one.

Alternatively specify the aqt device driver on the command line, e.g.,

./x01 -dev aqt

Alan

__________________________
Alan W. Irwin
email: irwin@...
phone: 250-727-2902

Astronomical research affiliation with Department of Physics and Astronomy,
University of Victoria (astrowww.phys.uvic.ca).

Programming affiliations with the FreeEOS equation-of-state implementation
for stellar interiors (freeeos.sf.net); PLplot scientific plotting software
package (plplot.org); the Yorick front-end to PLplot (yplot.sf.net); the
Loads of Linux Links project (loll.sf.net); and the Linux Brochure Project
(lbproject.sf.net).
__________________________

Linux-powered Science
__________________________

>
> cd  $prefix/share/plplot5.5.3/examples/python
>
> and execute the first example:
>
> ./x01
>
> It should give you a menu of every device driver available on your  
> system
> including the aqt one.
>
> Alternatively specify the aqt device driver on the command line, e.g.,
>
> ./x01 -dev aqt

Both give the following result:

Traceback (most recent call last):
   File "./x01", line 28, in ?
     from plplot import *
   File "/sw/lib/python2.4/site-packages/plplot.py", line 20, in ?
     from plplotc import *
   File "/sw/lib/python2.4/site-packages/plplotc.py", line 5, in ?
     import _plplotc
ImportError: No module named _numpy


I have numeric installed thorugh fink.

- Koen.

On Feb 9, 2006, at 6:40 AM, Koen van der Drift wrote:

> Both give the following result:
>
> Traceback (most recent call last):
>   File "./x01", line 28, in ?
>     from plplot import *
>   File "/sw/lib/python2.4/site-packages/plplot.py", line 20, in ?
>     from plplotc import *
>   File "/sw/lib/python2.4/site-packages/plplotc.py", line 5, in ?
>     import _plplotc
> ImportError: No module named _numpy
>
>
> I have numeric installed thorugh fink.


Sorry for the confusion,  both actually do work.

- Koen.