Linux Infrared Remote Control

Hi Stefan,

Thank you very much! That's exactly the info I was looking for. I'd got as
far as using the 'events 0' program myself, but was at a loss as to where
I should go from there. Your explanation is clear and I'm going to try it
out now.

Thanks again,
David.

> Date: Fri, 26 Sep 2003 11:38:38 +0200
> From: Stefan Lange <hoirkman@...>
> To: lirc-list@...
> Subject: Re: LIRC and /dev/input/eventX

[snip]

> Hi, yesterday I was going through almost the same problems, and I
> finally got it running :)

[snipped useful stuff]

Stefan and list,

I have had great success with the method you proposed. For the record,
here is my /etc/lircd.conf:

begin remote

  name  flyvideo3000

  begin codes

    AIR_CATV            0x00010182
    VIDEO               0x00010189
    AUDIO               0x00010188
    POWER               0x00010074
    AV_SOURCE           0x000100b0
    FULLSCREEN          0x00010174
    STEREO              0x00010079
    MUTE                0x00010071
    VOLUME_UP           0x00010073
    VOLUME_DOWN         0x00010072
    CHANNEL_UP          0x00010192
    CHANNEL_DOWN        0x00010193
    RECALL              0x00010081
    ENTER               0x00010060
    1                   0x0001004f
    2                   0x00010050
    3                   0x00010051
    4                   0x0001004b
    5                   0x0001004c
    6                   0x0001004d
    7                   0x00010047
    8                   0x00010048
    9                   0x00010049
    0                   0x00010052

  end codes

end remote


I have a Lifeview Flyvideo 3000 and I've had a ball setting up Mplayer,
xmms, xawtv and smartmenu.

Thanks very much!

David.


Stefan Lange wrote on Fri, 26 Sep 2003 11:38:38 +0200:
> Now proceed to add all your other buttons, restart lircd, and it should
> hopefully work.
>
> I hope my bttv-results can be useful for saa7134 also. Good luck!

David Antliff wrote:
> Stefan and list,
> 
> I have had great success with the method you proposed. For the record,
> here is my /etc/lircd.conf:
[...]
> 
> Thanks very much!
> 

You're welcome, I'm glad I could help ;-)

Here's my lircd.conf for a "hauppauge win-tv pci" remote, if anyone is
interested.

begin remote
   name  Hauppauge
       begin codes
         BTN_0                   0x00010100
         BTN_1                   0x00010101
         BTN_2                   0x00010102
         BTN_3                   0x00010103
         BTN_4                   0x00010104
         BTN_5                   0x00010105
         BTN_6                   0x00010106
         BTN_7                   0x00010107
         BTN_8                   0x00010108
         BTN_9                   0x00010109
         KEY_MUTE                0x00010071
         KEY_VOLUMEUP            0x00010073
         KEY_VOLUMEDOWN          0x00010072
         KEY_COFFEE              0x00010098
         KEY_CYCLEWINDOWS        0x0001009a
         KEY_RADIO               0x00010181
         KEY_TV                  0x00010179
         KEY_CHANNELUP           0x00010192
         KEY_CHANNELDOWN         0x00010193
         KEY_CHANNEL             0x0001016b
         KEY_ZOOM                0x00010174
       end codes
end remote



> David.
> 
[...]